SMM Morning Comment For SHFE Base Metals August 7

Telah Terbit: Aug 7, 2023 10:12
Sumber: SMM
LME copper closed at $8,548.5/mt last Friday evening, a drop of 1.05%.

SHANGHAI, August 7 (SMM) –

Copper

LME copper closed at $8,548.5/mt last Friday evening, a drop of 1.05%. Trading volume was 17,000 lots and open interest stood at 286,000 lots.

The most active SHFE 2309 copper contract finished at 69,070 yuan/mt overnight, down 0.23%. Trading volume was 39,000 lots, and open interest stood at 182,000 lots.

Aluminum

Last Friday night, the most-traded SHFE 2309 aluminium contract opened at 18,460 yuan/mt, with the lowest and highest prices at 18,440 yuan/mt and 18,530 yuan/mt before closing at 18,520 yuan/mt, up 15 yuan/mt or 0.08% from the previous trading day. LME aluminium opened at $2,224/mt last Friday, with its high and low at $2,224 /mt and $2,205/mt respectively before closing at $2,239/mt, an increase of $15/mt or 0.7% from the previous trading day.

On the macro front, the US private employment data enhanced expectations for the Fed’s interest rate hike, and the US dollar index rebounded, weighing down the overall non-ferrous metals. In order to boost demand, there may be more favorable policies to be poured out in China in the future. Fundamentally, as supply in Yunnan increased rapidly, aluminium supply pressure may gradually emerge. Due to floods and other factors in the north during the week, fewer aluminium ingot arrivals were reported, and aluminium social stocks shrank. Orders in some downstream sectors improved, but was not insufficient to boost aluminium consumption significantly. In the short term, low aluminium ingot social inventory may give a bottom support for aluminium prices, but the positive macro sentiment has faded. A possible fall in aluminium prices may be felt from supply increase and demand sluggishness. It is expected that the most-traded SHFE aluminium contract will fluctuate at 18,000-18,700 yuan/mt in the week ending August 11, while LME aluminium will run at $2,180-2,270/mt. Changes on consumption and inventory will deserve to be monitored.

Lead

LME lead prices closed at $2125/mt last Friday evening, down 0.7%.

The most active SHFE 2309 lead contract prices closed at 15,870 yuan/mt, an increase of 0.5%. Open interest stood at 105,000 lots, a decrease of 1,584 lots from the previous trading day.

Zinc

LME zinc prices closed up $0.5/mt or 0.02% at $2,505.5/mt last Friday evening. The trading volume decreased to 7,003 lots, and open interest added 798 lots to 201,000 lots. LME zinc inventory shed by 3,025 mt to 94,900 mt.

The most active SHFE 2309 zinc contract prices closed at 21,050 yuan/mt, up 80 yuan/mt or 0.38%. Trading volume fell to 66,051 lots, and open interest decreased by 46 lots to 107,000 lots.

Tin

On Friday night, SHFE 2309 tin contract price fell sharply after the opening. After reaching a low price of around 224,800 yuan/mt, it gradually rose and finally closed at 226,750 yuan/mt, down 1.2%.

Nickel

SHFE nickel experienced a volatile movement last week, declining by 0.29% WoW. On the macro level, the focus continued on policies following the political bureau meeting. Stimulus measures for consumption and policies supporting real estate and automotive industries were introduced, including the removal of purchase restrictions in certain second and third-tier cities and relaxing housing provident fund policies. These policies initially boosted SHFE nickel until last Wednesday night. On last Thursday, influenced by limited support from the pure nickel fundamentals, the price dropped to 167,580 yuan/mt. However, it rebounded to 169,970 yuan/mt on last Friday morning due to remarks from the National Development and Reform Commission emphasizing consumer promotion. Regarding fundamentals, a domestic refined nickel producer is planning equipment maintenance in August, but it is not expected to impact overall supply. Additionally, an overseas pure nickel project is set to begin production in mid-August, with a planned capacity of 50,000 mt/year. Initial production is estimated at 500-1000 mt/month, gradually increasing throughout the year. In terms of demand, military orders in the alloy sector remained steady, while civilian orders were somewhat restrained by rising raw material prices. Orders decreased in July, and alloy enterprises are generally cautious about civilian order expectations for August. In the electroplating industry, weak downstream demand and high raw material prices have led to continued reduction in pure nickel consumption throughout July. As July and August are the off-season for the electroplating industry, it's anticipated that nickel consumption will remain weak in August due to higher temperatures and sustained weak downstream demand. In summary, current nickel prices are primarily influenced by macro factors. With limited fundamental support, it's expected that nickel prices will continue to experience a volatile movement this week.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
9 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
9 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
9 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
9 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
11 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
11 jam yang lalu