China Weekly Inventory Summary and Data Wrap (May 12)

Telah Terbit: May 12, 2023 18:30
Sumber: SMM
This is a roundup of China's metals weekly inventory as of May 12.

SHANGHAI, May 12 (SMM) - This is a roundup of China's metals weekly inventory as of May 12.

Weekly Updates on China Aluminium Ingot and Billet Inventory as of May 11

Aluminium ingot: The aluminium ingot social inventories across China’s eight major markets stood at 787,000 mt as of May 11, down 48,000 mt from a week ago and 216,000 mt from the same period last year. The current inventory is the lowest level compared with the same period of the past five years, and the destocking speed is still relatively fast. Most regions experienced inventory reductions. Stocks in south China began to fall in the second half of the week as the impact of concentrated cargoes arrivals has faded and withdrawals from warehouses picked up after premiums fell back. Cargo arrivals in Wuxi have been relatively small, allowing local stocks to decline, and this situation is expected to last for the foreseeable future. Cargo arrivals in Gongyi were relatively stable, but downstream purchases were sluggish, thus local stocks fell only slightly.  Judging from the ingots in transit and smelters’ product portfolio, aluminium ingot inventory is expected to remain at a low level in the near future. That being said, aluminium ingot inventory will present less significance for reference as the proportion of non-ingot output at smelters is on the rise. 
Aluminium billet: The domestic aluminium billet social inventory stood at 168,600 mt as of May 11, up 10,900 mt from a week ago. Continuous cargo arrivals and poor downstream consumption contributed to inventory accumulation. An increasing share of molten aluminium has been made into billets and other intermediate products. Meanwhile, aluminium extrusion industry is gradually entering the off-season. Therefore, aluminium billet inventory will face great risks of building up. 

Pure Nickel Bonded Zone Inventory Stands Flat from May 5

As of May 12, bonded zone inventory of nickel stood flat WoW at 4,300 mt. The inventory of nickel briquettes was 1,370 mt, and that of nickel plates was 2,930 mt. The import window remained closed amid the decline in the SHFE/LME nickel price ratio, which cast no influence on imports of nickel plates under long-term contracts priced in RMB. And some spot pure nickel still flowed into the Chinese market.

Zinc Ingot Social Inventory Down 1,800 mt from this Monday

SMM data shows that social inventories of zinc ingots across seven major markets in China totalled 124,100 mt as of May 12, down 1,800 mt from May 8 and up 6,100 mt compared with the prior week. In Shanghai, the downstream buyers were cautious about purchasing against high zinc prices, when zinc ingots of some foreign brands arrived at the market. As a result, the inventory in Shanghai climbed further. In Guangdong, the market arrivals rose but the downstream purchases also improved approaching the weekend, allowing local inventory to dip slightly. In Tianjin, low market arrivals and growing transactions amid a decline in zinc prices together contributed to a drop in the inventory in Tianjin. Overall, the total inventory in Shanghai, Guangdong and Tianjin lost 1,800 mt, and that across seven major markets in China rose 6,100 mt.

Nickel Ore Inventories at Chinese Ports down 243,000 wmt WoW

As of May 12, the nickel ore inventories at Chinese ports dropped 243,000 wmt from a week earlier to 6.36 million wmt. The total Ni content stood at 50,000 mt. The port inventory of nickel ore across seven major Chinese ports stood at 3.18 million wmt, down 133,000 wmt WoW. Nickel ore prices rose slightly during the week. The buyers resumed their rigid-demand purchases this week, but the mines intended to quote higher. Mines in the Philippines will ship spot ore gradually in May despite the poor weather conditions in the country. Therefore, the port inventory may maintain an upward track in the near future.

Silicon metal social inventory increased as producers in Yunnan shipped cargoes to social warehouses in Kunming

 Social inventories of silicon metal in China’s three major regions totalled 160,000 mt as of May 12, up 3,000 mt from a week ago. During the week, silicon metal prices fell amid market panic. However, transactions were muted. Cargo inflows and outflows in warehouses at Tianjin Port and Huangpu Port were limited, leaving local stocks little changed. Stocks in Kunming rose mainly because silicon metal plants shipped cargoes to social warehouses in the region, with 421# silicon metal recording the biggest inventory growth. Total silicon metal social inventories remained high.

Copper inventories in the domestic bonded zones fell this week

As of Friday May 12, copper inventories in the domestic bonded zones decreased 9,300 mt from May 5 to 150,000 mt, according to the latest SMM survey.

Inventories in the Guangdong bonded zone added 1,000 mt to 17,000 mt, while inventories in the Shanghai bonded zone dropped 10,300 mt to 133,000 mt.

Recently, the import losses shrank and turned into profits, incentivising sellers to sell cargoes. Shipments under warrants thus increased. Arriving shipments under bill of lading grew this week but mostly went directly to downstream companies, limiting shipments arrivals in the bonded zones.

Next week, arriving shipments under bill of lading will fall. Bonded zone inventories are expected to drop further given narrower import losses.


Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
11 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
11 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
11 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
11 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
13 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
13 jam yang lalu