When Will SiMn Alloy and Manganese Ore Prices Pivot after Falling throughout July?

Telah Terbit: Aug 03, 2022 14:53 (GMT+8)
If the steel mills’ purchases fall short, the restored profits of alloy factories will be engulfed by the steel mills again. And alloy factories will maintain production cuts by then, resulting in a stalemate in the SiMn alloy market.

SHANGHAI, Aug 3 (SMM) - The manganese ore prices fluctuated downwards in July, and the SiMn alloy prices were also affected by the decline in raw material prices and the weak demand. How will the market perform in August? SMM will analyse the SiMn alloy and manganese ore price moves from both the supply and demand.

Manganese ore

From the perspective of supply: the manganese ore inventory rose as a whole in July, an increase of 507,000 mt month-on-month. The main reason is that the Gabon ore arrived at ports in large amounts, while downstream alloy factories were more cautious in purchasing, hence the overall inventory accumulated. 

On the demand side: the spot prices of manganese alloy were dragged on by poor demand from steel mills as they have not yet shown signs of recovery, resulting in less demand for alloy, and manganese ore subsequently. In addition, as manganese ore prices kept falling in July, downstream alloy factories kept only 1-2 days of raw materials in order not to stock high-priced raw materials, despite risks of raw material shortage. 

In terms of prices: the ore prices have been falling continuously throughout July, and the originally resilient Australia lump prices dropped as well. The monthly average price of Australia lump remained at 57 yuan/mtu, down 8% MoM; Gabon ore 54 yuan/mtu, down 7% MoM; and South Africa semi-carbonate ore 39 yuan/mtu, a MoM increase of 9%. Due to the continuous arrival of Australia lump at ports and the long-term reduction in the proportion of Australia lump used by alloy factories, the prices were under pressure amid rising inventory. Two large ships carrying Gabon ore also arrived in China in July, shoring up the supply. And the ore prices fell when the alloy factory were cautious in purchasing.

For the market outlook, SMM believes that the ore prices may drop slightly first and then stop falling. First of all, the miners are in seriously losses, and are less willing to lower the prices further after selling with low prices throughout July. Another drop of 1-2 yuan/mt can be expected, and then the wrestling between different forces will intensify. On the other hand, with the sharp drop in raw material prices, the profits of downstream manganese alloys have been restored. Some factories that are still profitable may resume the production, and the demand for manganese ore will pick up slightly.

SiMn alloy

In terms of raw materials: coke prices continued to decline in July. As of the end of the month, the prices of secondary metallurgical coke remained at around 2,000 yuan/mt, which means that there is room for a decrease of 500 yuan/mt concerning SiMn alloy cost. In addition, manganese ore prices fell as well, reducing the cost of SiMn alloy.

On the demand side: Affected by the sluggish terminal consumption, downstream steel mills were slow in resuming the production, resulting in poor SiMn alloy demand, with some alloy sold below 7,000 yuan/mt. In this case, a number of high-cost alloy factories reduced or stopped the production, especially in south China. 

In terms of prices: the prices of SiMn alloy dropped in July, so was the futures. In the spot market, as of the end of the month, the price difference between the north and south markets was narrow, which mostly stood at 7,100-7,200 yuan/mt (in cash, ex-factory). The alloy factories, on the other hand, reduced the production to the level enough to supply the orders on hand, and the spot transactions were limited. Affected by the falling futures prices, the discounts were below 7,000 yuan/mt over the futures prices, and the factories were generally pessimistic.

In the future, SMM believes that the situation of weak market consumption will extend. The season is that the steel mills resume the production more slowly than expected, and the market shall watch the purchases of SiMn alloy by the mills in August. If the steel mills’ purchases fall short, the restored profits of alloy factories will be engulfed by the steel mills again. And alloy factories will maintain production cuts by then, resulting in a stalemate in the SiMn alloy market.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
【Kilat | Regulator Perintahkan Penutupan Sebagian El Teniente; Dampak Molibdenum Masih Belum Dikonfirmasi】
13 jam yang lalu
【Kilat | Regulator Perintahkan Penutupan Sebagian El Teniente; Dampak Molibdenum Masih Belum Dikonfirmasi】
Baca Selengkapnya
【Kilat | Regulator Perintahkan Penutupan Sebagian El Teniente; Dampak Molibdenum Masih Belum Dikonfirmasi】
【Kilat | Regulator Perintahkan Penutupan Sebagian El Teniente; Dampak Molibdenum Masih Belum Dikonfirmasi】
Badan Geologi dan Pertambangan Nasional Chile memerintahkan penghentian sementara pada 13 Oktober di tempat pembuangan limbah Kawah Utara El Teniente dan area lain yang terpapar risiko longsor atau pergerakan tanah, sambil menyatakan bahwa perintah tersebut tidak menangguhkan seluruh divisi. Amerigo Resources secara terpisah menyatakan operasi tailing Minera Valle Central-nya tidak terpengaruh. El Teniente memproduksi 1.483,1 ton metrik molibdenum terkandung pada paruh pertama 2026, turun 34,9% dari tahun sebelumnya. Tidak ada gangguan pada penambangan bawah tanah, konsentrator, atau sirkuit pemulihan molibdenum yang telah dikonfirmasi; SMM tidak merevisi perkiraannya.
13 jam yang lalu
[SMM Kilasan Kromium] Harga Rata-rata Krom Tharisa Turun Menjadi $285/ton pada Kuartal IV, Proyeksi Tahun Fiskal 2027 Tetap 1,50-1,65 Juta Ton
13 jam yang lalu
[SMM Kilasan Kromium] Harga Rata-rata Krom Tharisa Turun Menjadi $285/ton pada Kuartal IV, Proyeksi Tahun Fiskal 2027 Tetap 1,50-1,65 Juta Ton
Baca Selengkapnya
[SMM Kilasan Kromium] Harga Rata-rata Krom Tharisa Turun Menjadi $285/ton pada Kuartal IV, Proyeksi Tahun Fiskal 2027 Tetap 1,50-1,65 Juta Ton
[SMM Kilasan Kromium] Harga Rata-rata Krom Tharisa Turun Menjadi $285/ton pada Kuartal IV, Proyeksi Tahun Fiskal 2027 Tetap 1,50-1,65 Juta Ton
Tharisa melaporkan harga rata-rata konsentrat krom mutu metalurgi sebesar US$285/t pada basis 42% pada kuartal keempat tahun fiskal 2026, turun 6,9% dari US$306/t pada kuartal ketiga. Rata-rata FY2026 adalah US$290/t, naik 9,0% dari US$266/t pada FY2025. CEO Phoevos Pouroulis mengatakan lingkungan harga secara material lebih kuat dibandingkan tahun sebelumnya. Keranjang PGM bergerak ke arah yang sama. Harga rata-rata keranjang logam terkandung PGM adalah US$2.535/oz pada kuartal keempat, turun 5,4% dari US$2.681/oz pada kuartal ketiga. Rata-rata FY2026 adalah US$2.607/oz, dibandingkan US$1.615/oz pada FY2025. Untuk FY2027, Tharisa memandu produksi konsentrat krom sebesar 1,50-1,65 Mt dan produksi PGM sebesar 150.000-170.000 oz pada basis 6E, yang mencerminkan produksi dari Tambang Tharisa saja. Rentang krom tidak berubah dari panduan FY2026, dan output FY2026 sebesar 1,56 Mt berada dalam rentang tersebut.
13 jam yang lalu
[SMM Kilasan Kromium] Produksi Konsentrat Krom Tharisa FY2026 Mencapai 1,56 Juta Ton, Sesuai Panduan
13 jam yang lalu
[SMM Kilasan Kromium] Produksi Konsentrat Krom Tharisa FY2026 Mencapai 1,56 Juta Ton, Sesuai Panduan
Baca Selengkapnya
[SMM Kilasan Kromium] Produksi Konsentrat Krom Tharisa FY2026 Mencapai 1,56 Juta Ton, Sesuai Panduan
[SMM Kilasan Kromium] Produksi Konsentrat Krom Tharisa FY2026 Mencapai 1,56 Juta Ton, Sesuai Panduan
Tharisa memproduksi 416.700 ton konsentrat krom pada kuartal keempat tahun fiskal 2026 (Juli–September), naik 5,8% secara kuartalan dari 393.800 ton pada kuartal ketiga. Produksi kuartal tersebut terdiri dari 371.300 ton kadar metalurgi dan 45.400 ton kadar khusus. Produksi sepanjang tahun fiskal 2026 mencapai 1.563.800 ton, sedikit di atas 1.558.200 ton yang diproduksi pada tahun fiskal 2025 dan sejalan dengan panduan perusahaan. Peningkatan throughput mendukung kenaikan kuartalan. Di Tambang Tharisa di Afrika Selatan, reef yang ditambang naik 8,5% secara kuartalan menjadi 1,34 juta ton, sementara reef yang digiling naik 7,3% menjadi 1,43 juta ton. Produksi PGM perusahaan naik seiring dengan krom, dengan produksi kuartalan sebesar 41.000 ons berdasarkan basis 6E, sehingga total tahun fiskal 2026 mencapai 153.700 ons. CEO Tharisa Phoevos Pouroulis mengatakan grup tersebut memenuhi panduan pasarnya untuk kedua komoditas pada tahun fiskal 2026, menggambarkannya sebagai tahun di mana pertumbuhan perusahaan bergerak dari perencanaan ke konstruksi.
13 jam yang lalu