Zinc Prices Likely to Rebound in May though with Limited Upside Momentum

Telah Terbit: May 17, 2022 14:18 (GMT+8)
Sumber: SMM
However, the current fundamentals remain strong, as LME inventory is still falling, and the European premiums kept rising in early May and remain at around $500/mt for the moment. On the whole, zinc prices still gain support from the fundamentals.

SHANGHAI, May 17 (SMM) - The US Fed decided to raise the interest rate by 50 basis points at its May monetary policy. At the same time, it will officially start to shrink the balance sheet from June 1, which also means that the Fed's monetary policy has been fully tightened. Since the end of the meeting, non-ferrous metals prices have fallen rapidly from high, which is also due to the fact that the market transaction logic has shifted from tight supply to gloomy expectations of future economy and consumption. On the contradiction between strong fundamentals and shadowed macro expectation, the price volatility has been wild, and the risk of zinc price transactions has also been exacerbated. SMM will discuss zinc prices from both overseas and domestic perspectives.

In the overseas market, macro-level concerns dominated the market, and the sudden drop in overseas sentiment pulled down the zinc price from $4,000/mt to $3,600/mt. On the supply side, the old problems still existed, and the electricity price in Europe was high, sustaining the smelting cost at a high level. With the decline in zinc prices, European smelters suffered losses, and it is difficult to see smelters resuming the production from previous production suspension or reduction. As such, the supply remained tight. On the consumption side, LME inventory has dropped more slowly compared to April. Meanwhile, China's exported zinc ingots also began to be delivered to LME warehouses, and then LME cash-to-three-month backwardation narrowed, weakening market confidence on consumption. However, the current fundamentals remain strong, as LME inventory is still falling, and the European premiums kept rising in early May and remain at around $500/mt for the moment. On the whole, zinc prices still gain support from the fundamentals. However, under the circumstance that the market focus has changed, there is no further stimulus overseas. It is expected that LME Zinc prices will rebound, but are unlikely to return to the previous high.

In China, several factors are worth attention. 1. Ore supply was still in shortage. The average TC of zinc ore has dropped to 3,500 yuan/mt, while the TC in Yunnan has fallen to 3,300 yuan/mt, which has also raised the production cost of smelters. The cost support will be tested. 2. The recently rising SHFE/LME price ratio has led to the complete closure of the export window. Reverse arbitrage holders that plan to export before could pay off by closing the positions, so these zinc ingots may become visible inventory. As such, the market needs to pay attention to changes in domestic inventories. According to market sources, most of the zinc ingots have been set for ships and overseas warrants, and the export plan remains unchanged. 3. The rising price ratio, on the other hand, opens the import window on the mine end. Although the recent shortage of ores cannot be fully resolved, some smelters have already started to restock for the third quarter, which also means that the domestic zinc ingot output in the second half of the year will increase. 4. Only when the pandemic situation fully recovers can we expect the recovery of consumption and the introduction of consumption-oriented supporting policies. On the whole, strong driving forces are required to trigger further zinc price moves. Before that, there is an opportunity for zinc to rebound, but the strength will not be very strong.

Risks: overseas energy, LME inventory that begins to accumulate continuously, European smelters’ production resumption, domestic pandemic

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Tambang Vareš DPM Menargetkan Hasil Produksi 850.000 Ton per Tahun
40 menit yang lalu
Tambang Vareš DPM Menargetkan Hasil Produksi 850.000 Ton per Tahun
Baca Selengkapnya
Tambang Vareš DPM Menargetkan Hasil Produksi 850.000 Ton per Tahun
Tambang Vareš DPM Menargetkan Hasil Produksi 850.000 Ton per Tahun
DPM Metals Inc. merilis hasil produksi awal kuartal ketiga 2026. Tambang polimetalik Vareš miliknya di Bosnia dan Herzegovina memproses sekitar 143.000 ton bijih, menghasilkan konsentrat yang mengandung sekitar 28 juta pon seng dan 17 juta pon timbal. Logam terbayar dalam konsentrat yang terjual selama kuartal tersebut berjumlah sekitar 16 juta pon seng dan 12 juta pon timbal. Selama sembilan bulan pertama 2026, Vareš memproduksi konsentrat yang mengandung sekitar 52 juta pon seng dan 35 juta pon timbal. DPM menyatakan produksi komersial di Vareš, sementara operasi terus ditingkatkan menuju laju produksi tahunan sebesar 850.000 ton per tahun pada akhir 2026. Pembangunan pabrik penyaring tailing kedua dan pabrik backfill pasta hampir selesai, dengan commissioning diharapkan dimulai masing-masing pada bulan November dan Desember.
40 menit yang lalu
【SMM Berita Kilat】GoldHaven Mulai Pengeboran di Target Perak-Timbal-Seng Zona D Setelah Menyelesaikan 1.729 Meter di Kuhn
1 jam yang lalu
【SMM Berita Kilat】GoldHaven Mulai Pengeboran di Target Perak-Timbal-Seng Zona D Setelah Menyelesaikan 1.729 Meter di Kuhn
Baca Selengkapnya
【SMM Berita Kilat】GoldHaven Mulai Pengeboran di Target Perak-Timbal-Seng Zona D Setelah Menyelesaikan 1.729 Meter di Kuhn
【SMM Berita Kilat】GoldHaven Mulai Pengeboran di Target Perak-Timbal-Seng Zona D Setelah Menyelesaikan 1.729 Meter di Kuhn
GoldHaven Resources Corp. mengumumkan selesainya program pengeboran 2026 di target tungsten-skarn Kuhn dalam Proyek Magno di British Columbia, Kanada. Program ini terdiri dari delapan lubang bor dengan total 1.729 meter. Lubang bor GOH26-08 memotong mineralisasi skarn di kedalaman sekitar 80 meter di sepanjang jurus dari zona skarn bawah yang sebelumnya ditemukan di GOH26-04. Perusahaan menyatakan bahwa pengeboran lebih lanjut dan uji laboratorium diperlukan untuk menetapkan kontinuitas dan kadar mineralisasi. Setelah selesainya program Kuhn, GoldHaven telah memobilisasi rig bornya ke target perak-timbal-seng Zona D, di mana pengeboran kini sedang berlangsung. Zona D terletak di dalam Proyek Magno yang lebih luas dan mengandung mineralisasi polimetalik pada batuan karbonat Grup Atan Kambrium Bawah, termasuk galena, sfalerit, dan sulfida masif setempat. Program saat ini dirancang untuk menguji geometri dan potensi perluasan mineralisasi perak-timbal-seng yang telah teridentifikasi secara historis.
1 jam yang lalu
【SMM Berita Kilat】Metalsource Mulai Pengeboran Tahap 2 di Silver Hill, Menargetkan Area 1,12 Kilometer ke Utara.
1 jam yang lalu
【SMM Berita Kilat】Metalsource Mulai Pengeboran Tahap 2 di Silver Hill, Menargetkan Area 1,12 Kilometer ke Utara.
Baca Selengkapnya
【SMM Berita Kilat】Metalsource Mulai Pengeboran Tahap 2 di Silver Hill, Menargetkan Area 1,12 Kilometer ke Utara.
【SMM Berita Kilat】Metalsource Mulai Pengeboran Tahap 2 di Silver Hill, Menargetkan Area 1,12 Kilometer ke Utara.
Metalsource Mining mengumumkan pengeboran eksplorasi Tahap 2 di Silver Hill, Carolina Utara, yang menargetkan anomali IP sekitar 1.120 meter di utara mineralisasi yang diketahui. Rig kedua dan shift malam telah ditambahkan untuk mendukung perluasan di dekat tambang dan pengujian lebih jauh. SH26-34 secara visual memotong sekitar 20 meter mineralisasi dalam inti bor, dengan hasil pengujian masih tertunda. Mineralisasi emas-perak-timbal-seng juga telah diidentifikasi di subkrop 240 meter ke arah timur laut.
1 jam yang lalu