Restoration of MFN tariff on solid waste imports to have little impact on aluminium industry

Telah Terbit: Jan 04, 2021 16:30 (GMT+8)
The Office of the Customs Tariff Commission of the State Council issued an announcement to make appropriate adjustments to the provisional import tax rate implemented in 2020.

SHANGHAI, Jan 4 (SMM) — The Office of the Customs Tariff Commission of the State Council issued an announcement to make appropriate adjustments to the provisional import tax rate implemented in 2020. In order to implement the "Law on the Prevention and Control of Environmental Pollution by Solid Wastes", starting from January 1, 2021, the provisional tax rate for the import of solid wastes such as shredded metal scrap will be cancelled, and the most-favored-nation (MFN) tax rate will be restored.

According to the "Import and Export Tariffs of the People's Republic of China (2021)", the order of application of tax rates is as follows:

When the MNF tax rate is lower than or equal to the agreed tax rate, if the agreement has provisions, it shall be implemented in accordance with the relevant agreement, but if the agreement has no provisions, the lower tax rate of the two shall apply. If imported goods that are applicable to the MFN tax rate have provisional tax rate, the provisional tax rate shall be applied; if imported goods that are applicable to the agreed tax rate and preferential tax rate have provisional tax rate, the lower tax rate of the three shall be applied; if imported goods are applicable to general tax rate, the provisional tax rate shall not apply. 

Previously, except for US shredded aluminium scrap, whose agreed tax rate increased to 50%, the provisional tariffs and MFN tariff on shredded aluminium scrap from other countries were zero and 1.5% respectively, and zero tariff was applied. Under the new tariff, the provisional tariff on traditional shredded aluminium scrap has been cancelled, and the MFN tariff of 1.5% has been restored. However, for the newly added raw material "recycled casting aluminium alloy raw materials", the MFN import tariff is tentatively set at zero. It should be noted that the import of other shredded aluminium scrap under the tariff code 7602.0000 will be banned from January 1, 2021, thus the tariff adjustment from 0 to 1.5% will have no actual impact. The new tariff code still implements the MFN tariff that is tentatively set at zero. Therefore, SMM believes that the restoration of MFN tariffs on solid waste imports will have no actual impact on the aluminium industry. Market still needs to pay attention to the implementation of imports of renewable casting aluminium alloy raw materials.

For more information on the silicon metal and aluminium markets, please subscribe to China Aluminium Weekly.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Aluminum Alloy Prices Slip, Futures and Spot Markets Show Weakness
1 menit yang lalu
Aluminum Alloy Prices Slip, Futures and Spot Markets Show Weakness
Baca Selengkapnya
Aluminum Alloy Prices Slip, Futures and Spot Markets Show Weakness
Aluminum Alloy Prices Slip, Futures and Spot Markets Show Weakness
[SMM Aluminum Alloy Daily Review] Futures: The most-traded AD2701 cast aluminum alloy contract opened at 22,870 yuan/mt today, with the opening price marking the day's high. It then drifted lower, closing at 22,645 yuan/mt in the morning session, down 95 yuan/mt or 0.42% from yesterday's settlement price. Spot: The ADC12 market showed overall weakness today. Wait-and-see sentiment remains strong in the ADC12 market, and it is expected to consolidate on a subdued note within a narrow range in the short term. Attention should be paid to aluminum price trends and actual downstream purchasing.
1 menit yang lalu
Longding Aluminum Cetak Rekor Produksi Aluminium Foil Baterai 1.075 mt, Perluas Kapasitas dengan Proyek Tahap II
21 menit yang lalu
Longding Aluminum Cetak Rekor Produksi Aluminium Foil Baterai 1.075 mt, Perluas Kapasitas dengan Proyek Tahap II
Baca Selengkapnya
Longding Aluminum Cetak Rekor Produksi Aluminium Foil Baterai 1.075 mt, Perluas Kapasitas dengan Proyek Tahap II
Longding Aluminum Cetak Rekor Produksi Aluminium Foil Baterai 1.075 mt, Perluas Kapasitas dengan Proyek Tahap II
Pada bulan Oktober, produksi aluminium foil baterai Longding Aluminum Enterprise untuk pertama kalinya melampaui angka 1.000 ton, mencapai 1.075 ton, sebuah rekor tertinggi. Sejak resmi memasuki pasar aluminium foil baterai, perusahaan telah mendirikan pabrik cabang aluminium foil baterai dan pabrik cabang pemotongan presisi untuk membentuk koordinasi hulu-hilir yang efektif. Hanya dalam empat bulan, produk aluminium foil baterai berhasil dikembangkan dari nol hingga volume besar, dengan produksi yang tumbuh berlipat ganda selama beberapa bulan berturut-turut. Produksi bulanan dengan cepat melampaui angka 1.000 ton, dan laju peningkatan kapasitas berjalan konsisten serta terkendali, meletakkan dasar yang kokoh untuk perluasan produksi dan pengembangan pasar. Untuk terus memperkuat dan memperluas industri aluminium foil baterai, Longding Aluminum Enterprise mempercepat pembangunan proyek aluminium foil baterai Tahap II berkapasitas 100.000 ton. Di antaranya, empat lini pengecoran dan penggulungan aluminium foil baterai baru berhasil dioperasikan pada bulan Oktober dan dengan cepat mencapai produksi stabil bahan baku aluminium foil baterai; pembangunan enam unit penggulung aluminium foil khusus baterai baru beserta fasilitas pendukungnya berjalan dengan tertib. Setelah proyek selesai, kapasitas aluminium foil baterai perusahaan akan melampaui 8.000 ton per bulan, memasuki jajaran teratas industri aluminium foil baterai Tiongkok dan menyuntikkan momentum kuat bagi peningkatan kualitas, transformasi dan peningkatan, serta pengembangan berkualitas tinggi perusahaan.
21 menit yang lalu
Qinghai Mingrui Aluminum Perluas Produksi, Capai Kapasitas 35.000 mt dan Nilai Output 810 Juta Yuan
26 menit yang lalu
Qinghai Mingrui Aluminum Perluas Produksi, Capai Kapasitas 35.000 mt dan Nilai Output 810 Juta Yuan
Baca Selengkapnya
Qinghai Mingrui Aluminum Perluas Produksi, Capai Kapasitas 35.000 mt dan Nilai Output 810 Juta Yuan
Qinghai Mingrui Aluminum Perluas Produksi, Capai Kapasitas 35.000 mt dan Nilai Output 810 Juta Yuan
Qinghai Mingrui Aluminum Co., Ltd. telah merencanakan total 11 lini produksi. Seluruh mesin kini telah terpasang, dan bahan baku diperoleh secara lokal dari aluminium cair Qinghai West Hydropower Co., Ltd. Pada bulan Februari tahun ini, perusahaan memulai produksi percobaan, dan pada bulan Maret dua lini produksi mulai beroperasi, dengan kapasitas bulanan 2.000 ton. Pada bulan April, empat lini produksi tambahan mulai beroperasi, meningkatkan kapasitas bulanan menjadi 4.600 ton. Setelah lini produksi No. 5 dan No. 6 dioperasikan, produksi harian meningkat dari 160 ton menjadi 220–240 ton. Hingga bulan Oktober, kapasitas kumulatif perusahaan mencapai 35.000 ton, dengan nilai produksi 810 juta yuan.
26 menit yang lalu