Ministry of Industry and Information Technology: the draft of the Standard for four-wheeled low-speed Electric vehicles has been completed.

Telah Terbit: Sep 21, 2020 10:09 (GMT+8)

SMM: on September 18, the Ministry of Industry and Information Technology issued the reply to recommendation No. 7609 of the third session of the 13th National people's Congress, saying that the draft standard of "Technical conditions for four-wheeled low-speed electric vehicles" was approved by the administrative department in charge of standardization under the State Council in September 2019, and is currently speeding up the preparation of the standard.

Photo source: screenshot of the official website of the Ministry of Industry and Information Technology

The Ministry of Industry and Information Technology pointed out that most low-speed electric vehicle manufacturing enterprises do not have the qualification for motor vehicle production, and their products do not meet the requirements of national standards, and most of them are illegally produced, sold and used on the road in the name of "walking vehicles for the elderly." However, due to its low purchase price, low use cost and other reasons, to a certain extent, it meets the domestic demand for short-distance travel in cities or rural areas below the third and fourth lines, and has developed in some areas in recent years.

According to the Ministry of Industry and Information Technology, in order to further strengthen the management of four-wheel low-speed electric vehicles, with the approval of the State Council, six departments, including the Ministry of Industry and Information Technology, the Development and Reform Commission, the Ministry of Science and Technology, the Ministry of Public Security, the Ministry of Transport, and the General Administration of Market Supervision, jointly issued the Circular on strengthening the Management of low-speed Electric vehicles in November 2018, requiring the local people's governments of all provinces, autonomous regions and municipalities directly under the Central Government to organize the clean-up and rectification of low-speed electric vehicles. It is strictly forbidden to increase the production capacity of low-speed electric vehicles, speed up the standardized management of low-speed electric vehicles, and establish a long-term supervision mechanism.

Since the release of the Circular, Shandong, Jiangsu, Henan, Hebei and other key areas have organized and carried out a survey, clean-up and rectification of low-speed electric vehicle production and sales enterprises, successively established a working mechanism, organized and carried out relevant governance work, and standardized the development of low-speed electric vehicle industry, and achieved certain results.

With regard to the standard for four-wheel low-speed electric vehicles, the Ministry of Industry and Information Technology said that the Ministry of Industry and Information Technology has organized industry experts and key enterprises to carry out many discussions, and all parties have reached a consensus that "micro, short-distance, low-speed, use in specific areas, safety and environmental protection requirements will not be reduced." the draft standard for "Technical conditions for four-wheeled low-speed electric vehicles" was approved by the administrative department in charge of standardization under the State Council in September 2019. At present, the preparation of standards is being accelerated.

In the next step, the Ministry of Industry and Information Technology, together with relevant departments, will continue to solidly promote the management of low-speed electric vehicles and speed up the formulation of standards for low-speed electric vehicles. we will further improve the specific management measures for the production, sales, taxes and fees, insurance and use management, and after-sales service of low-speed electric vehicles, and improve the management system of low-speed electric vehicles.

2020 Zinc Die casting Industry Summit Forum

Scan the code to participate in the meeting or apply to join the SMM Die casting Zinc Industry Exchange Group

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
SHFE seng terus menurun, diperkirakan tetap lemah dalam jangka pendek [ulasan futures seng SMM]
13 jam yang lalu
SHFE seng terus menurun, diperkirakan tetap lemah dalam jangka pendek [ulasan futures seng SMM]
Baca Selengkapnya
SHFE seng terus menurun, diperkirakan tetap lemah dalam jangka pendek [ulasan futures seng SMM]
SHFE seng terus menurun, diperkirakan tetap lemah dalam jangka pendek [ulasan futures seng SMM]
[SHFE Seng Terus Melemah, Diperkirakan Tetap Lemah dalam Jangka Pendek] Kontrak SHFE seng 2612 yang paling aktif dibuka pada 25.550 yuan/mt. Setelah pembukaan, SHFE seng terkonsolidasi di level rendah, mencapai tertinggi intraday 25.570 yuan/mt dan terendah 25.415 yuan/mt mendekati penutupan, sebelum ditutup melemah di 25.425 yuan/mt, turun 155 yuan/mt, atau 0,61%. Volume perdagangan meningkat menjadi 58.400 lot, dan open interest naik 1.556 lot menjadi 102.000 lot.
13 jam yang lalu
Data: Pergerakan pasar SHFE, DCE (15 Okt)
14 jam yang lalu
Data: Pergerakan pasar SHFE, DCE (15 Okt)
Baca Selengkapnya
Data: Pergerakan pasar SHFE, DCE (15 Okt)
Data: Pergerakan pasar SHFE, DCE (15 Okt)
Tabel berikut menunjukkan pergerakan logam besi dan nonbesi di SHFE dan DCE pada 15 Okt 2026
14 jam yang lalu
【Flash | TOP Nanometal Hentikan Produksi Film Indium Tin Oxide dan Alihkan Peralatan ke Tembaga Sputtered】
14 jam yang lalu
【Flash | TOP Nanometal Hentikan Produksi Film Indium Tin Oxide dan Alihkan Peralatan ke Tembaga Sputtered】
Baca Selengkapnya
【Flash | TOP Nanometal Hentikan Produksi Film Indium Tin Oxide dan Alihkan Peralatan ke Tembaga Sputtered】
【Flash | TOP Nanometal Hentikan Produksi Film Indium Tin Oxide dan Alihkan Peralatan ke Tembaga Sputtered】
TOP Nanometal Corporation, produsen sputtering vakum roll-to-roll asal Taiwan, telah menghentikan produksi film konduktif transparan Indium Tin Oxide dengan segera. Perusahaan akan mengalihkan seluruh peralatan Indium Tin Oxide sebelumnya ke produksi tembaga sputtering kelas atas, dengan fokus pada Flexible Copper Clad Laminate bebas perekat, film poliester berlapis tembaga untuk layar dioda pemancar cahaya transparan, dan film tembaga tipis untuk elektroda fleksibel. TOP Nanometal mengaitkan keputusan ini dengan persaingan yang semakin ketat dan margin keuntungan yang menyempit di pasar film Indium Tin Oxide, sementara permintaan pelanggan dan profitabilitas lebih kuat pada produk tembaga sputtering. SMM meyakini penutupan ini menunjukkan bahwa film Indium Tin Oxide konvensional menghadapi persaingan biaya dan profitabilitas yang semakin besar dari bahan konduktif berbasis tembaga dalam aplikasi elektronik fleksibel dan layar transparan tertentu. Konversi ini akan mengurangi permintaan perusahaan terhadap target Indium Tin Oxide dan bahan baku indium, meskipun kapasitas film, output, pembelian target, dan konsumsi indium sebelumnya tidak diungkapkan.
14 jam yang lalu