[SMM analysis] the operating rate of aluminum sheet and strip increased significantly in March compared with the previous month, and fell back in April into an established fact.

Telah Terbit: Apr 13, 2020 19:01 (GMT+8)
SMM conducted a survey of the aluminum plate and strip market in March and learned that the average weighted operating rate of China's aluminum plate and strip industry was 62.25% in March, up 13 percentage points from the previous month, down more than 10 percentage points from the same period last year, and is expected to fall slightly to 61 per cent in April 2020.

SMM conducted a survey of the aluminum plate and strip market in March and learned that the average weighted operating rate of China's aluminum plate and strip industry was 62.25% in March, up 13 percentage points from the previous month, down more than 10 percentage points from the same period last year, and is expected to fall slightly to 61 per cent in April 2020.

Source: SMM

At the beginning of March, most of the production conditions of plate and strip enterprises in the industry returned to normal, and some enterprises were still in a state of semi-shutdown due to less orders and slow rework of employees. The start-up rate in March was higher than that in February, mainly due to the fact that most of the plate and belt enterprises in the industry were on holiday in February due to the influence of the epidemic situation, and the start-up rate was relatively low in March, while in March, with the gradual resumption of work and resumption of production, the start-up rate was also relatively higher, and some of the order production plans delayed during the February holiday were released in March, resulting in a significant increase in the start-up rate in March.

Last year, it is still worse than last year, and the terminal consumer market is limited by the weak performance of the epidemic. According to the order category, the performance of building plate and 3C electronic material is relatively stable, the performance of packaging orders such as tank material is relatively weak, the worst is automobile plate, the domestic automobile industry is depressed in March, and foreign car factories in Japan, Europe and the United States and Europe and the United States have stopped production, which has a direct impact on the export of relevant automobile aluminum and domestic trade orders. In addition, most of the aluminum plate and strip enterprises reported that the severity of the epidemic abroad gradually escalated in the middle and late March, and export orders were significantly affected. Customers have withdrawn orders and delayed pick-up of shipments, or customers have been affected by the foreign epidemic and then reduced their orders for cooperation with themselves. In the aspect of finished product inventory, most of the enterprises feedback that their finished product inventory is high, mainly due to the slow pick-up of end customers, and there is obvious pressure on their own funds.

As far as April is concerned, the current corporate feedback is not optimistic. First of all, the export proportion of large plate and strip enterprises in Shandong, Henan, and Fujian is relatively high, between 30% and 50% as a whole, and about 20% of the indirect exports of small and medium-sized enterprises also exist. However, the epidemic situation has not yet appeared an inflection point overseas, and there is even a further serious trend. Overseas countries have adopted measures to seal off countries and ports, and it seems to have become an established fact that export orders continue to decline from April to May. Against the background of weak domestic trade orders, Foreign trade has made matters worse, and the start-up rate in April is expected to be lower than in March.

(SMM Xuman 021-51595898)

 

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
【SMM Berita Kilat Aluminium】Tingkat Daur Ulang Kaleng Aluminium Global Naik Menjadi 76%, Menargetkan 80% pada 2030
3 menit yang lalu
【SMM Berita Kilat Aluminium】Tingkat Daur Ulang Kaleng Aluminium Global Naik Menjadi 76%, Menargetkan 80% pada 2030
Baca Selengkapnya
【SMM Berita Kilat Aluminium】Tingkat Daur Ulang Kaleng Aluminium Global Naik Menjadi 76%, Menargetkan 80% pada 2030
【SMM Berita Kilat Aluminium】Tingkat Daur Ulang Kaleng Aluminium Global Naik Menjadi 76%, Menargetkan 80% pada 2030
Dataset Daur Ulang Wadah Minuman Global 2026 yang dirilis oleh Global Beverage Can Circularity Alliance menunjukkan bahwa tingkat daur ulang kaleng aluminium global meningkat dari 74,8% menjadi 76%, sementara tingkat pengumpulan mencapai 77%, tetap unggul dibandingkan format kemasan minuman utama lainnya. Botol PET mencatat tingkat pengumpulan dan daur ulang masing-masing sebesar 69% dan 54%, dibandingkan dengan 56% dan 51% untuk botol kaca. Dataset ini mencakup pasar yang mewakili setidaknya 84% penjualan global untuk setiap format kemasan. Industri menargetkan tingkat daur ulang 80% untuk kaleng minuman bekas pada tahun 2030, diikuti oleh target mendekati 100% pada tahun 2050. India, Indonesia, Arab Saudi, Türkiye, dan Nigeria termasuk di antara pasar minuman berkembang yang disorot untuk peningkatan lebih lanjut dalam sistem pengumpulan dan daur ulang.
3 menit yang lalu
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
4 menit yang lalu
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
Baca Selengkapnya
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
Canyon Resources’ Minim Martap bauxite project in Cameroon faces fresh uncertainty after AFG Bank Cameroon suspended further drawdowns from the project’s syndicated financing facility on August 24, pending a review of its development schedule, financial model and economic assumptions. Canyon has confirmed that Phase 1 will not meet its previous timetable and has withdrawn its Q4 2026 first-shipment target, with no new date announced. Minim Martap has a mineral resource of around 1.1 billion tonnes and an ore reserve of 144 million tonnes, averaging approximately 51% alumina and 2% silica. Canyon held around AUD 31 million in cash at the end of July, while approximately $75 million had already been drawn from the CFA 82 billion syndicated facility. The company is reducing non-essential spending while reassessing the project’s development and funding pathway.
4 menit yang lalu
【SMM Berita Kilat Aluminium】Caterpillar Luncurkan Tiga Mesin Baru di India untuk Aplikasi Pertambangan dan Infrastruktur
4 menit yang lalu
【SMM Berita Kilat Aluminium】Caterpillar Luncurkan Tiga Mesin Baru di India untuk Aplikasi Pertambangan dan Infrastruktur
Baca Selengkapnya
【SMM Berita Kilat Aluminium】Caterpillar Luncurkan Tiga Mesin Baru di India untuk Aplikasi Pertambangan dan Infrastruktur
【SMM Berita Kilat Aluminium】Caterpillar Luncurkan Tiga Mesin Baru di India untuk Aplikasi Pertambangan dan Infrastruktur
Caterpillar meluncurkan Excavator Hidraulik Cat 355, Dozer Cat D5, dan Motor Grader Cat 120 GC di bauma CONEXPO India 2026, menyasar aplikasi pertambangan, infrastruktur berat, dan konstruksi jalan. Cat 355 dilengkapi mesin C13B dan sistem elektrohidraulik dengan pilihan bucket hingga 4,5 m³, sementara Cat D5 ditenagai mesin C7.1 berkekuatan 170 hp dan dilengkapi blade 4,3 m³. Cat 120 GC dirancang terutama untuk aplikasi pemeliharaan jalan dan perataan akhir. Peluncuran ini semakin memperluas penawaran peralatan Caterpillar untuk sektor pertambangan dan infrastruktur India.
4 menit yang lalu