Indian and US Steel Industries Fight to Get Back to Profitability

Telah Terbit: Dec 03, 2015 15:17 (GMT+8)
Both the USA and India’s steel mills are running at less than capacity thanks to the worldwide steel surplus.

by Sohrab Darabshaw on DECEMBER 3, 2015

Both the USA and India’s steel mills are running at less than capacity thanks to the worldwide steel surplus. US steel mills continue to be buffeted by cheap, mostly Chinese imports and lukewarm demand and no one is willing to bet on when, or if, they will ever come back to full production.

On the other hand, the future of India’s steel industry is tied to the percentage of expenditures on infrastructure that the government is expected to provide. The difference between the two is that India’s economy is merely in revival mode, while the US economy is growing at a rapid pace.

Rating Agencies Weigh In

A recently released report by Fitch Ratings titled, “2016 Outlook: Indian Steel Sector,” says that increased spending on infrastructure projects, such as housing and smart cities is the key to the revival of India’s steel industry.

Indian steelmakers, however, have to face the onslaught of cheap imports just as their counterparts in the US do, especially imports from China. The difference is, the imports work, to an extent, in Indian producers’ favor, as opposed to how badly they harm US steelmakers.

In India, abundant steel only increases domestic demand in India as low prices and more supply are likely to spur government action as costly infrastructure investments are more likely to be seen as relative bargains.

“Spending by the Indian government on infrastructure will be the catalyst for any meaningful improvement in domestic steel demand. The agency expects India’s steel consumption to improve modestly by 7-8% in 2016,” according to the Fitch report.

No doubt, high imports and soft steel prices globally in 2016 might bring up sales in India, but that will still eventually result in far lower prices, meaning less profit for Indian steel producers despite more sales. Steel companies’ margins are likely to be lower in 2016 but could improve, incrementally, in 2017, supported by “(an) improving domestic demand and the imposition of safeguard duty on imports on certain steel products for 200 days,” according to the Fitch report.

The Effect of Tariffs and Duties

As with steelmakers worldwide, the prices of Indian steel dropped almost a quarter year-on-year as of the end of September. The imposition of a 20% duty on certain steel product imports, effective September 14, has saved the day for some Indian steel companies.

In a similar vein, another global ratings agency, Moody’s Investors Service, cautioned that failure to implement reforms in India could hamper investment amid weak global growth.

According to Vikas Halan, a Moody’s vice president and senior credit officer, a healthy 7.5% GDP growth for India for the fiscal year that will end in March 2017 (FY2017) and a pick-up in manufacturing activity will broadly support business growth.

The ratings agency expects upstream oil and gas companies to benefit from lower fuel subsidy burdens, although low crude and domestic natural gas prices will continue to hurt profitability.

Another Negative Outlook

The agency’s negative outlook for the steel industry reflects elevated leverage and an extended period of low prices due to continuing low steel import prices, while the negative outlook for metals and mining companies reflected bleak global commodity prices.

While India’s steelmakers are banking on growth to see them through these difficult times, one of the biggest challenges that the US industry faces is the growth of steel imports. Its best bet is to reduce  imports and pray that the domestic market will swing back to buying for US mills.

Earlier this year, steel companies including AK Steel, Nucor and U.S. Steel filed trade cases to stem the flow of steel products entering the US. The only silver lining was that steel imports into the US have started to come down on a year-over-year basis for the last five months.

Source:metalminer

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
SHFE: Menyetujui Jinchuan Group Co., Ltd. untuk menambah lokasi produksi terdaftar untuk tembaga Grade A merek “JNMC” (katoda permanen-K)
43 menit yang lalu
SHFE: Menyetujui Jinchuan Group Co., Ltd. untuk menambah lokasi produksi terdaftar untuk tembaga Grade A merek “JNMC” (katoda permanen-K)
Baca Selengkapnya
SHFE: Menyetujui Jinchuan Group Co., Ltd. untuk menambah lokasi produksi terdaftar untuk tembaga Grade A merek “JNMC” (katoda permanen-K)
SHFE: Menyetujui Jinchuan Group Co., Ltd. untuk menambah lokasi produksi terdaftar untuk tembaga Grade A merek “JNMC” (katoda permanen-K)
43 menit yang lalu
[SMM Announcement] Harga Logam Pasar Tiongkok dan Pembaruan Berita Dihentikan Selama Libur Hari Nasional (1-7 Okt)
1 jam yang lalu
[SMM Announcement] Harga Logam Pasar Tiongkok dan Pembaruan Berita Dihentikan Selama Libur Hari Nasional (1-7 Okt)
Baca Selengkapnya
[SMM Announcement] Harga Logam Pasar Tiongkok dan Pembaruan Berita Dihentikan Selama Libur Hari Nasional (1-7 Okt)
[SMM Announcement] Harga Logam Pasar Tiongkok dan Pembaruan Berita Dihentikan Selama Libur Hari Nasional (1-7 Okt)
1 jam yang lalu
Koryx Copper Menuntaskan Pengeboran PFS Haib, Targetkan Pembaruan Sumber Daya dan PFS pada Akhir Tahun
1 jam yang lalu
Koryx Copper Menuntaskan Pengeboran PFS Haib, Targetkan Pembaruan Sumber Daya dan PFS pada Akhir Tahun
Baca Selengkapnya
Koryx Copper Menuntaskan Pengeboran PFS Haib, Targetkan Pembaruan Sumber Daya dan PFS pada Akhir Tahun
Koryx Copper Menuntaskan Pengeboran PFS Haib, Targetkan Pembaruan Sumber Daya dan PFS pada Akhir Tahun
Koryx Copper telah menyelesaikan program pengeboran pengisian dan perluasan di Proyek Tembaga Haib yang sepenuhnya dimiliki di Namibia selatan, memajukan proyek tersebut menuju Estimasi Sumber Daya Mineral (MRE) dan Studi Pra-Kelayakan (PFS) terbaru yang ditargetkan untuk dipublikasikan sebelum akhir tahun 2026. Perusahaan melaporkan hasil pengujian dari 18 lubang bor tambahan dengan total 7.074 meter. Di antara hasil terbaru, lubang HM199 menghasilkan 438 meter dengan kadar 0,40% setara tembaga (CuEq), termasuk 224 meter pada 0,51% CuEq. Lubang HM193 menghasilkan 681 meter pada 0,34% CuEq, termasuk 22 meter pada 0,71% CuEq dan 169 meter pada 0,40% CuEq. Koryx menyatakan hasil tersebut terus menunjukkan interval mineralisasi yang luas di seluruh deposit Haib, bersama dengan zona kadar lebih tinggi yang lebih dekat ke permukaan di beberapa area. Perusahaan menyatakan hasil tersebut secara umum berkorelasi dengan model geologi yang ada, sementara program pengeboran yang telah selesai akan menjadi masukan bagi pemodelan geologi dan pekerjaan estimasi untuk estimasi sumber daya terbaru dan PFS. Haib adalah deposit porfiri tembaga-molibdenum-emas diseminasi yang besar. Koryx saat ini membayangkan pengembangan proyek tersebut sebagai operasi tambang terbuka skala besar menggunakan penggilingan sulfida konvensional dan flotasi untuk menghasilkan konsentrat tembaga dan molibdenum. Pengeboran terbaru ini menyusul Estimasi Sumber Daya Mineral Koryx pada Maret 2026, yang melaporkan 744 juta ton material Terindikasi dengan kadar 0,28% tembaga, mengandung sekitar 2,09 juta ton tembaga, dan 579 juta ton material Tereka dengan kadar 0,24% tembaga, mengandung sekitar 1,39 juta ton tembaga, menggunakan batas kadar 0,15% tembaga. Koryx menyatakan MRE dan PFS terbaru tetap sesuai jadwal untuk dipublikasikan sebelum akhir tahun 2026. Penyelesaian program pengeboran PFS menandai langkah lain dalam kemajuan Koryx Copper terhadap Haib menuju potensi pengembangan tembaga skala besar. Pengeboran terbaru terus menunjukkan interval mineralisasi yang luas, sementara estimasi sumber daya terbaru yang akan datang akan memberikan kejelasan lebih besar mengenai apakah pengeboran pengisian dan perluasan baru-baru ini telah mengubah basis sumber daya proyek secara material. Perhatian kini akan beralih ke MRE dan PFS terbaru yang diharapkan sebelum akhir tahun, yang seharusnya memberikan rincian lebih lanjut mengenai konfigurasi tambang yang diusulkan, strategi pemrosesan, profil produksi, dan keekonomian proyek.
1 jam yang lalu
Indian and US Steel Industries Fight to Get Back to Profitability - Shanghai Metals Market (SMM)