SMM Base Metals Weekly Price Review and Forecast (Mar. 16-20, 2015)

Telah Terbit: Mar 18, 2015 09:46
Chinese shares showed big swings last week and ended with a 3% gain.

SHANGHAI, Mar. 17 (SMM) –

Although China’s economic data released last week were disappointing, Remarks of PBOC’s governor Zhou Xiaochuan at a press conference cheered up the market. In the euro zone, economic signposts remained weak and the risk of a Greek default increased, pushing the euro to a 12-year low. That, combined with anticipation for Fed’s interest rate increase, drove the US dollar index to 100. Crude oil and gold were relatively firm.

SMMI.Al increased 1%, and SMMI.Cu posted a 0.71% rise laset week. SMMI.Pb edged up 0.42%, while SMMI.Zn dropped 0.96%. SMMI.Sn fell by 1.19% partly dragged by the 5% slump in LME tin. SMMI.Ni dropped 0.68%. SMMI rallied after initial falls and ended last week up 0.37%.

Copper
Chinese shares showed big swings last week and ended with a 3% gain. SHFE copper prices moved between RMB 41,800-42,800/mt, and both trading volumes and positions remained stable. SHFE copper may thus test resistance at RMB 43,300/mt.

In China’s spot copper market, cargo holders held prices firm. Dealers entered market to source lower-priced goods, and the price spread between standard and high-quality copper narrowed.

Aluminum
SHFE 1505 aluminum contract dropped to RMB 12,865/mt, but rallied to RMB 13,290/mt later in the week. Many investors exited the market, leaving the most active contract hovering around RMB 13,000/mt. In China’s spot market, inventories kept growing, but sellers did not panic. Processors sought cheap goods. Spot prices gained less than SHFE aluminum, causing spot discounts to expand.

Improving market sentiment will push SHFE 1505 aluminum contract up further, but poor market fundamentals will temper gains, with prices expected between RMB 13,000-13,200/mt this week. In China’s spot market, higher prices will cool buying. Spot aluminum should trade at discounts of RMB 170-220/mt over SHFE front-month contract.

Lead
SHFE 1505 lead contract underperformed LME lead at the beginning of last week and moved at RMB 12,200-12,300/mt, but started rising on Wednesday to climb above RMB 12,300/mt. SHFE 1505 lead contract prices are expected at RMB 12,300-12,450/mt and test resistance at RMB 12,450/mt.

Spot lead trading in China showed some improvement last week. Limited supply of branded goods in Shanghai left prices in the region RMB 100/mt higher than those in Henan. Thus, some downstream buyers preferred to purchase from Henan. However, tight cash supply and sizeable inventories prevented downstream producers from buying in large amounts.

Zinc
In Shanghai’s spot market, spot premiums of #0 zinc against SHFE 1505 zinc contract prices narrowed from RMB 30-90/mt to zero. Inventories at smelters were high. When combined with a large influx of imported zinc and selloffs by traders, supply was ample. Demand also improved, causing trading to grow. Discounts on #0 zinc price in Tianjin over Shanghai price contracted from RMB 140/mt to RMB 40/mt. Some smelters held back goods on falling zinc prices, which in turn bolstered zinc prices. Downstream galvanizers purchased modestly on low operating rates and falling zinc prices.

Discounts on #0 zinc price in Guangdong against Shanghai prices narrowed from RMB 50-60/mt to RMB 20-30/mt. Guangdong’s inventories stabilized. But large shipments arriving after the Chinese New Year holiday add to supply, which weighed on spot premiums/discounts against SHFE 1505 zinc contract prices. Trading was brisk early last week as downstream buyers purchased at lower prices, but weakened in the latter half of the week.

Few deliveries are expected in China’s spot markets this week, but a large inflow of imported zinc, combined with ample supply from smelters, will leave supply healthy. Downstream buyers, though, remain bearish towards near-term zinc prices, so are buying to need despite their own rising operating rates. Spot discounts against SHFE 1505 zinc contract prices should widen to RMB 100/mt.

Tin
Tin prices in Shanghai spot market were stable between RMB 122,000-125,000/mt last Monday, but fell to RMB 121,500-124,500/mt the next day as a USD 325/mt decline in LME tin turned market players in domestic market bearish. Prices dropped further to RMB 121,000-124,000/mt later in the week after LME tin retreated from USD 17,600/mt.

Nickel
SMM #1 spot nickel prices averaged RMB 104,240/mt last week, down by RMB 510/mt on a weekly basis. Transactions between traders picked up, while downstream producers were cautious towards purchases. Jinchuan Group cut prices twice last week by RMB 500/mt to RMB 104,500/mt.

The number of imported nickel entering Chinese market this week will remain limited, but Jinchuan Group will increase supply. Meanwhile, downstream demand is unlikely to improve. Thus, spot nickel prices will be RMB 103,500-106,500/mt.
 

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Peningkatan Ekonomi Tambang Polimetalik Boumadine di Maroko
14 jam yang lalu
Peningkatan Ekonomi Tambang Polimetalik Boumadine di Maroko
Baca Selengkapnya
Peningkatan Ekonomi Tambang Polimetalik Boumadine di Maroko
Peningkatan Ekonomi Tambang Polimetalik Boumadine di Maroko
14 jam yang lalu
Greenland Mines Menyelesaikan Program Pengambilan Sampel Curah 104,8 Ton di Proyek PGM Skaergaard
17 jam yang lalu
Greenland Mines Menyelesaikan Program Pengambilan Sampel Curah 104,8 Ton di Proyek PGM Skaergaard
Baca Selengkapnya
Greenland Mines Menyelesaikan Program Pengambilan Sampel Curah 104,8 Ton di Proyek PGM Skaergaard
Greenland Mines Menyelesaikan Program Pengambilan Sampel Curah 104,8 Ton di Proyek PGM Skaergaard
[SMM Flash] Greenland Mines telah menyelesaikan program pengambilan sampel curah seberat 104,8 ton di tujuh lokasi pada proyek paladium-platina-emas Skaergaard di Greenland Timur. Sampel-sampel tersebut sedang disiapkan untuk uji metalurgi skala besar dan skala percontohan di GTK Mintec di Finlandia, sementara perusahaan melanjutkan studi rekayasa, pemrosesan, infrastruktur, dan pengelolaan limbah yang bertujuan untuk memajukan evaluasi teknis proyek. Sumber daya S-K 1300 Skaergaard saat ini mencakup sekitar 15,0 juta ons PdEq Terindikasi dan 17,49 juta ons PdEq Tereka, menurut Greenland Mines. Program pengujian curah ini merupakan langkah penting dalam mengevaluasi opsi pemrosesan dan perolehan kembali untuk salah satu sistem paladium-platina-emas besar yang belum dikembangkan di luar wilayah pasokan utama Afrika Selatan, Zimbabwe, dan Rusia. Namun, Sumber Daya Mineral yang dilaporkan bukanlah Cadangan Mineral dan program terbaru ini bukan merupakan keputusan pengembangan atau produksi komersial.
17 jam yang lalu
Two Rivers Memajukan Pekerjaan Validasi untuk Proyek Merensky, Potensi Output 182.000 ons 6E per Tahun
17 jam yang lalu
Two Rivers Memajukan Pekerjaan Validasi untuk Proyek Merensky, Potensi Output 182.000 ons 6E per Tahun
Baca Selengkapnya
Two Rivers Memajukan Pekerjaan Validasi untuk Proyek Merensky, Potensi Output 182.000 ons 6E per Tahun
Two Rivers Memajukan Pekerjaan Validasi untuk Proyek Merensky, Potensi Output 182.000 ons 6E per Tahun
[SMM Flash] Two Rivers, perusahaan patungan PGM Afrika Selatan antara African Rainbow Minerals dan Impala Platinum, sedang memajukan pekerjaan validasi teknis untuk proyek Merensky di sisi timur Kompleks Bushveld. Modal untuk pekerjaan awal telah disetujui selama FY2026 untuk menyelesaikan studi yang diperlukan guna menentukan langkah ke depan proyek tersebut. Konsentrator Merensky telah diresmikan selama enam bulan hingga Desember 2024 tetapi kemudian ditempatkan dalam status perawatan dan pemeliharaan di tengah kondisi pasar PGM yang menantang. Proyek ini memiliki biaya modal yang dinyatakan sekitar R7,3 miliar dan dirancang untuk memproduksi sekitar 182.000 ons PGM 6E per tahun pada kondisi stabil, bersama dengan sekitar 1.600 ton nikel per tahun dan 1.300 ton tembaga per tahun. Oleh karena itu, dimulainya kembali operasi dapat memberikan pasokan PGM tambahan yang berarti dari operasi Afrika Selatan yang sudah ada. Namun, proyek ini masih dalam tahap validasi teknis dan belum ada tanggal dimulainya kembali atau keputusan akhir untuk melanjutkan produksi yang diumumkan.
17 jam yang lalu