Dual Pressure from Policy and Demand, Weekly Operating Rate of Secondary Aluminum Producers Pulled Back [SMM Cast Aluminum Alloy Morning Comment]

Published: May 15, 2026 08:56
[SMM Cast Aluminum Alloy Morning Comment: Dual Pressure from Policy and Demand, Secondary Aluminum Weekly Operating Rate Pulls Back] ADC12 prices are expected to move sideways in the short term. On the cost side, high-level support, combined with the tightening of reverse invoicing and expectations for production cuts at some enterprises, limits the downside room for prices; however, demand is unlikely to see significant improvement in the short term, and inventory remains in an accumulation cycle, which will continue to suppress upside room for prices. Going forward, key attention should be paid to the recovery of end-use consumption and the further impact of policies on the scale of production cuts on the supply side.

5.15 SMM Cast Aluminum Alloy Morning Comment

Futures: The most-traded aluminum alloy 2607 contract opened at 23,380 yuan/mt in the night session, hitting a high of 23,380 yuan/mt and a low of 23,240 yuan/mt, before closing at 23,290 yuan/mt, down 165 yuan/mt or 0.70% from the previous trading day. After the night session opened, bulls lacked momentum, and prices fluctuated downward, running below the average price line throughout the day. Trading volume was 1,726 lots, and open interest edged up by 43 lots to 13,829 lots. Futures struggled to rebound, bearish sentiment persisted, and futures prices were under pressure in the short term, with downside support yet to be tested.

Spot-futures price spread daily report: According to SMM data, on May 14, the SMM ADC12 spot price theoretical premium over the most-traded cast aluminum alloy contract (AD2606) at the 10:15 closing narrowed to 300 yuan/mt.

Weekly operating rate: This week, the operating rate of secondary aluminum industry leaders fell 0.6 percentage points WoW to 56.4%. Operating rates showed mixed performance among enterprises during the week: the fading impact of the Labour Day holiday and capacity expansion at individual enterprises drove partial recovery in operating rates, but production cuts were more widespread across the industry. Production cuts were mainly dragged by two factors: first, weakening demand. As the industry entered the off-season, orders from downstream die-casting enterprises remained sluggish, with procurement dominated by just-in-time, small-batch purchases. Second, policy tightening. The reverse invoicing policy was further tightened, making it more difficult to obtain invoiced raw materials, passively raising procurement costs for enterprises, with regions such as Hubei and Anhui notably affected, where insufficient compliant raw materials forced some enterprises to cut or halt production. If demand weakens again and policy restrictions persist, the industry operating rate is expected to have further downside room in the short term.

Social inventory: As of this Thursday, social inventory of secondary aluminum alloy ingots in major consumption areas in China was 58,700 mt, up 1,400 mt WoW, marking five consecutive weeks of inventory buildup. The off-season effect continued to deepen, with insufficient downstream purchase willingness, shipments under pressure, and the inventory buildup trend continuing.

Aluminum scrap: Supply side was significantly constrained by policies, with strict enforcement of reverse invoicing leading to a shortage of compliant invoice sources, rising industry costs, and yards generally holding back from selling and holding prices firm. According to survey feedback, warehouse inflows at mainstream yards in east China declined YoY, showing a slight inventory buildup trend, while aluminum tense scrap inventory pulled back somewhat. On the import side, persistently high LME prices creating inverted economics made import traders more cautious, and subsequent imports are expected to pull back. Demand side entered the traditional consumption off-season, with secondary aluminum enterprise operating rates pulling back slightly. Tax enforcement pressure combined with low-price difficulties caused some enterprises to cut or halt production, further weakening market demand. The aluminum tense scrap segment maintained a low-inventory just-in-time procurement model, and while the wrought aluminum alloy scrap segment received slight support from sheet and strip operating rates, overall strength was limited, with sluggish market transactions and strong wait-and-see sentiment. Next week, the aluminum scrap market is expected to continue fluctuating at highs, with shredded aluminum tense scrap (priced based on aluminum content) mainstream range maintained at 20,500-21,300 yuan/mt (tax-exclusive).

Silicon metal: Spot prices were mostly stable this week, with prices for some specifications edging down slightly. As of May 14, SMM east China oxygen-blown #553 silicon was at 9,200-9,400 yuan/mt, down 50 yuan/mt WoW; #441 silicon was at 9,400-9,600 yuan/mt, flat WoW; #3303 silicon was at 10,100-10,300 yuan/mt, flat WoW. In terms of market transactions, downstream users showed strong wait-and-see sentiment amid this round of price fluctuations, with transactions mainly driven by just-in-time restocking. Supply side, temporary shutdowns for furnace maintenance at individual northern silicon plants this week affected short-term production, with supply expected to gradually recover next week. Combined with expectations for production increase at some southwestern silicon enterprises in June, the certainty of increased silicon metal supply in June is relatively strong. Supply and demand were basically balanced in May, while supply increments are expected to exceed demand increments in June. From an industry fundamentals perspective, weak demand kept silicon metal prices soft before shifting to moving sideways, with attention on whether new price drivers emerge subsequently.

Markets outside China: Current import ADC12 quotes rose to a high range of $3,360-3,450/mt, with immediate import losses exceeding 3,000 yuan/mt, and the theoretical import window remained closed.

Summary: ADC12 prices are expected to move sideways in the short term. High-level cost support combined with tightened reverse invoicing and expectations for production cuts at some enterprises limit downside room; however, demand side is unlikely to see significant improvement in the short term, and inventory remains in a buildup cycle, which will continue to suppress upside room. Subsequent focus should be on end-use consumption recovery and the further impact of policies on supply-side production cut scale.

[Data source disclaimer: Data other than publicly available information is derived from public information, market communication, and SMM's internal database models, processed by SMM for reference only and does not constitute decision-making advice.]

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
SHFE Aluminum Prices Plunge; Central China Market Sees Increased Buying Sentiment and Firm Quotations
4 hours ago
SHFE Aluminum Prices Plunge; Central China Market Sees Increased Buying Sentiment and Firm Quotations
Read More
SHFE Aluminum Prices Plunge; Central China Market Sees Increased Buying Sentiment and Firm Quotations
SHFE Aluminum Prices Plunge; Central China Market Sees Increased Buying Sentiment and Firm Quotations
During yesterday's night session and today's morning session, SHFE aluminum futures prices plunged. In the Central China market, downstream processing enterprises' buying sentiment recovered somewhat, and their stockpiling willingness increased. Trading firms engaging in both spot and futures markets were inclined to quickly capture price spreads, with significant sentiment of holding prices firm and holding back from selling, driving market quotations to stay high. Ultimately, the actual transaction price range in the Central China market was around a discount of 120-140 yuan/mt against the SHFE aluminum July contract.
4 hours ago
Chalco Zhengzhou Develops 7th-Gen Aluminum Electrolysis Control System, Enhancing Efficiency and Stability
5 hours ago
Chalco Zhengzhou Develops 7th-Gen Aluminum Electrolysis Control System, Enhancing Efficiency and Stability
Read More
Chalco Zhengzhou Develops 7th-Gen Aluminum Electrolysis Control System, Enhancing Efficiency and Stability
Chalco Zhengzhou Develops 7th-Gen Aluminum Electrolysis Control System, Enhancing Efficiency and Stability
Chalco Zhengzhou Research Institute has actively responded to the requirements of Chalco Group's "3+4+4+4" scientific and technological innovation system, closely aligned with the "four special strengths" objectives and the "Digital-Intelligent New Chalco" development direction, and successfully developed the seventh-generation aluminum electrolysis pot control system. The system has achieved breakthroughs in key technical areas such as intelligent crust breaking, current distribution optimization, and online monitoring. By innovating material balance and energy balance algorithms, it has significantly enhanced three core capabilities: real-time perception of operating conditions, intelligent decision-making response, and precise control. In industrial application, the new-generation pot control system has demonstrated notable advantages: the precision of alumina concentration control has been substantially improved, effectively ensuring the long-term stable operation of electrolysis pots; current efficiency has achieved a breakthrough increase, providing key technical equipment support for aluminum enterprises to realize stable and high production as well as reduced energy consumption. Recently, Chalco Zhengzhou Research Institute reached a strategic cooperation with a key enterprise in the Xinjiang region and signed a supply agreement for 240 pot control systems, a move that will further accelerate the intelligent transformation of the aluminum electrolysis industry.
5 hours ago
Canada Seeks Tariff Relief in US Trade Talks, USMCA Review Looms
5 hours ago
Canada Seeks Tariff Relief in US Trade Talks, USMCA Review Looms
Read More
Canada Seeks Tariff Relief in US Trade Talks, USMCA Review Looms
Canada Seeks Tariff Relief in US Trade Talks, USMCA Review Looms
Canada’s ambassador to the US said that in trade negotiations with Washington, Canada’s top objective is to secure relief from the hefty tariffs the US has imposed on key industrial sectors such as steel, aluminum, and automobiles. Mark Wiseman, a former pension fund and BlackRock executive, noted that Canadians need not focus excessively on the formal review process for the existing US-Mexico-Canada Agreement (USMCA), which is about to begin on July 1. Wiseman told business figures that senior Trump administration officials, led by US Trade Representative Jamieson Greer, have indicated they intend to keep the agreement but will make amendments to it. Moreover, even if a renewal deal is not reached after July 1, the USMCA’s provisions will remain in effect for another decade, continuing until 2036.
5 hours ago
Register to Continue Reading
Gain access to the latest insights in metals and new energy
Already have an account?Sign in here
Dual Pressure from Policy and Demand, Weekly Operating Rate of Secondary Aluminum Producers Pulled Back [SMM Cast Aluminum Alloy Morning Comment] - Shanghai Metals Market (SMM)