SMM Morning Comment For SHFE Base Metals On August 12

Publié: Aug 12, 2024 09:42
Source: SMM
LME copper opened at $8,923.5/mt overnight, peaked at $8,950/mt in early trading, then fluctuated downward, hitting a low of $8,829.5/mt at the end of the session, and finally closed at $8,831/mt, up 0.25%.

SHANGHAI, August 12 (SMM) –

Copper

LME copper opened at $8,923.5/mt overnight, peaked at $8,950/mt in early trading, then fluctuated downward, hitting a low of $8,829.5/mt at the end of the session, and finally closed at $8,831/mt, up 0.25%. Trading volume reached 17,000 lots, and open interest reached 287,000 lots. The most-traded SHFE copper 2409 contract opened at 71,750 yuan/mt overnight, peaked at 72,150 yuan/mt in early trading, then fluctuated downward, hitting a low of 71,330 yuan/mt at the end of the session, and finally closed at 71,510 yuan/mt, up 0.12%. Trading volume reached 39,000 lots, and open interest reached 166,000 lots.

Macro side, the US Fed turned hawkish again. Fed Governor Bowman stated that inflation poses an upside risk, the labour market continues to strengthen, and a cautious stance will be maintained at the September meeting, causing copper prices to fluctuate downward. Meanwhile, the latest assessment from Israeli intelligence is that Iran has decided to directly attack Israel. Additionally, Ukraine has entered Russian territory, and the International Atomic Energy Agency has indicated that the conflict could endanger nuclear power plants, raising geopolitical conflict risks again.

Fundamentals side, from the consumption perspective, copper prices rebounded, and downstream purchasing sentiment significantly improved. Overall, with the US Fed's hawkish remarks and rising geopolitical conflict risks, copper prices are expected to remain weak and volatile.

Aluminum

Market: Last Friday night, the most-traded SHFE 2409 aluminum contract opened at 19,170 yuan/mt. Bears built positions, pushing the price to a high of 19,225 yuan/mt, with the lowest point at 19,085 yuan/mt. It closed at 19,125 yuan/mt, up 45 yuan/mt, an increase of 0.24%. LME aluminum opened at $2,280/mt last Friday, reaching a high of $2,329.5/mt and a low of $2,280/mt. It closed at $2,295/mt, up $11/mt, an increase of 0.48%.

Summary: On the macro front, the Chinese government continues to boost the domestic economy, while the US Fed's interest rate cuts remain uncertain. In the short term, there are still many uncertainties on the macro side. Fundamentally, the domestic operating capacity of aluminum is gradually stabilizing, and the supply is gradually peaking. After entering August, downstream consumption of aluminum showed signs of stabilizing and recovering, and the market is waiting for the turning point in the social inventory of aluminum ingots. In the short term, both bullish and bearish factors are converging on the macro and fundamental sides, and aluminum prices may bottom out.

Lead

Last Friday, LME lead opened at $1,979.5/mt. With US economic data better than expected, market concerns about a recession eased, and LME lead showed a fluctuating upward trend. Meanwhile, LME lead inventories continued to decline, and LME lead gradually reached the $2,000/mt mark, peaking at $2,047.5/mt during the session. By the close, LME lead settled at $2,039.5/mt, up 2.9%.

Last Friday, the most-traded SHFE lead 2409 contract opened at 17,980 yuan/mt. With the accumulation of lead ingots and the expectation of reduced secondary lead production coexisting, the market saw intensified long-short deadlock, and SHFE lead showed a high-level consolidation state. During the session, SHFE lead attempted to break through the 18,000 yuan/mt mark but failed, peaking at 17,995 yuan/mt and finally closing at 17,900 yuan/mt, up 1.24%. Its open interest reached 81,811 lots, an increase of 1,461 lots from the previous trading day.

Zinc

SMM, Aug 12: Last Friday, US Fed Governor Bowman hinted at caution regarding rate cuts; Israeli intelligence assessed that Iran would attack soon; Ukrainian forces advanced into Russian territory, raising concerns about the safety of nuclear power plants; Nasdaq plans to eliminate suspicious companies with stock prices below $1/share; the central bank announced a gradual increase in government bond transactions in open market operations; the central bank issued a significant document supporting the sustainable development of the housing rental industry; China's CPI in July rose 0.5% YoY and 0.5% MoM; the National Development and Reform Commission actively supports the development of key areas in service consumption.

Last Friday, LME zinc opened at $2,645.5/mt, briefly dipped below $2,648/mt at the beginning of the session, then longs increased their positions, and LME zinc fluctuated upwards, reaching a high of $2,776.5/mt during the night session, and finally closed up at $2,740.5/mt, up $97.5/mt, or 3.69%. Trading volume increased to 15,014 lots, and open interest increased by 1,317 lots to 223,000 lots. Last Friday, LME zinc recorded a large bullish candlestick, with LME inventory decreasing by 2,100 mt to 239,925 mt, a drop of 0.87%. Better-than-expected US employment data boosted the market, and macro sentiment was bullish, leading to a rebound in LME zinc. It is expected that LME zinc will fluctuate today.

Last Friday, the most-traded SHFE zinc 2409 contract opened at 22,845 yuan/mt. At the beginning of the session, shorts exited the market, and SHFE zinc's focus shifted upwards, fluctuating near the average daily line, reaching a high of 22,960 yuan/mt during the session, and finally closed up at 22,890 yuan/mt, up 285 yuan/mt, or 1.26%. Trading volume decreased to 100,000 lots, and open interest decreased by 815 lots to 74,441 lots. Last Friday, SHFE zinc recorded a bullish candlestick, with macro sentiment being bullish, and domestic inventory continued to decrease, strengthening positive sentiment. It is expected that SHFE zinc will fluctuate and consolidate today.

Tin

Last Friday night, SHFE 2409 tin contract fell to 256,050 yuan/mt, up 2,560 yuan/mt, an increase of 1.01%, with a high of 259,600 yuan/mt and a low of 255,250 yuan/mt.

Last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 1,000-1,500 yuan/mt over SHFE 2409 tin contract, versus premiums of 800-1,500 yuan/mt for delivery brands, premiums of 1,000-1,700 yuan/mt for Yunxi brand. Last Friday, tin prices moved rangebound, with downstream companies cautious due to high prices, resulting in limited purchasing. Overall, the spot market was relatively moderate last Friday.

Nickel

Last week, nickel prices saw a significant rebound on Friday. By the close on Friday, the most-traded SHFE nickel contract recorded 130,900 yuan/mt. Last week, nickel prices were mainly affected by macro sentiment, with fundamentals somewhat limiting the price increase. On the macro side, the early-week decline in nickel prices was influenced by the US July unemployment rate and non-farm payrolls data. The data showed an unemployment rate of 4.3% and an increase of 114,000 in non-farm payrolls, sparking market concerns about a recession and causing a sharp drop in overall market prices. However, by Thursday, data from the US Department of Labor indicated that initial jobless claims for the week were 233,000, lower than the expected 240,000 and the previous value of 249,000. This data suggested an improvement in the job market, alleviating recession fears and driving a rebound in commodity and the US dollar index. Fundamentally, SMM data showed that national refined nickel production in July was about 28,900 mt, up 8.2% WoW and 33.87% YoY. Both domestic and overseas inventories accumulated. The domestic market saw inventory increases due to rising stocks and the arrival of overseas nickel plates; overseas inventory grew mainly as domestic and Indonesian electro-deposited nickel entered LME Asian warehouses as futures inventory. Inventory pressure limited the upward space for nickel prices. Demand side, spot market transactions were sluggish last week, mainly because downstream customers had overstocked during the previous nickel price decline, with some extreme cases stocking up until September, thus preemptively exhausting Q3 demand. Therefore, nickel prices had limited support from the demand side. Overall, nickel prices are expected to fluctuate upward this week under the influence of macro sentiment, but supply pressure from fundamentals will limit the upward space for nickel prices.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 10 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 12 heures