SMM Morning Comment For SHFE Base Metals On July 31

Publié: Jul 31, 2024 09:36
Source: SMM
LME copper opened at $8,954/mt overnight.

SHANGHAI, July 31 (SMM) –

Copper

LME copper opened at $8,954/mt overnight, experienced wide fluctuations initially and hit a session low of $8,915/mt. It then rebounded, reaching a session high of $9,046.5/mt, and finally closed at $9,031/mt, up 0.07%. Trading volume reached 19,000 lots, and open interest reached 291,000 lots. Overnight, the most-traded SHFE 2409 copper contract opened at 73,040 yuan/mt and initially fluctuated downward, hitting a session low of 72,740 yuan/mt. It then rebounded, reaching a session high of 73,580 yuan/mt, and finally closed at 73,510 yuan/mt, up 0.04%. Trading volume reached 70,000 lots, and open interest reached 181,000 lots. Macro front, several Japanese media outlets reported late at night that the Bank of Japan would raise interest rates by 15 basis points at the meeting ending today, exceeding market expectations. Meanwhile, as the market awaited, the US Fed's spokesperson indicated that a rate cut in July was almost impossible, but changes in the Fed's statement should be closely monitored, which might suggest an increased possibility of a rate cut in September. Although copper prices opened lower overnight due to overseas inventories and market uncertainties, they ultimately closed slightly higher. Fundamentals side, copper prices continued to run weak, but downstream trading sentiment did not significantly rebound for fear of falling prices. Supply side, the inflow of imported copper is expected to decrease in early August. Overall, attention should be paid to the Bank of Japan's interest rate decision today. If it raises rates as expected, copper prices may be boosted.

Aluminum

Market: The most-traded SHFE aluminum 2409 contract opened at 18,840 yuan/mt overnight, reaching a high of 19,040 yuan/mt and a low of 18,790 yuan/mt, and closed at 19,010 yuan/mt, up 60 yuan/mt, or 0.32%. The previous trading day, LME aluminum opened at $2,249.5/mt, hit a high of $2,253/mt and a low of $2,209.5/mt, and closed at $2,238/mt, down $9/mt, or 0.40%.

Summary: On the macro side, global market liquidity is gradually increasing, and regional conflict remain unpredictable. On the fundamentals side, domestic aluminum supply continues to grow, with a significant YoY increase in net imports of primary aluminum. Downstream aluminum processing and end-user demand are in the off-season, with the operating rate in the aluminum processing industry hitting a low point, and some stimulus measures have yet to show effect. Social inventory is at a three-year high for the same period, and spot discounts persist. On the cost side, some material prices are at risk of falling. In the short term, aluminum fundamentals continue to exert downward pressure on aluminum prices, while macro fluctuations are relatively large. In the short term, attention should be paid to the impact of macro changes on aluminum prices.

Lead

Overnight, LME lead opened at $2,038.5/mt, fluctuated downward during the Asian session, dipped to $2,030/mt in the European session, and after a slight consolidation, closed at $2,035.5/mt, down $27/mt, a decrease of 1.31%.

Overnight, the most-traded SHFE 2409 lead contract opened at 18,460 yuan/mt, slightly consolidated at the beginning of the session, and then climbed to a high of 18,970 yuan/mt. It slightly fell to around 18,800 yuan/mt, and closed at 18,835 yuan/mt, up 145 yuan/mt, an increase of 0.78%.

Zinc

Overnight, LME zinc opened at $2,641/mt. After the opening, LME zinc fluctuated widely around the average daily line, reaching a high of $2,651/mt during the midday session. It then retreated and fell to a low of $2,615/mt. At the end of the trading session, LME zinc rose again and closed at $2,650.5/mt, up $11.5/mt, or 0.44%. The trading volume increased to 9,714 lots, and the open interest rose by 3,355 lots to 221,000 lots. LME zinc inventory decreased by 2,125 mt to 238,425 mt, a drop of 0.88%. Overnight, LME zinc recorded a bullish candlestick, with the 5-day moving average forming resistance above. Although the US June JOLTs job openings were higher than expected and the previous value was revised upwards, indicating that the labour market remained resilient, the market's optimistic sentiment towards a US Fed rate cut in September persisted, and LME zinc continued to fluctuate.

Overnight, the most-traded SHFE zinc 2409 contract opened at 22,450 yuan/mt. At the beginning of the session, SHFE zinc fell to 22,360 yuan/mt, then fluctuated upwards above the average daily line, reaching a high of 22,685 yuan/mt. Subsequently, SHFE zinc retreated to near the average daily line, and at the end of the trading session, it rose again and closed at 22,650 yuan/mt, up 155 yuan/mt, or 0.69%. The trading volume increased to 97,354 lots, and the open interest decreased by 1,423 lots to 92,536 lots. Overnight, SHFE zinc recorded a bullish candlestick, with the lower Bollinger Bands providing support. Recently, the non-ferrous metals market prices has shown a weak trend. However, on July 30, the Central Committee of the Communist Party of China held a meeting, proposing to expand domestic demand with a focus on boosting consumption. Market sentiment was somewhat lifted, and SHFE zinc prices center rose. Attention should be paid to the subsequent performance of domestic consumption.

Tin

In the night session yesterday, the most-traded SHFE tin futures contract closed at 244,360 yuan/mt, down by 70 yuan/mt, a decrease of 0.03%, with a high of 244,980 yuan/mt and a low of 237,830 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 500-1,500 yuan/mt over SHFE 2409 tin contract, versus premiums of 500-1,500 yuan/mt for delivery brands, and premiums of 700-1,100 yuan/mt for Yunxi brand. Tin prices fluctuated downward yesterday, with a slight rebound in the night session. Most downstream producers made small restocking purchases. Overall, the spot market remained active yesterday.

Nickel

On July 30, Jinchuan nickel was quoted at a premium of 1,900-2,000 yuan/mt, with an average of 1,950 yuan/mt, down 200 yuan/mt compared to the previous trading day. Norilsk nickel was quoted at a discount of 0-300 yuan/mt, with an average of 150 yuan/mt, down 225 yuan/mt compared to the previous trading day. In the morning, the market fluctuated downward, and spot premiums fell significantly as the contract that quotes are based on changed (the current futures structure is contango). Nickel briquette prices were 125,600-125,900 yuan/mt, an increase of 450 yuan/mt compared to the previous trading day. The price spread between nickel briquette and nickel sulphate was about 2,659 yuan/mt (nickel sulphate prices were 2,659 yuan/mt higher than nickel briquette prices).

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 12 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 14 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 14 heures
SMM Morning Comment For SHFE Base Metals On July 31 - Shanghai Metals Market (SMM)