SMM Morning Comment For SHFE Base Metals On June 27

Publié: Jun 27, 2024 10:05
Source: SMM
Overnight LME copper opened at $9556 /mt, touching a low of $9508/mt during the session, and finally closed at 9595 /mt at the end of the session, with a trading volume of 21,000 lots and a position of 326,000 lots.

SHANGHAI, June 27 (SMM) –
Copper
Overnight LME copper opened at $9556 /mt, touching a low of $9508/mt during the session, and finally closed at 9595 /mt at the end of the session, with a trading volume of 21,000 lots and a position of 326,000 lots. Overnight, the most active SHFE 2408 copper contract opened at 78420 yuan/ton, touched above 78420 yuan/ton at the beginning of the session, and then fluctuated downward, touching a low of 77740 yuan/ton during the session, and finally closed at 78080 yuan/ton at the end of the session, an increase of 0.08%, with a trading volume of 49,000 lots and a position of 181,000 lots. In terms of macroeconomics, the Federal Reserve said that all 31 banks tested passed the Federal Reserve's annual stress test, which helped the market ease the sentiment of the Federal Reserve's insistence on high interest rates. The US dollar index still maintains a high level, which suppresses copper prices. Pay attention to the labor data and inflation data to be released tonight, which will provide guidance for copper prices. In terms of fundamentals, the copper price fell and did not cause downstream replenishment. This is mainly because demand has entered the off-season, new orders are relatively small, and downstream companies have no motivation to replenish. In terms of price, it is expected that there will still be pressure on the copper price.

Aluminum
Market: The overnight SHFE 2408 most-traded aluminum contract opened at 20,320 yuan/mt, with a high of 20,380 yuan/mt, a low of 20,250 yuan/mt, and closed at 20,300 yuan/mt, up 70 yuan/mt, an increase of 0.35%. The previous trading day, LME Aluminum opened at $2,496/mt, with a high of $2,516/mt, a low of $2,482/mt, and closed at $2,511.5 /mt, up $14.97/mt, an increase of 0.6%.

Summary: On the macro level, the Federal Reserve is hawkish, the interest rate cut may be postponed until next year, and there may be a rate hike depending on inflation data; domestically, the trade-in policy continues to exert force, new real estate policies are being introduced in various places, aiming to further promote domestic consumption. On the fundamental, domestic aluminum production capacity maintains high, boosted by the rebound of aluminum billets processing fees, the proportion of aluminum alloying rebounded, and the industry's ingot production decreased. Affected by the pullback in aluminum prices, the daily inventory of aluminum ingots slightly decreased, but the social inventory of aluminum ingots is still at a high level for the same period in history, and the process of de-stocking still faces certain resistance. At the same time, according to SMM research, new orders in industries such as photovoltaics and automobiles are not ideal, and the operating rate of aluminum processing companies will maintain a low level in the short term. Under the weak macro background, coupled with the weakening trend of downstream consumption expectations, the market capital sentiment maintains a wait-and-see attitude, SMM expects that aluminum prices may show a wide range of fluctuations in the short term.

LeadOvernight, LME lead opened at $2212.5/ton and fluctuated sideways in the Asian session; entering the European session, due to the rise and then decline of the US dollar index, LME lead briefly fell and then rose to $2218.5/ton. In the late trading, short positions increased and LME lead weakened and fell to $2187/ton, and finally closed at $2191.5/ton, a drop of 0.93%.
Overnight, the most active SHFE 2408 lead contract opened high at 19265 yuan/ton, touched the high of 19340 yuan/ton at the beginning of the session, and fluctuated around 19265 yuan/ton after a slight decline. The lowest during the period was 19215 yuan/ton, and prices finally closed at 19265 yuan/ton, an increase of 0.73%.

Zinc
Overnight, LME zinc opened at $2863.5/ton and touched a high of $2955.5/ton. It finally closed up at $2944/ton, up $82/ton, or 2.87%. The trading volume increased to 13060 lots, and the position increased by 1895 lots to 232,000 lots. Overnight LME zinc inventory decreased by 350 tons to 239,850 tons, a decrease of 0.15%, and LME inventory recorded a decrease. Affected by the favorable domestic policies, macro sentiment improved, and the overall LME zinc moved up. Overnight, the most active SHFE 2408 zinc contract opened at 24,300 yuan/ton and fell to 24,065 yuan/ton. It finally closed up at 24,245 yuan/ton, up 485 yuan/ton, an increase of 2.04%. The trading volume decreased to 162,000 lots, and the position increased by 2,336 lots to 97,332 lots. Domestic real estate has issued favorable policies again, the macro atmosphere has improved, and the overall zinc price has risen rapidly under the expectation of production cuts by domestic smelters.

Tin
The closing price of the most-traded SHFE tin futures last night was 266,510 yuan/mt, down 70 yuan/mt, with a decline of 0.03%, the highest was 268,000 yuan/mt, and the lowest was 264,160 yuan/mt.
Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 0 yuan/mt over SHFE 2407 tin contract, versus premiums of 0-500 yuan/mt for delivery brands and premiums of 600-800 yuan/mt for Yunxi brand. The price of SHFE tin was weak in the morning session yesterday, and the purchasing intention of downstream companies increased, and the trading was quite active. The SHFE tin warrants decreased by 53 mt to 15,052 mt, while the LME tin inventory increased by 55 mt to 4,780 mt.

Nickel
On June 26, Jinchuan nickel was at a premium of 1,800-2,100 yuan/mt, with an average of 1,950 yuan/mt, a decrease of 100 yuan/mt compared to the previous trading day. Russian nickel was at a discount of 200 yuan/mt to a premium of 100 yuan/mt, with an average discount of 50 yuan/mt, flat compared with the previous trading day. The market fluctuated at recent lows in the morning. The shortage of electro-deposited nickel in the spot market continued, and the premiums and discounts for various brands remained strong. The price of nickel briquette was 132,000-132,700 yuan/mt, a decrease of 450 yuan/mt compared to the previous trading day. The price gap between nickel briquette and nickel sulphate was approximately 1,668 yuan/mt (nickel sulphate prices were 1,668 yuan/mt lower than nickel briquette prices).

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 9 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 9 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 11 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 11 heures
SMM Morning Comment For SHFE Base Metals On June 27 - Shanghai Metals Market (SMM)