SMM Morning Comment For SHFE Base Metals On June 13

Publié: Jun 13, 2024 10:06
Source: SMM
Overnight, LME copper opened at $9,819.5/mt, initially dropping to $9,805.5/mt, then fluctuated upwards, reaching a high of $10,014/mt, before retreating and narrowly fluctuating at the end of the trading session, finally closing at $9,946/mt, with a gain of 1.44%.

SHANGHAI, June 13 (SMM) –

Copper

Overnight, LME copper opened at $9,819.5/mt, initially dropping to $9,805.5/mt, then fluctuated upwards, reaching a high of $10,014/mt, before retreating and narrowly fluctuating at the end of the trading session, finally closing at $9,946/mt, with a gain of 1.44%. Trading volume stood at 19,000 lots, and open interest stood at 330,000 lots. Overnight, the most-traded SHFE copper contract (2407) opened at 80,650 yuan/mt, initially reaching a high of 81,050 yuan/mt, then fluctuated downwards to a low of 80,110 yuan/mt, and narrowly fluctuated at the end of the trading session, finally closing at 80,380 yuan/mt, with a gain of 0.87%. Trading volume stood at 47,000 lots, and open interest stood at 173,000 lots. On the macro front, the non-seasonally adjusted US CPI for May recorded 3.3%, lower than the market expectation of 3.4%, dropping to a three-month low. The US dollar index opened lower, benefiting copper prices. In terms of fundamentals, copper prices dropped slightly yesterday, but downstream purchasing volumes did not increase significantly. This was mainly due to processing enterprises being bearish on the market outlook. After stockpiling for immediate needs, most enterprises remained in a wait-and-see sentiment. If copper prices continue to fall, purchasing volumes may increase. The prices, affected by the US Fed's hawkish signals, may be under downward pressure.

Aluminum

The most-traded SHFE 2407 aluminum contract opened at 20,970 yuan/mt overnight, reaching a high of 20,975 yuan/mt and a low of 20,795 yuan/mt, and closed at 20,855 yuan/mt, up 55 yuan/mt, or 0.26%. The previous trading day, LME aluminum opened at $2,541.5/mt, reached a high of $2,581.5/mt, a low of $2,520/mt, and closed at $2,569/mt, up $25/mt, or 0.98%.

Summary: On the macro level, US Fed interest rate cut expectations increased again, but the timing remains uncertain. On the fundamentals, the arrival of the off-season for consumption together with increasing overseas market frictions led to a decline in orders for aluminum processing enterprises, and the domestic aluminum market supply and demand relationship is gradually weakening. In the short term, aluminum prices are under pressure, and are expected to hover around a high level.

Lead

Futures Market:

Overnight, LME lead opened at $2,170/mt. Lead ingot inventories in the overseas market continued to increase, causing LME lead to shift lower. Later, as the US dollar fell from highs, LME lead bottomed out and climbed but failed to return to $2,200/mt, eventually closing at $2,175/mt, up 0.25%.

Overnight, domestic lead raw material costs rose, and delivery inventory accumulation appeared. The most-traded SHFE lead 2408 contract opened at RMB 18,690/mt, showing strong resilience. It finally closed at RMB 18,705/mt, up 0.43%; open interest stood at 82,517 lots, an increase of 1,544 lots from the previous trading day.

Zinc

Overnight, LME zinc opened at $2,787/mt, initially briefly dipping to $2,782/mt, then investors reduced short positions, and LME zinc fluctuated upwards. Into the night session, the release of CPI data below expectations led to a rapid increase in LME zinc, reaching a high of $2,899/mt, and finally closing up at $2,880/mt, up $93/mt, a gain of 3.36%. Trading volume reduced to 12,110 lots, and open interest reduced by 6,934 lots to 228,000 lots. LME zinc inventory fell by 1,450 mt to 257,900 mt, a decrease of 0.56%. The US released core CPI, with inflation data below expectations, boosting interest rate cut expectations. Non-ferrous metals rebounded, and LME zinc is expected to move narrowly fluctuating.

Overnight, the most-traded SHFE zinc contract (2408) opened at 23,780 yuan/mt, and rose to a high of 23,960 yuan/mt, then shifted lower to around 23,810 yuan/mt. At the end of the trading session, financial pressure continued to enter the market, and SHFE zinc moved upward to around 23,885 yuan/mt, narrowly fluctuating, finally closing up at 23,870 yuan/mt, up 335 yuan/mt, a gain of 1.42%. Trading volume increased to 54,470 lots, and open interest increased by 899 lots to 76,978 lots. SHFE zinc is expected to move narrowly fluctuating.

Tin

Overnight, the most-traded SHFE tin contract closed at 276,500 yuan/mt, an increase of 7,560 yuan/mt or 2.81%. The highest price was 278,420 yuan/mt, and the lowest was 275,100 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-100 yuan/mt over SHFE 2407 tin contract, versus discounts of 200 yuan/mt to premiums of 500 yuan/mt for delivery brands and premiums of 300-800 yuan/mt for Yunxi brand. Tin prices rose yesterday, and transactions in the downstream market were relatively thin. Yesterday, SHFE tin warrants decreased by 78 mt to 15,462 mt, while LME tin inventory decreased by 155 mt to 4,665 mt.

Nickel

On June 12, Jinchuan nickel was at a premium of 2,700-2,800 yuan/mt, with an average of 2,750 yuan/mt, up 150 yuan/mt from the previous trading day. Russian nickel was at a discount of 0-300 yuan/mt, with an average of 150 yuan/mt, flat compared to the previous trading day. In the morning, the market fluctuated at recent lows, leading to a slight recovery in spot market trades. The electro-deposited nickel supply tightness continued, and spot premiums and discounts of various brands moved upward significantly. Nickel briquette prices were 136,180-137,200 yuan/mt, up 500 yuan/mt from the previous trading day. The price spread between nickel briquette and nickel sulphate was about 10,045 yuan/mt (nickel sulphate prices were higher than nickel briquette prices by 10,045 yuan/mt).

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 9 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 9 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 11 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 11 heures
SMM Morning Comment For SHFE Base Metals On June 13 - Shanghai Metals Market (SMM)