SMM Morning Comment For SHFE Base Metals On June 11

Publié: Jun 11, 2024 09:47
Source: SMM
On Monday, SHFE was closed due to the Dragon Boat Festival holiday.

Copper

On Monday, SHFE was closed due to the Dragon Boat Festival holiday. LME copper opened at $9,831/mt, initially rose slightly, then fell back, hitting a low of $9,808/mt during the session. At the end of the trading session, it surged to a high of $9,913/mt and closed at $9,881/mt, with a gain of 0.11%. Trading volume was 56 lots, and open interest was 334,000 lots. On the macro front, US non-farm payrolls data far exceeded expectations, but the unemployment rate in May rose to a two-year high, causing the market to be skeptical about the new non-farm payrolls data and to focus more on the CPI data to be released this week. On the fundamentals side, after the copper price fell, the enthusiasm for procurement by downstream processing enterprises increased to some extent, but since the copper price remained high, a large part of the market was still in a wait-and-see state. Attention will be on whether the copper price can continue to fall. In terms of prices, it is expected that the copper price is unlikely to rise significantly.

Aluminum

Last Friday, SHFE aluminium was closed. On the previous trading day, LME aluminum opened at $2,576/mt, reached a high of $2,586.5/mt, a low of $2,550.5/mt, and closed at $2,582/mt, up $6/mt, an increase of 0.23%.

On the macro front, multiple central banks started cutting interest rates, together with the rising gold prices, providing support for commodity prices. On the fundamentals, domestic aluminium operating capacity increased YoY, while downstream demand remained weak, with only a few sectors showing resilience. The supply-demand relationship on the fundamentals weakened, but the macro support remained strong. It is expected that aluminium prices will fluctuate at high levels.

Lead

Overnight, LME lead opened at $2,202.5/mt. Recently, the US dollar has strengthened, and base metals have generally been suppressed. At the same time, LME lead inventory has gradually accumulated, and LME lead started a fluctuating downward trend, especially during the European session, with the overall center of gravity moving down to a low of $2,180.5/mt, the lowest in nearly a month. Until the end of the trading session, some shorts retreated, and LME lead stopped falling and rebounded, finally closing at $2,209/mt, up 0.78%.

Last Friday, due to the traditional Chinese Dragon Boat Festival, the Shanghai Futures Exchange did not conduct night session trading and was closed for one day on June 10. Normal trading will resume today.

Zinc

Overnight, LME zinc opened at $2,781/mt. At the beginning of the session, longs reduced positions, and LME zinc fell stepwise to a low of $2,737.5/mt. During European trading hours, longs increased positions, and LME zinc fluctuated upwards, moving up to $2,770/mt. Entering the night session, funds continued to enter the market, pushing LME zinc to a high of $2,895/mt, and finally closed up at $2,851/mt, up $79/mt, or 2.85%. Trading volume reduced to 11,921 lots, and open interest decreased by 2,039 lots to 237,000 lots. LME inventory was down 875 tons to 259,950 tons, a decrease of 0.34%. Last Friday, due to the strengthening of the US dollar and stronger-than-expected US employment index, LME zinc fell sharply. Later, due to the turmoil in the Middle East, recent risk aversion sentiment rebounded, and non-ferrous metals generally rose, driving LME zinc to rebound. It is expected that LME zinc will maintain fluctuations today.

Tin

During the early trading session last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 0-300 yuan/mt over SHFE 2407 tin contract, versus discounts of 200 yuan/mt to premiums of 400 yuan/mt for delivery brands and premiums of 300-600 yuan/mt for Yunxi brand. Last Friday, tin prices traded sideways at high levels, and the price increase inhibited the purchasing willingness of downstream companies. Overall, the spot market transactions were relatively flat last Friday.

Nickel

Last week, SHFE nickel prices continued to decline, dropping by 5.86% WoW. Nickel prices hit a low of 140,140 yuan/mt during the week and slightly rebounded to 142,770 yuan/mt on Friday. The decline in nickel prices was mainly due to weakened macro support for non-ferrous metals, with an overall downward trend. Prices of various metals returned to fundamentals, and many bulls retreated from the futures market. Specifically, SHFE nickel prices fell from the range of 150,000 yuan/mt to 140,000 yuan/mt; LME nickel prices dropped from the range of $20,000/mt to $18,000/mt, marking the largest decline among the non-ferrous metals sector. However, the spot market performed contrary to the futures market, with spot prices of various brands moving up. Domestic electro-deposited nickel brands like Huayou and Zhongwei saw quotations at a premium, mainly due to downstream demand being inhibited by high raw material prices for a long time, with some companies making no purchases in the past two months. Therefore, the price drop provided an opportunity for downstream companies to purchase and stock up, making the spot market transactions active. Supply side, although nickel production in May and June is expected to be normal with a slight increase, the large price spread between domestic and overseas markets has led many nickel producers to prefer exports to earn foreign exchange. Some nickel producers hardly traded domestically, with most of their production being exported, resulting in tight supply of domestic nickel plates. Additionally, some companies exhausted their production for export demand and downstream demand resumption, further leaving domestic spot cargoes scarce. On the macro side, the European Central Bank held a monetary policy meeting at its headquarters in Frankfurt, Germany last week, deciding to lower the three major key interest rates in the Eurozone by 25 basis points each. This is the first rate cut by the ECB since it stopped raising rates last October, and may guide the US Fed's decision on rate cuts. Although the US Fed currently maintains hawkish rhetoric, market expectations for no rate hikes have increased and those for rate cuts have returned. In summary, nickel prices currently rely on industry fundamentals, but caution is still needed on the overall impact of macro sentiment on non-ferrous metals. It is expected that nickel prices will fluctuate between 135,000-145,000 yuan/mt this week.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 12 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 14 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 14 heures
SMM Morning Comment For SHFE Base Metals On June 11 - Shanghai Metals Market (SMM)