SMM Morning Comment For SHFE Base Metals On May 23

Publié: May 23, 2024 09:59
Source: SMM
LME copper opened at $10,605/mt overnight, initially reaching a high of $10,605/mt before trending downward.

Copper

LME copper opened at $10,605/mt overnight, initially reaching a high of $10,605/mt before trending downward. By the end of the trading session, it touched a low of $10,363/mt and finally closed at $10,396/mt, with a decline of 3.94%. Trading volume reached 36,000 lots, and open interest was at 344,000 lots. The most-traded SHFE copper contract opened at 84,500 yuan/mt, initially reaching a high of 85,080 yuan/mt before trending downward. During the session, it touched a low of 83,880 yuan/mt and closed at 84,260 yuan/mt. Trading volume reached 131,000 lots, and open interest was at 215,000 lots, with a decline of 2.79%.

On the macro front, the US Fed's May meeting Minutes showed that several officials are willing to tighten policy further if necessary. The long-run neutral interest rate may be higher than previously expected, which is bullish for the US dollar and puts pressure on copper prices. Additionally, copper cathode shipments from China to LME warehouses in Asia arrived, leading some bulls to close their positions and exit the market.

On the fundamentals, copper prices saw a correction yesterday, prompting some downstream buyers to restock at lower prices, although many remained on the sidelines, waiting for further declines. Sellers are still waiting for downstream procurement. According to SMM, inventory at some smelters has reached warehouse limits. If copper prices continue to fall, a slight market recovery is expected. In terms of prices, suppressed demand is exerting upward pressure on copper prices.

Aluminum

Overnight, the most-traded SHFE aluminum contract 2407 opened at 21,110 yuan/mt, reaching a high of 21,220 yuan/mt and a low of 20,945 yuan/mt, and closed at 21,040 yuan/mt, down 335 yuan/mt, a decrease of 1.57%. The previous trading day, LME aluminum opened at $2,710.5/mt, reached a high of $2,749/mt and a low of $2,621/mt, and closed at $2,640.5/mt, down $75/mt, a decrease of 2.76%.

Summary: On the macro front, the US Fed Minutes released last night were hawkish, and intensified overseas trade frictions are putting pressure on demand. On the fundamentals, social inventory grew YoY, and alumina prices recently surged and then retreated. Under the influence of multiple factors, aluminum prices fell sharply overnight, and are expected to continue to fluctuate widely in the short term.

Lead

Overnight, LME lead opened at $2,329/mt and continued its recent upward trend, reaching a high of $2,359/mt, the highest since April 26, 2022. However, after the release of the US Fed meeting minutes, the US dollar index jumped to a one-week high, causing base metals to fall. LME lead also dropped sharply to $2,308/mt and eventually closed at $2,312/mt, down 0.73%.

Overnight, SHFE lead warrant inventory increased by over 1,000 mt. The most-traded SHFE lead contract (2407) opened at 18,685 yuan/mt, but the tight supply of scrap eased, causing SHFE lead to move downwards after a higher opening, hitting a low of 18,455 yuan/mt. By the night session, SHFE lead's decline slightly retraced, eventually closing at 18,520 yuan/mt, down 0.19%. Its open interest reached 80,756 lots, an increase of 1,132 lots from the previous trading day.

Zinc

Overnight, LME zinc opened at $3,123/mt, reaching a high of $3,147/mt. During European trading hours, LME zinc began to decline to around $3,090/mt. In the night session, LME zinc further dropped to a low of $3,052.5/mt. By the end of the trading session, LME zinc was narrowly fluctuating and closed lower at $3,057/mt, down $66/mt or 2.11%. Trading volume reduced to 9,816 lots, and open interest decreased by 716 lots to 242,000 lots. LME zinc inventory decreased by 900 mt to 257,625 mt, a drop of 0.35%. The US Fed's meeting minutes reiterated hawkish comments, dampening rate cut expectations and reducing market bets on multiple rate cuts by the Fed. The US dollar index rebounded, exerting macro pressure on base metals, leading to a decline in LME zinc.

Overnight, the most-traded SHFE zinc contract opened at 24,595 yuan/mt. After the opening, SHFE zinc slowly declined to a low of 24,440 yuan/mt, then began to narrowly fluctuate around the average daily line, reaching a high of 24,665 yuan/mt. It closed lower at 24,535 yuan/mt, down 355 yuan/mt or 1.43%. Trading volume increased to 130,000 lots, and open interest decreased by 4,761 lots to 122,000 lots. Macro sentiment remained unchanged, but high zinc prices suppressed downstream consumption, and fundamentals showed no improvement, leading to a shift lower in SHFE zinc.

Tin

In the night session yesterday, the SHFE 2406 tin contract closed at 273,950 yuan/mt, down 4,920 yuan/mt or 1.76%, with a high of 277,380 yuan/mt and a low of 272,220 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 500-1,000 yuan/mt over SHFE 2406 tin contract, versus discounts of 500 yuan/mt to premiums of 300 yuan/mt for delivery brands, discounts of 300 yuan/mt to premiums of 600 yuan/mt for Yunxi brand, and discounts of 700 yuan/mt for imported brand tin ingots. Tin prices fell during the morning session yesterday, and downstream companies showed little willingness to purchase, with most choosing to wait and see. Overall, the spot market was relatively quiet yesterday.

Nickel

On May 22, Jinchuan nickel was at a premium of 600-800 yuan/mt, with an average of 700 yuan/mt, flat compared to the previous trading day. Russian nickel was at a discount of 300 to 600 yuan/mt, with an average of 450 yuan/mt, up 100 yuan/mt from the previous trading day. Although the market slightly dropped in the morning along with the non-ferrous metals sector, it remained at a high level overall. Downstream demand did not significantly increase, making spot market transactions scarce. Nickel briquette prices were 154,200-154,700 yuan/mt, up 750 yuan/mt from the previous trading day. The price gap between nickel briquette and nickel sulphate was about 8,086.4 yuan/mt (nickel sulphate prices were 8,086.4 yuan/mt lower than nickel briquette prices).

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 12 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 14 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 14 heures