SMM Morning Comment For SHFE Base Metals On May 22

Publié: May 22, 2024 10:05
Source: SMM
LME copper opened at $10,879/mt overnight, initially rising to a high of $10,982/mt before fluctuating downward.

SHANGHAI, May 22 (SMM) –

Copper

LME copper opened at $10,879/mt overnight, initially rising to a high of $10,982/mt before fluctuating downward. Approaching the end of the trading session, it touched a low of $10,787.5/mt and finally closed at $10,822/mt. Trading volume reached 27,000 lots, and open interest reached 342,000 lots, with a decline of 1.25%. The most active SHFE copper contract opened at 87,680 yuan/mt, initially reaching a high of 87,950 yuan/mt before fluctuating downward. Approaching the end of the trading session, it touched a low of 86,170 yuan/mt and finally closed at 86,550 yuan/mt. Trading volume reached 105,000 lots, and open interest reached 221,000 lots, with a decline of 0.69%.

On the macro front, several US Fed officials made hawkish remarks, causing the US dollar index to fluctuate at high levels, which exerted pressure on copper prices. European Central Bank President Lagarde indicated a high likelihood of a rate cut by the ECB in June. Additionally, the SHFE adjusted the margin requirements and price limits for gold and other futures, affecting market sentiment among speculators.

On the fundamentals, downstream purchasing willingness continues to decline. Subsequent releases of warehouse receipts into the spot market are expected to continue impacting spot premiums and discounts. According to SMM, due to recent significant fluctuations in copper prices, processing enterprises have noticeably slowed their procurement pace. In terms of prices, weak consumption will inhibit the continuous rise of copper prices.

Aluminum

The most-traded SHFE aluminum contract 2407 opened at 21,350 yuan/mt overnight, reaching a high of 21,620 yuan/mt and a low of 21,225 yuan/mt, and closed at 21,370 yuan/mt, up 275 yuan/mt or 1.3%. The previous trading day, LME aluminum opened at $2,628/mt, hit a high of $2,765.5/mt and a low of $2,607/mt, and closed at $2,715.5/mt, up $89/mt or 3.39%.

Summary: On the macro front, a rate cut in Europe may be on the horizon, domestic economic data improved, expectations for a real estate recovery strengthened, and the government is determined to boost demand. On the fundamentals, domestic aluminum operating capacity increased, consumption is transitioning to the off-season, and high aluminum prices inhibited downstream purchasing willingness. Aluminum ingot social inventory grew compared to the same period last year. On the cost side, alumina prices recently surged, driving aluminum prices to spike and then fall overnight. In the short term, the macro fundamentals will be intertwined with bullish and bearish factors, and aluminum prices are expected to continue to fluctuate widely.

Lead

Overnight, LME lead opened at $2335/mt. During the Asian session, LME lead was dragged down by the decline in SHFE lead, fluctuating and falling to around $2320/mt. Entering the European session, LME lead inventories continued to decline, and LME lead resumed its upward trend, reaching a high of $2353.5/mt, a new high since May 6, 2022. By the night session, both longs and shorts took profits, causing LME lead to give back some gains, ultimately closing at $2329/mt, down 0.13%, ending a six-day winning streak.

Overnight, SHFE lead warrant inventories continued to decline by over 4,000 tons. The most active SHFE 2407 lead contract opened at 18,730 yuan/mt, reaching a low of 18,495 yuan/mt. It finally closed at 18,565 yuan/mt, down 1.77%, with open interest at 80,303 lots, a decrease of 1,567 lots from the previous trading day.

Zinc

Overnight, LME zinc opened at $3128.5/mt. At the beginning of the session, LME zinc briefly fell to a low of $3083/mt, then rebounded twice to reach a high of $3185/mt. Subsequently, LME zinc quickly declined and fluctuated at a low level towards the end of the trading session, finally closing lower at $3123/mt, down $12/mt or 0.38%. Trading volume reduced to 12,205 lots, and open interest increased by 1,350 lots to 242,000 lots. LME zinc inventory decreased by 325 tons to 258,525 tons, a drop of 0.13%. Although US Fed officials remain cautious about inflation and rate cuts, market bullish sentiment persists.

Overnight, the SHFE 2407 zinc contract opened at 25,000 yuan/mt. After the opening, SHFE zinc briefly rose to a high of 25,190 yuan/mt. As longs reduced their positions, SHFE zinc quickly declined to a low of 24,620 yuan/mt, finally closing up at 24,775 yuan/mt, up 80 yuan/mt or 0.32%. Trading volume reduced to 165,000 lots, and open interest increased by 1,571 lots to 128,000 lots. Recently, macro sentiment has remained warm, and tight supply of ore supports the continuous rise in zinc prices. However, domestic consumption has not shown significant improvement.

Tin

In the night session yesterday, the SHFE tin 2406 contract closed at 277,760 yuan/mt, up 20 yuan/mt or 0.01%, with a high of 283,590 yuan/mt and a low of 276,360 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 500-1,500 yuan/mt for SHFE 2406 tin contract, versus discounts of 300 yuan/mt to premium of 300 yuan/mt for delivery brands and premiums of 300-600 yuan/mt for Yunxi brand. Yesterday morning, after a significant surge in SHFE tin prices, they fell back. Downstream companies' willingness to inquire increased. Overall, the spot market was relatively active yesterday.

Nickel

On May 21, Jinchuan nickel was at a premium of 600-800 yuan/mt, with an average of 700 yuan/mt, down 150 yuan/mt from the previous trading day. Russian nickel was at a discount of 300-800 yuan/mt, with an average of 550 yuan/mt, down 100 yuan/mt from the previous trading day. Although the market slightly dropped along with the non-ferrous metals sector in the morning, it remained at high levels overall. Downstream demand did not see a significant increase, making spot market transactions scarce. Nickel briquette prices were 153,100-154,300 yuan/mt, up 800 yuan/mt from the previous trading day. The price gap between nickel briquette and nickel sulphate was approximately 8,245.5 yuan/mt (nickel sulphate prices were 8,245.5 yuan/mt lower than nickel briquette prices).

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 10 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 12 heures