SMM Morning Comment For SHFE Base Metals On Apr 8

Publié: Apr 8, 2024 10:44
Source: SMM
LME copper prices opened at $9324/mt and closed at $9348/mt overnight, a drop of 0.33%, with the low-end of $9276/mt and the high-end of $9358.5/mt.

SHANGHAI, Apr 8 (SMM) –

Copper

LME copper prices opened at $9324/mt and closed at $9348/mt overnight, a drop of 0.33%, with the low-end of $9276/mt and the high-end of $9358.5/mt. Trading volume was 18,000 lots, and open interest stood at 318,000 lots. SHFE did not conduct night trading yesterday. On the macro level, the number of non-farm payrolls in the United States in March increased far more than expected to 303,000, and the unemployment rate fell slightly to 3.8% in March. After the data was released, the probability of the Federal Reserve cutting interest rates in June was reduced to nearly 50%. The swap market postponed the date of the Federal Reserve's first rate cut from July to September. Federal Reserve officials sounded hawkishly, and the US dollar index closed slightly higher, which weighed on copper prices. In terms of fundamentals, the arrival of imported copper before the Qingming Festival was relatively small, and the smelters entered a maintenance period in April, so the domestic supply may decrease. However, the arrivals of imported copper are expected to increase in the near future, and the total supply is expected to increase slightly this week. In terms of consumption, as copper prices have surged again, downstream stocking before the holiday was on demand. It is expected that there will be a certain demand for replenishment after the holiday, but if copper prices remain at a high level, downstream purchasing sentiment will remain cautious. On the fundamentals, as of April 3, copper inventory across major Chinese markets decreased by 3,200 mt from last Monday to 388,000 mt. On the whole, the postponement of the expected rate cut and the hawkish remarks of the Federal Reserve officials will weigh on the copper price. During the Qingming Festival, LME copper price once again surged to around US$9,350 per ton. It is expected that the SHFE copper price today will be guided higher by the LME copper price.

Aluminum

At last Wednesday’s session, the most-traded SHFE 2405 aluminum contract opened at 19,885 yuan/mt, with its lowest and highest at 19,810 yuan/mt and 19,965 yuan/mt before closing at 19925 yuan/mt, up 115 yuan/mt or 0.58%. LME aluminum opened at $2,435/mt last Friday, with its high and low at $2,455.5/mt and $2,418.5/mt respectively before closing at $2,451/mt, an increase of $6/mt or 0.25%.

Summary: On the macro level, the US non-farm data for March increased beyond expectations, coupled with a decline in the unemployment rate, the strong employment data further delayed the Fed's expectations of a rate cut. In addition, favourable policies such as "trade-in" and "car loan policies" have been introduced in China, and the macro sentiment is bullish. Fundamentally, domestic aluminum supply slowly increased, but the import window remained closed, reducing the impact of the inflow of overseas aluminum ingots. Demand expectations for new energy vehicles and photovoltaics boosted aluminum consumption expectations, and aluminum ingots inventory continued to drop. Aluminum prices are expected to continue to swing on a strong note.

Lead

Last Friday, LME lead opened at $2,132/mt. During the Qingming Festival, overseas lead inventories surged and then fell. Coupled with the continued decline of the US dollar, LME lead prices rose strongly and ran above all moving averages, reaching a high of US$2,147.5 per ton. At last, the contract closed at $2131/mt, down 0.49%.

Last Wednesday the Shanghai Futures Exchange did not conduct night trading due to the Qingming Festival. Today normal trading will resume.

Zinc

Last Wednesday, the number of new non-farm payrolls in the United States in March exceeded expectations; Federal Reserve officials once again made " hawkish " remarks; is Iran's retaliation imminent? The US is on high alert! ; Gaza multi-party negotiations made important progress; CME raised the margin for gold and silver futures; Saudi Aramco raised the price of Arab crude oil sold to Asia in May; He Lifeng held talks with US Treasury Secretary Yellen; the retail price of pure gold jewelry approached 720 yuan/gram; China's central bank increased its gold holdings for 17 consecutive months. Last week, LME zinc had a strong momentum and rose sharply for two consecutive days, reaching a high of US$2,650/ton, an increase of 6.22%. On Friday, LME zinc closed down at US$ 2,622/ton, down US$14/ton, a decline of 0.53%. Trading volume decreased to 16,367 lots, and open interest increased by 6,438 lots to 252,000 lots. LME inventory decreased by 1,775 tons to 260,200 tons, a decrease of 0.678%. The inventory reduction pushed LME zinc up, but the US job growth in March was better than expected, and the weakening expectation of interest rate cuts suppressed the rise of LME zinc. It is expected that LME zinc will remain rangebound at highs today.

Shanghai Futures Exchange was closed last Friday due to the Qingming Festival.

Nickel

SHFE nickel performed well last week. Since March 28, the nickel price has risen for five consecutive days. As of April 3, it grew to 133,450 yuan/mt. Recently, the nickel ore quota is still the center of attention. The nickel ore approval in Indonesia is slower than expected, leading to no new quota in the past two weeks. Indonesian HPM rose by about $3/wmt in April. On this basis, the local nickel ore premium remained high, with the overall tight supply. As the United States, Japan and the Philippines are estimated to start nickel supply cooperation after the meeting on April 11, the market now has begun to worry about its impact on China’s import price of Philippine ore, and whether it could impact the production of domestic smelters. Currently, the market has speculated on whether the Fed will cut interest rates in June. Aditya Bhave’s analyst team at Bank of America released a research report on Tuesday local time, pointing out that considering the base effect of year-on-year core PCE inflation, the best time to cut interest rates this year may be in the first half. Fundamentally, the nickel plate supply continues to increase. Although imports under long-term orders have decreased compared with last year, imported nickel plates still lead to ample supply. In summary, the nickel price is mainly influenced by the industrial chain and macro environment in the short run, rather than refined nickel market fundamentals.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 10 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 11 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 11 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 12 heures