SMM Morning Comment For SHFE Base Metals On February 6

Publié: Feb 6, 2024 10:07
Source: SMM
LME copper prices opened at $8455.5/mt and closed at $8374.5/mt overnight, a drop of 1.06%, with the low-end of $8357/mt and the high-end of $8485/mt.

SHANGHAI, Feb 6 (SMM) –

Copper

LME copper prices opened at $8455.5/mt and closed at $8374.5/mt overnight, a drop of 1.06%, with the low-end of $8357/mt and the high-end of $8485/mt. The trading volume was 189,000 lots, and open interest stood at 290,000 lots. SHFE 2403 copper opened at 68360 yuan/mt overnight and fell to 68000 yuan/mt after rising to 68390 yuan/mt, closing at 68050 yuan/mt, down 0.86%. The trading volume was 27,000 lots, and open interest stood at 133,000 lots. On the macro front, Federal Reserve Chairman Powell’s speech once again hit expectations for an interest rate cut. The possibility of an interest rate cut in March has almost been eliminated. At the same time, U.S. data continues to push the U.S. index higher, and copper prices are under pressure. In terms of fundamentals, from the supply side, suppliers registered a large amount of goods with warehouse receipts last weekend. At the same time, due to the heavy snow in the north, transportation was blocked. The holidays are about to begin, and cross-provincial logistics will also be suspended. The market supply may tend to decrease. In terms of consumption, as downstream holidays continue to take place, logistics operations gradually cease, and market trading sentiment becomes increasingly quiet. Therefore, both the supply and demand fell. In terms of price, on the whole, copper prices are under overall pressure as Federal Reserve Chairman Powell's repeated hawkish remarks. That, coupled with concerns about domestic demand have suppressed the price.

Aluminium

The most-traded SHFE 2403 aluminum contract opened at 18,740 yuan/mt overnight, with its low and high at 18,710 yuan/mt and 18,775 yuan/mt before closing at 18,760 yuan/mt, down 0.29%. LME aluminum opened at $2,236.5/mt on Monday, with its high and low at $2,236.5/mt and $2,203/mt respectively before closing at $2,204.5/mt, down 1.43%.

As CNY is drawing near, inventory grew amid subdued consumption. Transactions in the spot market was sluggish, in line with market expectations. From a macro perspective, expectations for an interest rate cut by the Federal Reserve in March fell. The Chinese government continued to stress efforts to boost market confidence. In the short term, aluminium prices are expected to move rangebound. However, there were rumours that Yunnan may relax energy efficiency management after CNY. SMM will keep a close eye on its progress and other unexpected news from the macro perspective.

Lead

LME lead opened at $2140/mt and fell during the Asian trading hours yesterday. During the European trading hours, LME lead briefly hit the lowest of $2106/mt, closing down 1.43% at $2106/mt overnight.

The most-traded SHFE 2403 lead contract opened at 16205 yuan/mt and fell to the lowest point at 16125 yuan/mt. SHFE lead rose slightly and finally closed at 16150 mt, down 45 yuan/mt or 0.28% overnight.

Zinc

LME zinc opened at $2465/mt yesterday evening, and hit a high of $2465.5/mt before falling back to $2416/mt, and closed at $2425/mt, a decrease of $26.5/mt or 1.08%. Trading volume decreased to 9888 lots, and open interest grew 2021 lots to 224,000 lots. LME zinc inventory decreased by 1050 mt or 0.53% to 197275 mt. The owner of Russia's Ozernoye zinc mine said that the mine has postponed the start-up of zinc concentrate until at least the third quarter of this year. The delay in production has intensified the market's expectations for long-term shortages at the mine end. However, the U.S. ISM service industry index rose to 53.4 in January. , hitting a four-month high, strong economic data continues to dampen market expectations for interest rate cuts by the Federal Reserve, and macro bearish sentiment has revived. Grupo Mexico's fourth quarter report for 2023 revealed that its Buenavista zinc project will begin operations in the first quarter of 2024.

The most active SHFE 2403 zinc contract opened at 20520 yuan/mt and fell 15 yuan/mt or 0.07% to close at 20520 yuan/mt trading with the high-end of 20585 yuan/mt and the low-end of 20485 yuan/mt. Trading volumes decreased to 26821 lots and open interest grew 706 lots to 80131 lots. Inventories in seven SMM markets in China recorded 89,900 tons, an increase of 7,500 tons from the previous week. Domestic social warehouses continued to accumulate, and the support for zinc prices from inventories weakened. Shanghai zinc was weak and fluctuated.

Tin

SHFE 2403 tin contract fell to 207,470 yuan/mt overnight, down 2.31%.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-500 yuan/mt against SHFE 2403 tin contract, versus discounts of 200 yuan/mt to premiums of 600 yuan/mt for delivery brands, premiums of 300-800 yuan/mt for Yunxi brand, and discounts of 500-1,000 yuan/mt for imported brand tin ingots. Yesterday, tin prices continued to fall. With CNY drawing near, downstream purchasing basically ended and traders also took CNY holidays.

Nickel

Overnight, the most-traded SHFE nickel contract opened at 126870 yuan/mt, and closed at 124860 yuan/mt, down 1570 yuan/mt. Trading volume rose 70756 lots, and open interest increased by 5982 lots. On the macro front, the Federal Reserve's interest rate meeting announced on the evening of February 1st showed that the interest rate range for February would remain unchanged. Powell said that expectations for an interest rate cut during the year still exist, but there is no possibility of an interest rate cut in the short term. From a fundamental point of view, transaction in the spot market has cooled down as downstream pre-holiday stocking has basically ended. With new arrivals, the supply of pure nickel has increased. Nickel price is expected to swing on a soft note.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 11 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 11 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 11 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 11 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 13 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 13 heures