SMM Morning Comment For SHFE Base Metals January 26

Publié: Jan 26, 2024 09:48
Source: SMM
LME copper prices opened at $8557.5/mt and closed at $8547.5/mt in narrow range, a drop of 0.23%, with the low-end of $8529/mt and the high-end of $8599/mt.

SHANGHAI, January 26 (SMM) –
Copper
LME copper prices opened at $8557.5/mt and closed at $8547.5/mt in narrow range, a drop of 0.23%, with the low-end of $8529/mt and the high-end of $8599/mt. The trading volume was 22,000 lots, and open interest stood at 279,000 lots. The most active SHFE 2403 copper contract prices opened at 69050 yuan/mt and finished at 69120 yuan/mt overnight, with the high-end of 69130 yuan/mt and the low-end of 68920 yuan/mt, up 0.36%. Trading volume was 27,000 lots, and open interest stood at 152,000 lots. On the macro front, U.S. GDP in the fourth quarter exceeded expectations by 3.3%, and the number of initial jobless claims in the week of January 20 hit a two-month high. The market increased its bets on the Federal Reserve to cut interest rates. At the same time, crude oil rose due to geopolitical influences, boosting copper price. In terms of fundamentals, copper prices unexpectedly surged higher. Although the premium was lowered, downstream stocking enthusiasm was suppressed by fear of high prices and consumption was lukewarm. If copper prices remain high, consumption recovery is expected to be low. The weakening of overall consumption coupled with the continued impact of low-priced imported copper means supply is expected to remain relatively loose. Taken together, the impact of the People's Bank of China's RRR cut continues, and the market has increased expectations for the Federal Reserve's interest rate cut coupled with geopolitical influences. Copper prices are expected to remain high.
Aluminum
Overnight, the most-traded SHFE 2403 aluminum contract opened at 18,925 yuan/mt, with its lowest and highest at 18,875 yuan/mt and 18,995 yuan/mt before closing at 18,990 yuan/mt, up 125 yuan/mt or 0.66%. LME aluminum opened at $2,222.5/mt yesterday, with its high and low at $2,244/mt and $2,205/mt respectively before closing at $2,232/mt, up $10/mt or 0.45%.
On the macro front, the US Markit PMI data for January exceeded expectations. The data demonstrated the resilience of the US economy, and expectations for interest rate cuts once again cooled significantly. In China, the macroeconomic environment was positive. The People’s Bank of China announced RRR cuts and will continue to keep a close eye on development of real estate, boosting domestic market sentiment. In terms of fundamentals, as CNY is drawing near, downstream consumption slowed down, but inventories remained at low levels driven by a high aluminum liquid ratio and downstream stockpiling before the CNY holiday. SMM predicts that the total domestic inventory accumulation during the 2024 CNY holidays may be lower than levels for the same period of previous years. In the short term, amid low inventory and no obvious imbalance between supply and demand, aluminum prices may fluctuate along with macro sentiment before CNY holidays.
Lead
LME Lead Prices Fell to $2123/mt Overnight
LME lead prices opened at $2150.5/mt and closed at $2145/mt, down 0.26%, with the low-end of $2123.5/mt and the high-end of $2168/mt.
The most active SHFE 2403 lead contract prices opened at 16335 yuan/mt last evening, and closed at 16340 yuan/mt, a gain of 0.18%, with the high-end of 16410 yuan/mt and the low-end of 16270 yuan/mt.
Zinc
SHFE Zinc has been supported and moved upward [SMM Zinc Morning Comment]
Overnight, LME zinc prices opened at US$2,581/ton and reached a low of US$2,567/ton during the period. During the European trading session, LME zinc prices moved up and hit a high of US$2,605.5/ton, finally closing at US$2,587/ton, up US$0.5/ton, or 0.02%. The trading volume decreased by 3,005 lots to 9,137 lots, and the open interest decreased by 4,156 lots to 216,000 lots. LME zinc inventory fell by 2,100 tons to 193,475 tons, a decrease of 1.07%. The initial value of the annualized real GDP in the United States in the fourth quarter exceeded expectations and recorded 3.3%. Economic data are relatively strong and inflationary pressures have eased, driving the U.S. dollar index to rise, putting pressure on LME zinc. However, LME inventories have continued to fall to recent lows. With fundamental support, LME zinc moved rangebound.
The most interest-traded SHFE 2403 zinc contract opened at 21440 yuan/mt last evening and settled at 21440 yuan/mt, up 95 yuan/mt or 0.45%. Trading volume decreased 59492 to 42951 lots, and open interest gained by 872 lots to 90,400 lots. Favourable policies, tight ore supply and the closed import window for refined zinc bolstered SHFE zinc prices.
Tin
SHFE 2402 tin contract rose slightly to 222,620 yuan/mt before closing at 221,860 yuan/mt overnight, up 0.83%.
Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 200-800 yuan/mt against SHFE 2402 tin contract, versus discounts of 300 yuan/mt to premiums of 600 yuan/mt for delivery brands, premiums of 300-1,000 yuan/mt for Yunxi brand, and discounts of 1000-1300 yuan/mt for imported brand tin ingots. Tin prices inched lower and then rebounded yesterday, and traders reported that the downstream customers were cautious about placing orders.
Nickel
Overnight, the most-traded SHFE nickel contract opened at 130370 yuan/mt, and closed at 129720 yuan/mt, down 60 yuan/mt. Trading volume rose 7374 lots, and open interest increased by 908 lots. The inflation indicator favored by the Federal Reserve will be released on Friday, and market expectations for a March interest rate cut have "cooled". In addition, the Bank of Japan stated that it will continue to maintain ultra-loose monetary policy. From a fundamental point of view, nickel price in spot market rose due to the impact of rising SHFE nickel price, and the transaction sentiment in the spot market has cooled down. With the arrival of some pure nickel, the supply has increased. Nickel price is expected to swing on a soft note.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 11 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 11 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 14 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 14 heures