Aluminium rod supply shifted to a surplus in December on production increase

Publié: Jan 23, 2024 10:45 (GMT+8)
Source: SMM
According to the SMM analysis team, the aluminium rod supply was largely stable in December.

According to the SMM analysis team, the aluminium rod supply was largely stable in December. In December 2023, the existing domestic aluminium rod production capacity was 7.22 million mt. In December (31 days), the domestic aluminium rod production totalled 382,000 mt, up 0.26% MoM. The operating rate of aluminium rod was 63.5% in December, up 0.2% MoM from 63.3% in November. The annual production of aluminium rod was 4.1935 million mt in 2023, up 10% MoM. Due to high conversion margins and resilient downstream demand, domestic aluminium rod production and operating rates increased slightly in December. According to SMM’s research, new capacity will be commissioned in Shandong in the near future. Affected by intensifying competition and shrinking profits in the domestic aluminium rod market, SMM predicts that the supply of aluminium rods will be largely stable.

On the demand, affected by falling temperatures, delivery slowdown, and weakening willingness of companies to produce due to rebound in aluminium prices, the operating rates of downstream aluminium wire and cable companies continued to decline in December, down by 1.7 points MoM to 47.83%. In terms of company types, as leading companies have hedging positions, they were immune to rebound in aluminium prices. They reported abundant orders and shipments remained stable based on the orders. However, the companies are keen on increasing their cash flows at the end of the year, dragging down the operating rates; in terms of small and medium-sized enterprises, they usually purchase on the dip and hardly make purchases, thus their operating rates were hit hard by aluminium prices. The aluminium base prices rose significantly in mid-December. The average price of SMM A00 aluminium in December increased by 271 yuan MoM to 19,065 yuan/mt, with the operating rates of small and medium-sized enterprises being weak due to rising costs. In terms of regions, the operating rates in Jiangsu and Shandong are generally stable. Demand from enterprises in Henan and Hebei weakened, resulting in muted trades in the market.

In terms of conversion margins of aluminium rod in 2023, the average ex-factory conversion margins for aluminium rods in Shandong was 443 yuan/mt, down by 89 yuan/mt YoY; the average price in Henan was 467 yuan/mt in 2023, down by 9 yuan/mt YoY; the average price in Inner Mongolia stood at 304 yuan/mt in 2023, down by 9 yuan/mt YoY; the average price in Guangdong stood at 619 yuan/mt in 2023, up by 165 yuan/mt YoY.

In terms of conversion margins during the month, aluminium prices continued to decline in early December 2023, and then as aluminium social inventories fell below 500,000 mt, aluminium prices began to rebound. In early-to-mid December, aluminium rod manufacturers maintained firm quotations, and conversion margins remained high. The demands weakened in late December, dragging down conversion margins. During the month, the average ex-factory conversion margins for aluminium rods in Shandong was 473 yuan/mt, down by 62 yuan/mt MoM; Local companies reported that the production schedule was alleviated as the supply shifted to a surplus; in Henan, the average price was 488 yuan/mt, down by 47 yuan/mt MoM. Some local companies shut down due to environmental inspections, which will be gradually recovered in a week; the average ex-factory conversion margins for aluminium rod in Inner Mongolia was 328 yuan/mt, down by 107 yuan/mt MoM. Affected by environmental protection inspections and heavy snowfall in Hebei, downstream demand weakened significantly, resulting in muted trades. The average transaction price in Guangdong stood at 628 yuan/mt, down by 72 yuan/mt MoM. Recently, the aluminium rod market shifted into oversupply, dragging down the conversion margins of aluminium rod. In January, some wire and cable factories may maintain certain operating rates to increase the finished products inventory so as to ease the delivery pressure after the CNY holidays. However, the downstream demand is still weak, and companies are keen on increasing their cash flows at the end of the year. SMM predicts that aluminium rods conversion margins may remain weak in January.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
il y a 7 heures
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
Lire la suite
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
Le 20 septembre, le laminoir dégrossisseur à tôles fortes du projet de fabrication intelligente de nouveaux matériaux à base d'aluminium d'une capacité de 720 000 tonnes par an de Henan Yirui New Materials Technology Co., Ltd. a été officiellement mis en service. Avec un investissement total de 1,5 milliard de yuans, le projet exploite le site industriel existant pour construire une ligne de laminage à chaud continu « 1+4 » de niveau international, appuyée par des équipements de transformation de l'aluminium de pointe tels que des fours de réchauffage à longerons poussants. Le projet a également mis en place un système d'Internet industriel des objets capable de surveiller en temps réel et de réguler dynamiquement les paramètres de production essentiels tels que la force de laminage et la température, garantissant ainsi efficacement la stabilité de la qualité des produits en aluminium haut de gamme et augmentant continuellement la part de marché des produits à forte valeur ajoutée.
il y a 7 heures
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
il y a 7 heures
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
Lire la suite
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
La Guinée prévoit d'étendre sa coopération avec Glencore au raffinage de l'alumine, à l'énergie, à l'or et aux métaux de base, afin d'accroître les revenus miniers, de promouvoir la transformation locale et l'industrialisation des ressources minérales, et de renforcer la coopération avec les marchés et les entreprises minières internationales en Chine, au Moyen-Orient et au-delà.
il y a 7 heures
Dingfeng Aluminium lance la phase II, visant une capacité annuelle de 200 000 tonnes au Cambodge
il y a 7 heures
Dingfeng Aluminium lance la phase II, visant une capacité annuelle de 200 000 tonnes au Cambodge
Lire la suite
Dingfeng Aluminium lance la phase II, visant une capacité annuelle de 200 000 tonnes au Cambodge
Dingfeng Aluminium lance la phase II, visant une capacité annuelle de 200 000 tonnes au Cambodge
Le 21 septembre, la cérémonie de pose de la première pierre de la phase II (projet A3) de Dingfeng Aluminum Manufacturing (Cambodia) Co., Ltd., filiale du groupe Dihang, a eu lieu. Située dans la zone économique spéciale de la route n° 6, dans la province de Kampong Cham, au Cambodge, Dingfeng Aluminum est principalement engagée dans la R&D et la production de barres d'aluminium allié haut de gamme, de profilés d'aluminium haut de gamme et de produits destinés aux véhicules à énergie nouvelle, avec un ensemble complet de procédés et d'équipements de production couvrant la fusion et la coulée, l'extrusion, l'anodisation, l'usinage profond, l'usinage de précision et le traitement de surface. Une fois la phase II pleinement opérationnelle, la capacité de production annuelle atteindra 200 000 tonnes, pour une valeur de production annuelle pouvant atteindre 700 millions de dollars américains. La phase II (projet A3) prévoit un atelier de transformation pour véhicules à énergie nouvelle de 24 340 m² (bâtiment en structure acier d'un seul étage), un atelier d'extrusion de 15 291 m², ainsi que des installations annexes telles qu'un immeuble de bureaux, un poste de garde et un local de distribution électrique.
il y a 7 heures