SMM Morning Comment For SHFE Base Metals January 4

Publié: Jan 4, 2024 09:54
Source: SMM
LME copper prices opened at $8530/mt and closed at $8515/mt in overnight trading, a drop of 0.21%, with the low-end of $8455/mt and the high-end of $8532/mt.

SHANGHAI, January 4 (SMM) –
Copper
LME copper prices opened at $8530/mt and closed at $8515/mt in overnight trading, a drop of 0.21%, with the low-end of $8455/mt and the high-end of $8532/mt. Trading volume was 22,000 lots, and open interest stood at 279,000 lots. The most active SHFE 2402 copper contract prices opened at 68350 yuan/mt and finished at 68600 yuan/mt overnight, with the high-end of 68680 yuan/mt and the low-end of 68220 yuan/mt, down 0.03%. Trading volume was 30,000 lots, and open interest stood at 133,000 lots. On the macro front, the minutes of the Federal Reserve meeting were overall dovish, but they downplayed the sense of urgency to cut interest rates compared to before. The market expects that interest rates will remain at their peak for longer. The U.S. ISM manufacturing PMI picked up in December, and the U.S. dollar index also continued to rise, which generally has a suppressive effect on copper prices. In terms of fundamentals, from the supply side, a large amount of imported copper flowed into the domestic trade market yesterday, driving premiums lower. However, actual trading volume was low, consumption of inventories was weak, and supply is expected to remain relatively ample. In terms of consumption, due to the large fluctuations in premiums and the fact that downstream consumption has not yet recovered, the supply is relatively ample. The downstream generally remained bearish and cautious, and only purchased on demand. The actual trading situation was lacklustre. The copper prices will meet resistance as the US dollar index rose.
Aluminum
Overnight, the most-traded SHFE 2402 aluminum contract opened at 19,330 yuan/mt, with low and high at 19,260 yuan/mt and 19,350 yuan/mt before closing at 19,350 yuan/mt, up 10 yuan/mt or 0.05%. LME aluminum opened at $2,326/mt yesterday, with its high and low at $2,337.5/mt and $2,287/mt respectively before closing at $2,306/mt, a decrease of $19.5/mt or 0.84%.
On the macro level, the minutes of the December meeting released by the Federal Reserve indicated that the U.S. interest rate hike cycle may have already ended. Domestic macro environment remained positive, boosting market confidence. In terms of fundamentals, alumina futures prices fell back from highs, thus the cost crisis of aluminum is expected to ease. However, there are still uncertainties on the overseas bauxite market, and the operating rates at major aluminum processing companies needs to be observed. Short-term aluminum prices may fluctuate at the current price level, and we need to pay close attention to the pace of the Federal Reserve's interest rate cuts and the latest changes in raw materials.
Lead
LME lead opened at $2059.5/mt last evening and fell by 0.99% to close at $2045/mt, after hitting the lowest point at $2043.5/mt and the highest point at $2070/mt.
The most active SHFE 2402 lead contract prices opened at 15995 yuan/mt last evening, and closed at 15965 yuan/mt, a drop of 0.09%, with the high-end of 16020 yuan/mt and the low-end of 15930 yuan/mt.
Zinc
Overnight, LME zinc prices opened at US$2,621/ton and touched a high of US$2,622/ton. Entering the night trading session, LME zinc prices moved rapidly downwards and tested as low as 2,562 US dollars/ton, and finally closed down at 2,590 US dollars/ton, down 22 US dollars/ton, or 0.84%. The trading volume decreased by 1,270 lots to 9,084 lots, and the open interest increased by 1,672 lots to 202,000 lots. LME inventory increased by 100 tons to 223325 tons, an increase of 0.04%. The minutes of the Federal Reserve meeting showed that the urgency of cutting interest rates was downplayed, and Federal Reserve officials said that a soft landing of the economy was more likely. The U.S. dollar index rose again.
Overnight, the most-traded SHFE 2402 zinc contract opened at 21505 yuan/mt and touched a low of 21395 yuan/mt and a high of 21545 yuan/mt before closing at 21475 yuan/mt, down 75 yuan/mt or 0.35%. Trading volume decreased 45926 to 39,900 lots, and open interest decreased by 3273 lots to 82,500 lots. Despite the ending of production restrictions in many regions, spot trading was weak, weakening fundamental support for zinc prices.
Tin
Tin SHFE 2402 tin contract rose to 212950 yuan/mt overnight, and closed at 212410 yuan/mt, up 1.03%.
Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 300-600 yuan/mt compared to SHFE 2402 tin contract, versus premiums of 0-700 yuan/mt for delivery brands, premiums of 1000-1100 yuan/mt for Yunxi brand, and discounts of 900-1300 yuan/mt imported brand tin ingots. Tin prices rose slightly in early trading yesterday and then fell back. Traders reported that downstream companies' purchasing intentions were still sluggish, and they still took a wait-and-see attitude towards the current relatively high tin prices.
Nickel
Overnight, the most-traded SHFE nickel contract opened at 128010 yuan/mt, and closed at 128090 yuan/mt, up 580 yuan/mt. Trading volume rose 220,000 lots, and open interest dcreased by 2356 lots. From a macro perspective, the conflict between the US military and the Houthi armed forces broke out on December 31, 2023, and the Red Sea crisis escalated again, which may further boost market risk aversion. From a fundamental point of view, LME nickel inventory continued to rise, with the increase coming from warehouses in Asia. At the same time, SHFE nickel warrants also climbed, with an increase of 514 mt yesterday. Nickel price is expected to move rangebound.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 9 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 9 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 11 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 11 heures