SMM Morning Comment For SHFE Base Metals December 5

Publié: Dec 5, 2023 09:58
Source: SMM
LME copper prices opened at $8497/mt and closed at $8427/mt in overnight trading, a drop of 2.3%, with the low-end of $8427/mt and the high-end of $8515/mt.

SHANGHAI, December 5(SMM) –
Copper
LME copper prices opened at $8497/mt and closed at $8427/mt in overnight trading, a drop of 2.3%, with the low-end of $8427/mt and the high-end of $8515/mt. Trading volume was 26,000 lots, and open interest stood at 279,000 lots. The most active SHFE 2401 copper contract prices opened at 68380 yuan/mt and closed at 68190 yuan/mt last evening, down 0.9%, with the high-end of 68560 yuan/mt and the low-end of 68070 yuan/mt. Trading volumes stood at 34,000 lots and open interest stood at 167,000 lots. On the macro front, U.S. factory orders fell by 3.6% on a monthly basis in October, which was larger than the expected 2.6% drop and was the lowest level since April 2020. A report released by the New York Fed on Monday showed that its multi-core trend inflation measure (MCT) was at 2.6% in October, down from 2.88% in September. In addition, First Quantum reached an agreement with the Zambian Mining Company to accelerate the development of the Fishtie copper mine. On Fundamentals, as of Monday December 4, SMM copper inventories across major Chinese markets stood at 54,000 mt, down 900 mt from last Friday and 53,400 mt lower than the same period last year. Neither imported copper nor domestic copper arrived in large quantities in East China, causing inventories to decline. In South China, as copper processing companies that had suspended production previously resumed production one after another, the recovery in demand also led to a decline in inventories in South China. In terms of consumption, high market prices coupled with high premiums still suppress downstream demand. Due to the influence of low inventory, copper prices will rebound in the near future.
Aluminum
Overnight, the most-traded SHFE 2401 aluminum contract opened at 18560 yuan/mt, with its lowest and highest at 18380 yuan/mt and 18575 yuan/mt before closing at 18475 yuan/mt, down 170 yuan/mt or 0.91%. LME aluminum opened at $2,204/mt on Monday, with its high and low at $2,213/mt and $2,174/mt respectively before closing at $2,184/mt, down $16/mt or 0.73%.
Federal Reserve Chairman Powell sounded cautious about further interest rate action in his speech on Friday, saying the risks of under- or over-tightening were now more balanced. The market believes that his speech is dovish and that the Fed may have completed raising interest rates. Domestic macroeconomic data are weakening, and the manufacturing PMI index has been below 50% continuously. Market pins hopes on release of domestic favorable policies at the end of the year, but it will still take time to transmit to the manufacturing industry and other sectors. In terms of fundamentals, there are no further changes expected on the supply side in the short term, and market trading logic generally focuses on the resilience of consumer demand in the off-season. The short-term macro atmosphere is weak and the consumption off-season has a greater impact. Aluminum prices may remain weak and fluctuate. At the same time, inventory continues to be reduced, which has given aluminum prices certain support.
Lead
LME lead opened at $2128/mt and rose during the Asian trading hours yesterday, rising to $2131.5/mt during the European trading hours. It finally closed at $2093/mt, down $33.5/mt or 1.58%, falling for 11 consecutive days.
The most-traded SHFE 2401 lead contract opened at 15700 yuan/mt and fell 70 yuan/mt or 0.45% to close at 15630 yuan/mt last evening, briefly hitting the lowest point at 15600 yuan/mt and the highest point at 15770 yuan/mt.
zinc
Overnight, LME zinc opened at US$2,512/ton and touched a high of US$2,523/ton. During the European trading session, the LME zinc fluctuated all the way down, reaching a low of US$2,437/ton at the end of the day, and finally closed down at US$2,438.5/ton, down $81/ton, or 3.21%. Trading volume decreased by 1,256 lots to 9,589 lots, and open interest decreased by 1,318 lots to 201,000 lots. LME stocks decreased by 1,575 tons to 222,700 tons, a decrease of 0.70%. The U.S. dollar index rebounded. U.S. factory orders in October was lower than expected and recorded -3.6%, the lowest level since April 2020.
Overnight, the most-traded SHFE 2401 zinc contract opened at 20680 yuan/mt and touched a high of 20745 yuan/mt before closing at 20555 yuan/mt, down 285 yuan/mt or 1.37%. Trading volume decreased 47784 to 44,300 lots, and open interest increased by 3460 lots to 89,800 lots.
Tin
vernight, SHFE 2401 tin contract rose to 203,130 yuan/mt and then fell slightly, closing at 201,790 yuan/mt, up 1.07%.
During yesterday's morning trading, the price premiums and discounts quoted by trading companies for various domestic tin ingot brands had little change from last Friday. Small brand tin ingots were offered at around premiums of 200-400 yuan/mt. Delivery brands were offered at premiums of 500-800 yuan/mt over SHFE 2401 tin contract. The Yunnan tin brands were offered at premiums of 1,000-1,100 yuan/mt over SHFE 2401 tin contract. Imported tin brands’ spots were offered at discounts of 600-500 yuan/mt. Generally speaking, tin prices rose slightly during the session and then fell back. The spot market transactions yesterday showed a differentiated trend, with a small number of companies seeing relatively hot transactions.
Nickel
On December 4th, the most-traded SHFE nickel contract opened at 131,380 yuan/mt, and closed at 128,460 yuan/mt, down 920 yuan/mt. Trading volume rose 3,031 lots, and open interest increased by 1,188 lots. From a macro perspective, the Federal Reserve continues to be dovish and a number of data reflect the economic decline in the U.S. market. Market expectations for the Federal Reserve to cut interest rates have increased, and commodities are bullish. From a fundamental perspective, pure nickel social inventories still show a trend of accumulation, and downstream orders have not picked up significantly yet, reflecting the poor transaction in the market yesterday. Nickel price is expected to decline and then move rangebound.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 10 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 12 heures