SMM Morning Comment For SHFE Base Metals November 1

Publié: Nov 1, 2023 09:55
Source: SMM
LME copper prices opened at $8130/mt and closed at $8119/mt in overnight trading, a drop of 0.24%, with the low-end of $8080/mt and the high-end of $8159/mt.
SHANGHAI, November 1 (SMM) –
Copper

SMM Copper morning comment

LME copper prices opened at $8130/mt and closed at $8119/mt in overnight trading, a drop of 0.24%, with the low-end of $8080/mt and the high-end of $8159/mt. Trading volume was 16,000 lots, and open interest stood at 269,000 lots. The most active SHFE 2312 copper contract prices opened at 67330 yuan/mt and closed at 67330 yuan/mt last evening, down 0.15%, with the high-end of 67430 yuan/mt and the low-end of 67150 yuan/mt. Trading volumes stood at 22,000 lots and open interest stood at 155,000 lots. On the macro front, the U.S. labor cost index in the third quarter recorded 1.1%, higher than expected and the previous value (1.00%), indicating that U.S. employment costs unexpectedly accelerated in the third quarter, exacerbating the market's concern that a strong labor market may increase inflation rate to above target. In addition, the Conference Board's consumer confidence index fell for three consecutive months. In terms of fundamentals, spot resources in East China are still not abundant. Spot premiums and discounts continued to rise yesterday. However, due to the surge in market prices, downstream purchases were as needed. Inventories in South China increased slightly yesterday, mainly due to the relatively high price of copper and weaker downstream procurement demand. But sellers were not willing to lower premiums and discounts. In terms of consumption, copper prices rose, but spot resources were not sufficient. It is expected that most companies will maintain on-demand purchases. The copper prices will meet resistance from expectations of high US dollar.

Aluminum

SMM Aluminum Morning Comment

The most-traded SHFE 2312 aluminum contract opened at 19215 yuan/mt in last night trading session, with the lowest and highest at 19130 yuan/mt and 19225 yuan/mt before closing at 19165 yuan/mt, down 50 yuan/mt, or 0.26%. Three-month LME aluminum opened at $2261.5/mt last evening and closed at $2246/mt, a decline of $17.5/mt or 0.77%.

There is still great uncertainty in overseas macroeconomics. U.S. economic data shows that the U.S. economy is resilient. The U.S. dollar index fluctuates at a high level, suppressing commodities. China will issue an additional one trillion yuan of local government bonds to boost the economic market. In terms of fundamentals, some aluminum billet factories have recently reduced production, and ingot casting volume has increased month-on-month. Yunnan's production reduction expectations are basically confirmed, the short-term domestic aluminum supply side mainly remain at high levels, and the imports did not decrease. Downstream consumption is weakening, and social inventory destocking of aluminum ingots is not smooth. The inventory is still at a high level since half a year. In the short term, aluminum prices may remain rangebound. We will pay attention to domestic aluminum inventories and downstream consumption in the future.

Lead

SMM Lead Morning Comment

SHANGHAI, Nov 1 (SMM) -

LME lead opened at $2116.5/mt and stabilized during the Asian trading hours. During the European trading hours, LME lead briefly hit the highest point at $2120/mt and the lowest of $2028/mt, closing down 1.54% at $2081.5/mt overnight.

The most traded SHFE 2312 lead contract opened at 16290 yuan/mt and fell 0.28% to 16250 yuan/mt, after briefly hitting the highest point at 16380 yuan/mt and the lowest point at 16230 yuan/mt.

Zinc

SMM Zinc Morning Comment

Overnight, LME zinc opened at $2,463/mt. During the European trading session, LME zinc moved up and reached a high of $2,471/mt. In the night session, LME zinc tested as low as $2,417/mt. It finally closed down at $2,417.5/mt, down $49/mt, or 1.99%. The trading volume increased by 1,181 lots to 7,149 lots. Open interest decreased by 1,917 lots to 198,000 lots. LME zinc inventories increased by 2,926 tons to 84,525 tons, an increase of 3.58%. The CPI in the Eurozone in October was lower than expected and recorded 0.1. European inflation data cooled down and GDP shrank month-on-month.

Overnight, the most-traded SHFE 2312 zinc contract opened at 21085 yuan/mt and fell to 20960 yuan/mt before closing at 20975 yuan/mt, down 185 yuan/mt or 0.87%. Trading volume decreased 79493 to 57,800 lots, and open interest increased by 3354 lots to 83,000 lots.

Tin

SMM Tin Morning Comment

The price of the most active SHFE 2312 tin contract fell rapidly after opening in overnight trading session, reaching a low of 205600 yuan/mt. The prices then fluctuated rangebound and finally closed at 206120 yuan/mt last evening, a decline of 3.23%.

Nickel

SMM Nickel Morning Comment

On October 31 evening, the most active SHFE nickel contract prices opened at 147300 yuan/mt and closed at 143580 yuan/mt, a decrease of 2890 yuan/mt from the closing price of the previous trading day. The trading volume increased by 64788 lots, and the open interest increased by 12735 lots. The decrease in trading volume shows that longs were more rational in closing positions. Therefore, the prices dropped moderately, and the probability of a sustained decline is high. On the macro front, the current market expectations for an interest rate hike in November continue to cool down, and the U.S. dollar index has remained high recently. The market needs to pay attention to the Federal Reserve interest rate decision this Thursday. From a fundamental perspective, the trend of pure nickel inventory accumulation remains unchanged, downstream demand has not yet improved, and spot market transactions were still weak. In summary, it is expected that the nickel price may fluctuate rangebound in the near term.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 9 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 9 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 10 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 12 heures
SMM Morning Comment For SHFE Base Metals November 1 - Shanghai Metals Market (SMM)