SMM Morning Comment For SHFE Base Metals September 20

Publié: Sep 20, 2023 10:05
Source: SMM
LME copper prices opened at $8268.5/mt and closed at $8309.5/mt in overnight trading, a decline of 0.51%, with the low-end of $8268.5/mt and the high-end of $8333.5/mt.

SHANGHAI, Sep 20 (SMM) –

Copper

LME copper prices opened at $8268.5/mt and closed at $8309.5/mt in overnight trading, a decline of 0.51%, with the low-end of $8268.5/mt and the high-end of $8333.5/mt. Trading volume was 18,000 lots, and open interest stood at 260,000 lots. The most active SHFE 2310 copper contract prices opened at 68660 yuan/mt and closed at 68740 yuan/mt last evening, a drop of 0.35%, with the high-end of 68900 yuan/mt and the low-end of 68600 yuan/mt. Trading volume was 24,000 lots, and open interest stood at 139,000 lots. On the macro front, the Federal Reserve is widely expected to keep interest rates steady on Wednesday. Still, impact from rising oil prices put the Fed in a difficult position because they drive up inflation while dampening economic growth. In addition, U.S. housing starts fell to their lowest level since June 2020, highlighting the toll of declining housing affordability. In terms of fundamentals, spot quotes fell in East China yesterday. Even though the copper prices shifted downwards and downstream purchasing intentions recovered, the oversupply put pressure on premiums; inventories in South China also increased for five consecutive days, downstream demand did not picked up significantly despite the drop in copper prices. With high inventories and market expectations that the Federal Reserve will maintain high interest rates, copper prices are unlikely to rebound in the near future.

Aluminum

Overnight, the most-traded SHFE 2310 aluminum contract opened at 19,325 yuan/mt and went down before closing at 19,160 yuan/mt, down 75 yuan/mt or 0.39% compared with the previous trading day. LME aluminum opened at $2,219.5/mt on Tuesday, with its high and low at $2,225/mt and $2,205/mt respectively before closing at $2,215.5/mt, a decrease of $1.5/mt or 0.07%. On the macro front, the US dollar index rose slightly overnight. The Fed will announce the latest meeting results and policy statement at 2 a.m. on Thursday. The US dollar remained wobbly overnight despite market consensus that the Fed will keep policy rates on hold. In addition, the central banks of the United States, United Kingdom, and Japan will make interest rate decisions this week. On a fundamental level, the growth rate of domestic aluminum supply is decelerating, the import window is open, and the market's overseas aluminum ingot supply is on the rise. In addition, due to no obvious improvement in the downstream operating rate during the peak season, both aluminum ingots and aluminum billet faced inventory accumulation this week. Short-term low inventory and low warehouse receipts will support aluminum prices, though. SHFE aluminum contract is anticipated to oscillate at a high level. Follow-up attention should be paid to domestic aluminum inventories and downstream consumption.

Lead

Overnight, LME lead prices opened at $2249/mt and closed at $2220/mt, a decrease of 1.22%. During the Asian session, LME lead moved between $2240-2250/mt. During the European session, LME lead stocks increased over 10,000. Prices fell to $2215/mt.

The most active SHFE 2310 lead contract prices opened at 17,310 yuan/mt, jumping to the highest in two weeks. The contract closed at 17260 yuan/mt, an increase of 0.26%. Open interest stood at 85876 lots, a decrease of 656 lots from the previous trading day.

Zinc

Overnight, LME zinc prices opened at $2537/mt and closed down $50/mt or 1.97% at $2489/mt. The trading volume was 10042 lots, and open interest increased 2383 lots to 226,000 lots. Eurozone CPI data has declined month-on-month. U.S. real estate data shows that the economy is quite resilient. This supports the signal from the Federal Reserve to raise interest rates again, and bearish sentiment is fermenting.

Last evening, the most active SHFE 2311 zinc contract prices opened at 21500 yuan/mt and closed at 21375 yuan/mt, down 150 yuan/mt or 0.7%. Trading volume stood at 39,000 lots, and open interest increased by 1666 lots to 94,000 lots. Recently, the SHFE/LME zinc price ratio has dropped slightly from 9.2 to 8.8, and the import profit and loss has dropped from more than 1,000 yuan/mt to about 500 yuan/mt. However, the current import window is still open. At the same time, as imported zinc continues to arrive, there is still significant impact on domestic spot prices, weakening support for SHFE zinc prices.

Tin

SHFE 2310 tin contract rose slightly after opening on the Tuesday night session, then maintained sideways fluctuations and finally closed at 221,940 yuan/mt, up 0.79%.

Spot premiums and discounts barely changed yesterday. Small brand tin ingots were offered at a discount of 100 yuan/mt to a premium of 300 yuan/mt, premiums of 300-600 yuan/mt for delivery brands, premiums of 1,000-1,200 yuan/mt for Yunxi brands, and discounts of 200-500 yuan/mt for imported tin brands. The SHFE tin prices fell sharply yesterday, but the overall purchasing sentiment in the downstream market was still not high, with trading status divided.

Nickel

Overnight, the most-traded SHFE nickel contract opened at 162,250 yuan/mt, and closed at 161,670 yuan/mt, down 1,230 yuan/mt. Trading volume dropped by 29,007 lots, and open interest decreased by 2,008 lots. On the macro front, market participants should pay attention to the Fed’s interest rate decision on September 21, CST. The current market expectation is 5.50%, which is unchanged from the previous value. Market participants mostly believe that the Fed won’t raise interest rates this time, which will have a positive effect on commodities. In terms of fundamentals, as advance purchasing came to an end, yesterday’s spot market transaction activity declined. In summary, it is expected that nickel prices may continue to fluctuate downward in the future.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
il y a 12 heures
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
Lire la suite
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG : l'expansion du projet de sulfures de Gediktepe produit ses premiers concentrés de cuivre et de zinc ; la pleine production visée d'ici fin 2026
ACG Metals a annoncé le 1er septembre que sa mine de Gediktepe en Turquie a produit son premier concentré de cuivre le 31 août, marquant le début de la phase de montée en puissance. L'entreprise augmentera progressivement le débit et optimisera les performances de l'usine, avec un objectif de pleine production d'ici fin 2026. L'objectif de production annuelle en régime de croisière de Gediktepe est de 20 000 à 25 000 tonnes d'équivalent cuivre. L'annonce complète a également confirmé que la mine a produit son premier concentré de zinc en août 2026, bien que la date précise et les volumes n'aient pas été divulgués. SMM estime la production de zinc contenu dans le concentré de la mine à environ 10 000 à 15 000 tonnes en 2026.
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
Lire la suite
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
[ Analyse SMM ] Guide visuel des rapports semestriels 2026 de 19 fonderies de cuivre
il y a 12 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
il y a 14 heures
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Lire la suite
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
MMG passe une commande d'équipement de 64 millions de dollars américains pour soutenir l'expansion de Khoemacau au Botswana
Epiroc a obtenu une commande d'environ 610 millions de couronnes suédoises (64 millions de dollars américains) auprès de MMG Limited et de ses sous-traitants miniers, China Huaye et 23MCC, pour des équipements miniers souterrains destinés à soutenir l'expansion de la mine de cuivre de Khoemacau au Botswana. La commande comprend des engins de foration en front de taille, des engins de foration de production, des engins de boulonnage par câble, des chargeuses et des camions miniers souterrains, ainsi que des systèmes de télécommande, des pièces de rechange, de la formation et un support technique sur site. Ces équipements soutiendront l'expansion en cours de Khoemacau par MMG, conçue pour faire passer la capacité de production annuelle d'environ 60 000 tonnes à 130 000 tonnes de cuivre métal contenu dans le concentré. Le projet comprend la construction d'une nouvelle usine de traitement de 4,5 Mt/an, qui portera la capacité totale de broyage à plus de 8 Mt/an, parallèlement au développement de Zone 5 North, Mango et Zeta North-East. Le premier concentré de cuivre issu de l'expansion est attendu au premier semestre 2028. Epiroc a indiqué que la livraison de la nouvelle flotte souterraine commencera au quatrième trimestre 2026 et devrait s'achever au deuxième trimestre 2028, ce qui correspond globalement au calendrier de l'expansion. La flotte commandée comprend des engins de foration en front de taille Boomer, des engins de foration de production Simba, des engins de boulonnage par câble Cabletec, des chargeuses Scooptram et des camions souterrains Minetruck, plusieurs unités étant équipées pour l'automatisation et l'opération à distance. Cette commande d'équipements représente une nouvelle étape d'exécution pour l'expansion déjà approuvée de Khoemacau, plutôt qu'un nouvel objectif de production. Avec l'avancement des achats et des livraisons d'équipements programmées jusqu'au deuxième trimestre 2028, le projet continue de progresser vers l'augmentation prévue par MMG de la capacité de cuivre contenu dans le concentré à 130 000 tonnes par an. Cette expansion représente une augmentation significative planifiée de la capacité de production de cuivre de Khoemacau dans la ceinture de cuivre du Kalahari au Botswana.
il y a 14 heures