Conversion Margins of Aluminium Billets in South China May Rebound As Aluminium Inventory Accumulation Misses Expectations

Publié: Jan 29, 2023 15:56 (GMT+8)
Source: SMM
SMM predicts that the aluminium billet inventory will surge high before falling rapidly, while conversion margins will fluctuate upwards.

SHANGHAI, Jan 29 (SMM) - According to SMM statistics, as of January 29, 2023, the domestic aluminium inventory was 929,000 mt, an increase of 185,000 mt compared with the pre-holiday inventory (January 19). The domestic inventory of aluminium billets added 35,300 mt to 167,200 mt. In south China, the inventory of aluminium ingots stood at 198,700 mt, an increase of 43,400 mt, and the inventory of aluminium billets stood at 83,700 mt, up 16,800 mt. SMM estimates that the inventory of aluminium ingots in south China will be close to 215,000 mt on January 30, the first trading day after the Chinese New Year (CNY) holiday, with an increase of 60,000 mt. Meanwhile, the aluminium billet inventory will gain about 20,000 mt to reach 90,000 mt. In other words, the total aluminium inventory will rise by 80,000 mt within three days after the production resumption post the CNY holiday. That said, the increase still falls shy of the previous forecast of 115,000 mt.

According to SMM data, the national aluminium billet inventory increased by 35,000 mt or 26.7% during the CNY holiday. Compared with the inventory data during the same period in the past five years, this year's inventory increment ranks only fourth. In other words, the amount of increase is acceptable. In south China, the inventory of aluminium billets stood at 83,700 mt, a relatively low level during the past five years and only higher than that in 2020. In terms of conversion margins, on the last trading day before the CNY holiday, the conversion margins of φ90 and φ120 aluminium billets were 200 yuan/mt and 100 yuan/mt respectively, an absolute low level compared with the data in the past two years.

In the past two years, the aluminium billet inventory showed an inverted V-shaped trend during the CNY holiday. Although the inventory usually climbed after the holiday, it will immediately fall from highs. In contrast, the conversion margins usually show an upward trend after the CNY holiday.  

What about post-holiday inventory and conversion margins this year?

SMM predicts that the previous pattern will remain this year. Specifically, the aluminium billet inventory will surge high before falling rapidly, while conversion margins will fluctuate upwards. The reasons are as follows. First, the current conversion margins are low, which indicates a sufficient upward room for rebound. As the accumulation of stocks during the holiday misses the expectation, the market is confident that conversion margins will pick up after the holiday without the pressure of high inventory. Second, the economy is sure to recover with the pandemic under control, and the consumption is likely to pick up. Before the holiday, most downstream extrusion factories took holidays early without restocking in advance, resulting in a sharp drop in the outflows of billets from the social warehouses. The muted trades once triggered bearish sentiment. However, there are signs of an economic recovery and thriving consumption after the holiday. The demand for aluminium billets will rebound with the rising operating rates of extrusion factories. Therefore, it is expected that the aluminium billet inventory will be consumed, though it will take time. Before the holiday the aluminium prices in south China soared above 10,000 yuan/mt, and the most-trade SHFE aluminium contract also showed huge momentum. During the CNY holiday, LME aluminium consolidated at highs and as of January 29 rose by 0.52% compared with pre-holiday. If SHFE aluminium opens high tomorrow and moves sideways at high levels, the conversion margins of aluminium billets in south China will rebound. SMM thinks that the conversion margins of φ120 aluminium billets are likely to return to above 200 yuan/mt.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
Offre révisée de prime CIF MJP du T4 26 par RTA à 280 $US/t
25 Sep 2026 09:33 (GMT+8)
Offre révisée de prime CIF MJP du T4 26 par RTA à 280 $US/t
Lire la suite
Offre révisée de prime CIF MJP du T4 26 par RTA à 280 $US/t
Offre révisée de prime CIF MJP du T4 26 par RTA à 280 $US/t
Offre révisée de prime MJP CIF pour le T4 2026 par RTA à 280 $US/t (contre 310 $US/t). Validité : 28 septembre 2026
25 Sep 2026 09:33 (GMT+8)
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
24 Sep 2026 20:58 (GMT+8)
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
Lire la suite
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
Le laminoir à aluminium avancé de Henan Yirui entre en production, visant la croissance du marché haut de gamme
Le 20 septembre, le laminoir dégrossisseur à tôles fortes du projet de fabrication intelligente de nouveaux matériaux à base d'aluminium d'une capacité de 720 000 tonnes par an de Henan Yirui New Materials Technology Co., Ltd. a été officiellement mis en service. Avec un investissement total de 1,5 milliard de yuans, le projet exploite le site industriel existant pour construire une ligne de laminage à chaud continu « 1+4 » de niveau international, appuyée par des équipements de transformation de l'aluminium de pointe tels que des fours de réchauffage à longerons poussants. Le projet a également mis en place un système d'Internet industriel des objets capable de surveiller en temps réel et de réguler dynamiquement les paramètres de production essentiels tels que la force de laminage et la température, garantissant ainsi efficacement la stabilité de la qualité des produits en aluminium haut de gamme et augmentant continuellement la part de marché des produits à forte valeur ajoutée.
24 Sep 2026 20:58 (GMT+8)
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
24 Sep 2026 20:58 (GMT+8)
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
Lire la suite
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
La Guinée élargit sa coopération minière avec Glencore et vise à accroître ses revenus et son industrialisation
La Guinée prévoit d'étendre sa coopération avec Glencore au raffinage de l'alumine, à l'énergie, à l'or et aux métaux de base, afin d'accroître les revenus miniers, de promouvoir la transformation locale et l'industrialisation des ressources minérales, et de renforcer la coopération avec les marchés et les entreprises minières internationales en Chine, au Moyen-Orient et au-delà.
24 Sep 2026 20:58 (GMT+8)