SMM Evening Comments (Oct 18): Shanghai Nonferrous Metals Closed Mostly with Losses

Publié: Oct 18, 2022 18:00
Shanghai nonferrous metals closed mostly with losses as the market sentiment was still not optimistic.

SHANGHAI, Oct 18 (SMM) – Shanghai nonferrous metals closed mostly with losses as the market sentiment was still not optimistic.

Shanghai copper shed 0.87%, aluminium lost 1.27%, lead inched up 0.03%, zinc dropped 0.53%, tin fell 1.48%, and nickel slid 0.87%.

Copper: The most-traded SHFE 2211 copper closed down 0.87% or 550 yuan/mt at 62,650 yuan/mt, with open interest down 11,110 lots to 152,146 lots.

The spot market was quiet on the first trading day after the delivery of SHFE 2210. The traders quoted standard-quality copper with premiums at 1,100 yuan/mt to test market response in early trade, and good-quality copper 1,200 yuan/mt, but failed to attract buyers. The premiums then fell below 1,000 yuan/mt with narrowing SHFE 2211 and 2212 spread. In the second trading session, the premiums of standard-quality copper stabilised at 820 yuan/mt, and some cargo holders quoted 780 yuan/mt in order to promote the sales.

Aluminium: The most-traded SHFE 2211 aluminium closed down 1.27% or 235 yuan/mt to 18,315 yuan/mt, with open interest down 1,082 lots to 140,252 lots.

On the supply side, domestic operating aluminium capacity rose slightly with the new capacity commissioning and existing capacity resuming the production in Sichuan and Inner Mongolia. However, the follow-up production in Yunnan is worth attention as the province will enter the dry season soon. The supply side pressure is likely to ease in the near term. Aluminium cost was supported by high energy prices in China and abroad. On the consumption side, the operating rates of aluminium fabricators were contained by the spreading pandemic. Aluminium ingot social inventory accumulated with the arrival of some ingot in transport earlier. To sum up, aluminium prices will remain rangebound with the mixture of bullish and bearish factors.

Lead: The most-traded SHFE 2211 lead closed up 0.03% or 5 yuan/mt at 15,315 yuan/mt, with open interest down 373 lots to 58,524 lots.

SHFE lead inched up today with shorts leaving the market. In the spot market, the quotes from the smelters posted few changes, and the transactions in the spot market with downstream players were modest. The most-traded SHFE lead is expected to move in a narrow range in the near term.

Zinc: The most-traded SHFE 2211 zinc closed down 0.53% or 130 yuan/mt at 24,530 yuan/mt, with open interest down 5,465 lots to 111,148 lots.

Intraday SHFE zinc moved rangebound. SMM refined zinc output is estimated at 516,700 mt in October, underpinning zinc prices. But with the delivery of SHFE 2210, the structural imbalance brought about by the delivery gradually faded, and the market sentiment was digested as well. SHFE zinc is likely to fall in the near term.

Tin: The most-traded SHFE 2212 tin closed down 1.48% or 2,510 yuan/mt at 166,820 yuan/mt, with open interest up 7,435 lots to 42,768 lots.

In the spot market, the quotes offered by smelters diverged greatly in early trade; some were quite firm to their prices, while some lowered the quotes with falling SHFE tin. The spot premiums offered by the traders changed little. The transactions in the spot market improved as a whole, but the specific situation differed among the traders. The downstream players stood wait-and-see on falling tin prices. SHFE warrants fell 8 mt to 2,363 mt today.

Nickel: The most-traded SHFE 2211 nickel closed down 0.87% or 1,580 yuan/mt at 180,100 yuan/mt, with open interest down 4,100 lots to 57,465 lots.

On the fundamentals, Jinchuan nickel supply tightness eased with the arrival of pure nickel. For NPI, the prices rose amid short supply. In terms of demand, spot stainless steel prices rose again with the futures contract. The alloy sector still carried rigid demand for pure nickel. To sum up, nickel prices are likely to remain rangebound with moderate demand across the industrial chain.

[Disclaimer: The above representation and data is based on market information SMM believes to be reliable at the time of acquiring as well as the comprehensive assessment by SMM research team, and any and all information provided in this article is for reference only. This article does not constitute a direct recommendation for investment or any decisions in any form and clients shall act on their own discreet and any decisions made by clients are not within the responsibility of SMM.]

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
Données : évolution des marchés SHFE et DCE (3 septembre)
il y a 6 minutes
Données : évolution des marchés SHFE et DCE (3 septembre)
Lire la suite
Données : évolution des marchés SHFE et DCE (3 septembre)
Données : évolution des marchés SHFE et DCE (3 septembre)
Le tableau suivant présente les mouvements des métaux ferreux et non ferreux sur le SHFE et le DCE au 3 septembre 2026.
il y a 6 minutes
Yingchuang International soutient SMM dans la création de la « Carte mondiale de répartition de l'industrie secondaire du cuivre 2026 »
il y a 45 minutes
Yingchuang International soutient SMM dans la création de la « Carte mondiale de répartition de l'industrie secondaire du cuivre 2026 »
Lire la suite
Yingchuang International soutient SMM dans la création de la « Carte mondiale de répartition de l'industrie secondaire du cuivre 2026 »
Yingchuang International soutient SMM dans la création de la « Carte mondiale de répartition de l'industrie secondaire du cuivre 2026 »
il y a 45 minutes
Midnight Sun lance la phase deux de l'exploration du gisement de cuivre de Dumbwa en Zambie
il y a 52 minutes
Midnight Sun lance la phase deux de l'exploration du gisement de cuivre de Dumbwa en Zambie
Lire la suite
Midnight Sun lance la phase deux de l'exploration du gisement de cuivre de Dumbwa en Zambie
Midnight Sun lance la phase deux de l'exploration du gisement de cuivre de Dumbwa en Zambie
Midnight Sun Mining a lancé la phase deux de l'exploration sur son gisement de cuivre Dumbwa, détenu à 100 % en Zambie, passant d'un forage systématique à grande échelle à un programme plus ciblé visant à identifier et à étendre les zones de cuivre à plus haute teneur. Cette nouvelle phase combinera magnétisme au sol à haute résolution, géophysique par polarisation provoquée, géochimie des sols et forage au diamant, tout en testant les extensions potentielles du corridor minéralisé connu et de nouvelles structures identifiées à l'est et à l'ouest. Le programme s'appuie sur près de 75 000 mètres de forage réalisés au cours de la phase un, qui, selon Midnight Sun, ont permis de définir plusieurs zones de minéralisation cuprifère enrichie le long du corridor principal nord-sud. Le forage de la phase un est toujours en cours et devrait s'achever d'ici la fin du troisième trimestre 2026, les travaux actuels se déplaçant vers le bloc nord et utilisant des espacements plus larges pour tester d'autres zones minéralisées à plus haute teneur le long du corridor initial de 11,5 km de Dumbwa. Midnight Sun a indiqué que le système Dumbwa au sens large est associé à une anomalie de cuivre dans les sols d'environ 20 km. Un levé magnétique à haute résolution élargi est désormais étendu à l'ensemble de l'anomalie, tandis que 19,1 km linéaires supplémentaires de levés de polarisation provoquée sont en cours. Les premiers travaux magnétiques ont déjà identifié deux cibles non testées auparavant, situées à environ 1,0 à 1,2 km à l'est du corridor principal de Dumbwa, qui présentent des caractéristiques magnétiques similaires aux zones associées à une minéralisation cuprifère à plus haute teneur. Le lancement de la phase deux marque le passage de la définition de l'échelle globale et du cadre géologique de Dumbwa à un forage plus sélectif des cibles cuprifères hautement prioritaires. Le programme en est encore au stade de l'exploration et n'établit pas encore de ressource minérale ni de profil de production futur, mais la combinaison des forages extensifs de la phase un et des cibles géophysiques nouvellement identifiées pourrait aider Midnight Sun à mieux définir l'échelle, la continuité et la distribution des teneurs du système Dumbwa à mesure que l'exploration progresse.
il y a 52 minutes