Aluminium Prices Supported by Potential Production Cuts and Rising Cost

Publié: Sep 20, 2022 10:33 (GMT+8)
Though the rumoured production cuts on aluminium production in Yunnan province is casting a greater impact on the supply side, the actual scale of production restrictions is still undetermined, while the demand side has not shown signs of improvement either.

SHANGHAI, Sep 20 (SMM) - Though the rumoured production cuts on aluminium production in Yunnan province is casting a greater impact on the supply side, the actual scale of production restrictions is still undetermined, while the demand side has not shown signs of improvement either. The most-traded aluminium contract kept falling yesterday September 19, closing the day session with a loss of 1.14% at 18,710 yuan/mt.

At present, news of production cuts as a result of power rationing in Yunnan has fermented with a 10% reduction nailed in the first stage, while it is rumoured that the production curtailment could expand in the future. Nonetheless, the follow-up decisions have not been heard yet, while the sentiment experienced greater shock.

Meanwhile, the pandemic situation in Sichuan province has eased, and closed smelters are resuming the production in an orderly manner. According to SMM research, Sichuan Qixingxing Aluminium Plant started to resume the production on September 5, and is planned to power on by September 20, with the production fully resumed by November 5. Resuming production in Sichuan slightly weighed on aluminium prices, but the pressure is insignificant in light of the slow progress in production resumption.

Though the supply pressure is not great, the demand side is sluggish as well. Real estate housing completions rebounded in August, but the overall performance is still muted. The average weekly operating rate of top-tier downstream fabricators rose merely 0.4 percentage point from a week ago to 66.4% as of September 15.  The traditional seasonal high expected in September and October is yet to pay off.

In addition, domestic aluminium ingot inventory has remained low. According to SMM statistics, as of September 19, the domestic social inventory of aluminium was 685,000 mt, an increase of 10,000 mt from the previous Thursday and a decrease of 11,000 mt from the first trading day post the Mid-Autumn Festival. The reading recorded a loss of 104,000 mt from the same period last year, but a gain of 8,000 mt compared with the end of August. The overall inventory has remained low at around 680,000 mt.

The spot price of SMM A00 aluminium ingot stood at 18,750-18,790 yuan/mt as of September 19, with an average of 18,770 yuan/mt, down 100 yuan/mt from the previous Monday.

Transactions in the spot market weakened. SMM aluminium price in Foshan showed a discount of 50 yuan/mt over the SHFE 2210 contract, and the average spot price recorded 18,770 yuan/mt, down 100 yuan/mt from the previous trading day. The spread between prices in Guangdong and Shanghai narrowed to 0 yuan/mt. In the second trading session, the cargo holders were more active in selling as aluminium futures prices fell, and the spot discounts expanded. The traded prices were in premiums of (100) - 50 yuan/mt over SMM aluminium price in Foshan, or in the range of 18,650-18,780 yuan/mt.

Though both futures and spot prices fell and cost support still existed. 

Also according to SMM, the weighted full average cost of domestic aluminium in August was about 17,576 yuan/mt, up 228 yuan/mt MoM due to rising electricity cost.

In general, aluminium prices are still supported by the expected production cuts and rising cost, and will edge higher if the demand picks up. However, it is necessary to stay alert to the macro risks brought about by overseas interest rate hikes.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
Les ports nationaux enregistrent une baisse de 30 000 tonnes de stocks de bauxite la semaine dernière
il y a 22 heures
Les ports nationaux enregistrent une baisse de 30 000 tonnes de stocks de bauxite la semaine dernière
Lire la suite
Les ports nationaux enregistrent une baisse de 30 000 tonnes de stocks de bauxite la semaine dernière
Les ports nationaux enregistrent une baisse de 30 000 tonnes de stocks de bauxite la semaine dernière
【Stock portuaire SMM de bauxite importée】Selon les statistiques de SMM du 23 octobre, le stock total de bauxite dans dix ports nationaux a diminué de 30 000 tonnes par rapport à la semaine précédente.
il y a 22 heures
30 000 t d'alumine négociées à 361 $/t FOB Inde pour expédition en novembre
il y a 22 heures
30 000 t d'alumine négociées à 361 $/t FOB Inde pour expédition en novembre
Lire la suite
30 000 t d'alumine négociées à 361 $/t FOB Inde pour expédition en novembre
30 000 t d'alumine négociées à 361 $/t FOB Inde pour expédition en novembre
Transaction d'alumine : Le 23 octobre 2026, 30 000 tonnes d'alumine ont été échangées à 361 $/t FOB Inde pour une expédition en novembre.
il y a 22 heures
【SMM Info Flash Aluminium】La demande de FRP en aluminium série 5 des Amériques s'étend, la consommation nord-américaine atteindra 2,23 millions de tonnes
23 Oct 2026 18:39 (GMT+8)
【SMM Info Flash Aluminium】La demande de FRP en aluminium série 5 des Amériques s'étend, la consommation nord-américaine atteindra 2,23 millions de tonnes
Lire la suite
【SMM Info Flash Aluminium】La demande de FRP en aluminium série 5 des Amériques s'étend, la consommation nord-américaine atteindra 2,23 millions de tonnes
【SMM Info Flash Aluminium】La demande de FRP en aluminium série 5 des Amériques s'étend, la consommation nord-américaine atteindra 2,23 millions de tonnes
La demande de produits laminés plats en aluminium de série 5xxx dans les Amériques devrait croître, soutenue par l’allègement automobile, la construction navale et les investissements dans les infrastructures. La consommation nord-américaine devrait passer de 1,79 million de tonnes en 2025 à 2,23 millions de tonnes d’ici 2032, soit une croissance d’environ 24,6 %, la demande atteignant environ 2,10 millions de tonnes d’ici 2030. Cette croissance sera portée par les applications automobiles et marines aux États-Unis, ainsi que par l’industrie canadienne de l’aluminium à faible empreinte carbone et l’expansion de la base manufacturière automobile au Mexique. Parallèlement, la consommation sud-américaine devrait passer de 502 710 tonnes en 2025 à 602 020 tonnes d’ici 2032, soit une hausse d’environ 19,8 %, le Brésil restant le plus grand marché de la région. La fabrication automobile, les transports et les investissements dans les infrastructures devraient soutenir la demande, bien que les politiques commerciales, les coûts des matières premières et les capacités de transformation en aval puissent influencer le rythme de la croissance.
23 Oct 2026 18:39 (GMT+8)
Aluminium Prices Supported by Potential Production Cuts and Rising Cost - Shanghai Metals Market (SMM)