[SMM monthly Outlook] the rising trend of the new energy vehicle market in the future is still gradually recovering in the installed capacity of iron-lithium batteries.

Publié: Feb 26, 2021 21:45
According to data from the China Automobile Association, in January 2021, the production and sales of new energy vehicles completed 194000 and 179000 respectively, down 17.8% and 27.8% respectively from the previous month, and an increase of 285.8% and 238.5% respectively over the same period last year. Although the sales of new energy vehicles decreased month-on-month in January this year, there was a significant increase compared with the beginning of previous years. In addition, Tesla Model Y production capacity is gradually climbing to meet consumer demand, and BYD released new plug-in models Qin and Tang in March to drive market demand, plus local policy support.

SMM, Feb. 26: according to data from the China Automobile Association, in January 2021, the production and sales of new energy vehicles completed 194000 and 179000 respectively, down 17.8% and 27.8% respectively from the previous month, and an increase of 285.8% and 238.5% respectively over the same period last year. New energy vehicles have set a new monthly sales record for seven months in a row.

The month-on-month decline in January is basically similar to that in previous years. After 20% of the subsidy for new energy vehicles was determined in 2021, the market snapped up at the end of December, coupled with the fact that the countries that caused the epidemic at the beginning of this year advocated the local Spring Festival. Many consumers have also reduced their desire to buy new cars in the New year. The month-on-month decline in January is relatively small compared with previous years, and sales of new energy vehicles are still growing this year.

Source: China Automobile Association

According to the analysis of the China Automobile Association, there are two reasons for the sharp increase in production and sales year-on-year this month, one is that the current market demand is still recovering, and the other is that the 2020 Spring Festival holiday is in January, coupled with the impact of the epidemic at the beginning of last year, so the base level is low. From a month-on-month point of view, the rapid decline in production reflects that the insufficient supply of automotive chips affects the production rhythm of enterprises.

Power battery

According to the power battery installation data of the China Automotive Power Battery Industry Innovation Alliance, the output of the power battery industry was 12.0 GWH in January, an increase of 317.2% over the same period last year and a month-on-month decline of 20.4%. The output of ternary lithium battery was 6.8GWh, accounting for 56.8% of the total output, an increase of 241.6% over the same period last year; the output of lithium iron phosphate battery was 5.2GWh, accounting for 43.1% of the total output, up 493.6% from the same period last year. The decline in the output of battery enterprises in January was mainly due to the approach of the Spring Festival, the weakening of downstream market demand, coupled with a partial shortage of battery materials, and a month-on-month decline in output.

China's power battery output in January 2021

Source: China Automotive Power Battery Industry Innovation Alliance

In January, the installed capacity of power batteries in China was 8.7GWH, an increase of 273.9% over the same period last year and a decrease of 33.1% from the previous month. The installed capacity of ternary lithium batteries was 5.4GWh, an increase of 241.9 percent over the same period last year, while that of lithium iron phosphate batteries was 3.3GWh, an increase of 349.8 percent over the same period last year. The month-on-month decline in installed capacity in January was mainly due to a decline in production by car companies. In January, the installed capacity of iron and lithium decreased by 52.8% from the previous month, and the month-on-month decline was much more than three yuan. This was mainly due to the rush installation strategy adopted by new energy commercial vehicles at the end of last year, which led to a sharp increase in iron and lithium installation in December and exceeded three yuan. In January, the installed capacity of new energy commercial vehicles decreased significantly, while the installed capacity of new energy passenger vehicles decreased slightly. New energy commercial vehicles are mainly equipped with iron lithium batteries, while passenger vehicles with ternary batteries account for a higher proportion.

Power battery installed capacity in January 2021

Installed capacity of power batteries in China in 2019-2021

Source: China Automotive Power Battery Industry Innovation Alliance

SMM believes that although sales of new energy vehicles decreased month-on-month in January this year, there was a significant increase compared with the beginning of previous years. It is expected that the Spring Festival factors will lead to a slight decrease in February, and the market will gradually recover in March. Coupled with the gradual climbing of Tesla Model Y production capacity and gradually meeting consumer demand, BYD released new plug-in models Qin and Tang in March to drive market demand, coupled with local policy support, the production and sales of new energy vehicles in the future are still good. The installed capacity of power batteries is also expected to increase with the demand of the car market, among which many iron lithium and ternary matching new models will be on the market this year. Iron lithium has BYD's new model, Tesla Model 3, Hongguang MINI upgrade model, and so on. It is expected that iron lithium will maintain last year's rising demand and continue to increase its share in the passenger car market.

SMM battery materials research team

Mei Wangqin 021-51666759

Huo Yuan 021-51666898

Liu Xiaoyi 021-51666716

Yuan Ye 021-51595792

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
[Rumeur sur la batterie à semi-conducteurs réfutée : Wang Fang du CATARC déclare qu'aucune détermination de conformité n'a été faite pour les entreprises de batteries à semi-conducteurs]
il y a 45 minutes
[Rumeur sur la batterie à semi-conducteurs réfutée : Wang Fang du CATARC déclare qu'aucune détermination de conformité n'a été faite pour les entreprises de batteries à semi-conducteurs]
Lire la suite
[Rumeur sur la batterie à semi-conducteurs réfutée : Wang Fang du CATARC déclare qu'aucune détermination de conformité n'a été faite pour les entreprises de batteries à semi-conducteurs]
[Rumeur sur la batterie à semi-conducteurs réfutée : Wang Fang du CATARC déclare qu'aucune détermination de conformité n'a été faite pour les entreprises de batteries à semi-conducteurs]
[La rumeur sur les batteries à électrolyte solide est démentie : Wang Fang du CATARC affirme qu'aucune détermination de conformité n'a été effectuée sur les entreprises de batteries à électrolyte solide] Le 4 septembre 2026, Wang Fang, scientifique en chef du Centre de recherche et de technologie automobiles de Chine (CATARC), a clarifié les rumeurs récentes lors de la « Conférence mondiale sur les batteries de puissance 2026 » : le CATARC n'a effectué aucune détermination concernant les entreprises de batteries à électrolyte solide, et les rumeurs en question sont de « fausses informations ». Récemment, des rapports de marché affirmaient que le CATARC, sur la base de la norme nationale GB/T 43568-2026 « Batteries à électrolyte solide pour véhicules électriques – Partie 1 : Terminologie et classification », entrée en vigueur en juillet de cette année, avait effectué des déterminations sur plus de 320 entreprises impliquées dans les batteries à électrolyte solide, et que seules 9 d'entre elles avaient finalement satisfait à tous les critères de conformité.
il y a 45 minutes
[Batterie au lithium : Foshan Plastics prévoit plus de 7 milliards de RMB pour une capacité de séparateurs haut de gamme]
il y a 45 minutes
[Batterie au lithium : Foshan Plastics prévoit plus de 7 milliards de RMB pour une capacité de séparateurs haut de gamme]
Lire la suite
[Batterie au lithium : Foshan Plastics prévoit plus de 7 milliards de RMB pour une capacité de séparateurs haut de gamme]
[Batterie au lithium : Foshan Plastics prévoit plus de 7 milliards de RMB pour une capacité de séparateurs haut de gamme]
Foshan Plastics Technology a annoncé le 3 septembre que sa filiale à 100 % Gellec (Hebei Jinli) investira environ 3,35 milliards de RMB dans une base de séparateurs par voie humide de 4 milliards de m²/an à Shaoguan, Guangdong, et environ 3,81 milliards de RMB dans un projet de séparateurs revêtus de 4 milliards de m²/an à Wu'an, Hebei. Elle prévoit également un placement privé pouvant atteindre 4 milliards de RMB pour financer ces projets, l'actionnaire de contrôle Guangxin Group souscrivant entre 400 millions et 1 milliard de RMB, afin d'accroître l'échelle d'approvisionnement en séparateurs et la compétitivité des coûts.
il y a 45 minutes
[État solide : ProLogium démarre la production en série de cellules tout-solide Gen 3.5 à 381 Wh/kg]
il y a 46 minutes
[État solide : ProLogium démarre la production en série de cellules tout-solide Gen 3.5 à 381 Wh/kg]
Lire la suite
[État solide : ProLogium démarre la production en série de cellules tout-solide Gen 3.5 à 381 Wh/kg]
[État solide : ProLogium démarre la production en série de cellules tout-solide Gen 3.5 à 381 Wh/kg]
ProLogium a annoncé le 2 septembre que sa batterie céramique au lithium de troisième génération Gen 3.5 est entrée en production de masse dans son usine à l'échelle du gigawatt à Taïwan, en Chine, faisant passer la technologie tout-solide à haute densité énergétique du stade pilote à une production à grande échelle. Les tests TÜV montrent que sa grande cellule de 185,4 Ah atteint 381 Wh/kg et 903 Wh/L, et les tests d'UL Solutions selon la norme chinoise GB/T 43568-2026 confirment sa classification tout-solide. ProLogium a expédié plus de 2,4 millions de cellules depuis 2013 et remporté plus de 175 commandes répétées dans l'automobile ; sa batterie Gen 4 de nouvelle génération ne nécessite qu'environ 10 % de modernisation des lignes existantes, visant les centres de données IA, les véhicules électriques, le maritime et l'aérospatial.
il y a 46 minutes