Exclusive: China's base metals output in December

Publié: Jan 8, 2021 19:08
SMM survey showed that China produced 862,000 mt of copper cathode in December, rising 4.9% from November, and 7.01% from a year ago. China’s copper cathode output totalled 9.3 million mt in 2020, up 3.97% from 2019.

SHANGHAI, Jan 8 (SMM)—This is a roundup of China's base metals output in December 2020, from an exclusive survey of key producers by SMM analysts.

Copper

SMM survey showed that China produced 862,000 mt of copper cathode in December, rising 4.9% from November, and 7.01% from a year ago. China’s copper cathode output totalled 9.3 million mt in 2020, up 3.97% from 2019. (China’s copper cathode output for November was revised to 821,700 mt) Large-scale copper smelters continued to keep high operating rates in order to fulfill annual production targets. Chifeng Jinjian's new capacity continued to yield output, and some smelters in Shandong gradually returned to normal production. Sufficient supply of copper scrap eased feedstock shortages at smelters.

Treatment charges (TCs) for copper concentrate fell to $47.34/mt this week, which may post pressure for copper smelters’ production in early 2021.

According to smelters’ production schedules, SMM expects China’s copper cathode output to fall 8.34% on the month but rise 8.84% on the year to 790,100 mt in January, as several large-scale smelters will undergo maintenance in the month.

Alumina

China’s alumina output stood at 5.96 million mt in December. This included 5.75 million mt of metallurgical-grade alumina, with the daily output down 4.04% on the month but up 2.26% on the year to 185,500 mt. Output of metallurgical-grade alumina in 2020 totalled 67.29 million mt, 2.02% lower on a year-on-year basis. Roasting capacity at some alumina plants in Shandong, Henan and Shanxi was restricted, and this led to the decline in alumina output in December.

As of early January, the operating capacity of metallurgical-grade alumina stood at 70.2 million mt/year. SMM sees output of metallurgical-grade alumina at 5.96 million mt in January (31 days), with the daily output rising slightly. State Power Investment Wuchuan commissioned its roasting capacity on December 25. Alumina plants in Shanxi and Henan resumed their roasting capacity during the New Year’s Day holiday, and some plants in Shandong recovered their roasting capacity in late December.

Aluminium

China’s primary aluminium output rose 8% year on year to 3.28 million mt in December (31 production days), showed an SMM survey. As of early January, there was 39.24 million mt among 44.2 million mt per year of existing primary aluminium capacity in operation, while operating rates across Chinese primary aluminium producers stood at 90.8%. The daily average primary aluminium output rose 300 mt from November to 105,800 mt in December, and Yunnan Shenhuo and Inner Mongolia Chuangyuan mainly contributed to the increase. The proportion of aluminum water came in at 66.6%, down 1.7% month on month.

Throughout the year of 2020, China’s primary aluminium output increased 4.8% year on year to 37.12 million mt, while consumption rose 5.77% to 38.19 million mt. SMM expects China’s primary aluminium output to stand at 3.3 million mt in January, while import at about 150,000 mt. Demand for primary aluminium weakened in late December, and inventories are likely to build up in January.

Nickel

China’s refined nickel output rose 7.49% or 1,023 mt from November, but shrank 7.9% from a year earlier, to 14,700 mt in December. The Gansu smelter operated normally in December, and fulfilled its annual production target of 150,000 mt after stepping up production by 8.8% in December. The smelter in Xinjiang raised output by 7.18% from November, bringing its annual output to 11,900 mt. The Shandong smelter suspended its production line of refined nickel in December and put raw materials into nickel sulphate production.

SMM expects China’s refined nickel output to fall to 13,000 mt in January 2021, as smelters usually reduce operating rates ahead of the Chinese New Year holiday. Those suspended smelters are unlikely to restart production before the CNY holidays due to shortage of raw materials and cash flow issues.

Nickel pig iron (NPI)

China’s NPI output shrank 12.5% from November to 37,300 mt Ni in December. This included 29,800 mt Ni of high-grade NPI, down 15.1% on the month, and 7,500 mt Ni of low-grade NPI, down 0.8% month on month. Shortage of raw materials and weak demand from steel makers drove NPI plants to cut or suspend production in December. A large-scale high-grade NPI plant in east China reduced output by 50%. A low-grade NPI plant in central China suspended production in December on environmental concerns, which led to the slight decline in output. Some steel makers stepped up production of #200 stainless steel due to its improved profits.

SMM expects China’s NPI output to fall 3.1% on the month to 36,200 mt Ni in January. Output of high-grade NPI is likely to shrink 5.6% to 28,200 mt Ni, while that of low-grade NPI to rise 6.8% to 8,000 mt Ni. Low inventories of raw materials and high prices of nickel ore are likely to prompt NPI plants to trim output. Besides, the approaching Chinese New Year holiday and a resurgence of COVID-19 cases in some Chinese provinces will affect transportation of feedstock and supplementary materials.

Nickel sulphate

China’s nickel sulphate output expanded 6.07% on the month and 63.97% on the year, to 77,800 mt or 17,100 mt in nickel content in December. This included 69,400 mt of battery-grade materials and 8,400 mt of electroplating materials. Most of the nickel sulphate plants operated at full capacity in December as demand from downstream users improved as they needed to restock raw materials before the Chinese New Year holiday. Nickel sulphate prices steadied at high levels in the month.

SMM expects China’s nickel sulphate output to drop 589 mt Ni or 3.44% from December to 16,500 mt Ni in January, as an intermediate product project was suspended and is likely to resume in Q2. Besides, rising nickel prices will also drive some nickel salts plants to cut output.

Zinc

China's refined zinc output stood at 553,500 mt in December, falling 8,800 mt or down 1.57% on month and up 3.06% on year. In the full 2020, output totalled 6.1 million mt, up 4.44% from 2019. Zinc smelters produced 78,700 mt of zinc alloy in December, down 3.78% from the previous month.

SMM survey showed that China's refined zinc output in December basically met expectations. Treatment charges (TCs) for domestic 50 grade zinc concentrate continued to decline in December. Domestic smelters rarely reduced production or turned into maintenance due to the shortage of zinc concentrate supply. China's refined zinc output in December fell from November mainly due to smelters’ routine maintenance and decreased zinc products of smelters led by weaker hot-galvanising alloy orders. In addition, Xinjiang Zijin Smelter was officially put into production on December 10, whose main product is #1 zinc due to equipment debugging.

TCs for zinc ore in Inner Mongolia and Hunan have temporarily slowed their downward trend in January, but TCs for zinc ore in other regions continued to decline. In addition, as imported zinc ore from smelters gradually arrived at ports in January, smelters’ raw material inventory days increased 3 days from the previous month to 25-26 days, most domestic refineries are expected to maintain stable production in January. It is expected that the reduction in domestic refined zinc in January will be mainly concentrated in the maintenance of Yunnan and Guangxi, and the reduction in production in Shaanxi and Qinghai.

China's refined zinc output is expected to decrease 6,300 mt to 547,200 mt in January.

Lead

SMM data showed that China produced 286,000 mt of primary lead in December, down 1.3% from November, and up 2.4% from a year ago. In the full 2020, output increased 4.42% from 2019.

According to an SMM survey, primary lead smelters turned into maintenance and resumed production simultaneously in December. Hunan Yuteng resumed production. Some enterprises slightly increased production in December in order to complete the annual production and sales plan before year-end, while Henan Xinling carried out a one-month routine maintenance, Jiangxi Jinde and Yunnan Zhenxing both have minor maintenance. Output in December posted a slight decline, in line with expectations of the previous report.

Taking into account the limited supply of raw materials in winter and the subsequent Spring Festival holiday, some small and medium-sized enterprises plan to start maintenance in the middle and late January, and take a holiday after the maintenance. In addition, Henan Minshan, Shibin, Yunnan Mengzi turned into routine maintenance. Jiangxi Jinde, which carried out maintenance last month, and Yunnan Zhenxing resumed production.

SMM expects China's primary lead output to decrease over 10,000 mt to 274,000 mt in January.

Tin

China's refined tin output stood at 16,644 mt in December, up 19.42% on month and up 5.94% from November.

Tin prices performed strongly in December, gradually rising from 145,000 yuan/mt to over 150,000 yuan/mt, and prices have once increased to 155,000 yuan/mt over the month. Rising tin prices encouraged companies to turn into active production. Large tin factories in Yunnan, Guangxi, and Jiangxi all increased their output in December compared with the previous month. Some medium-sized companies also increased production to varying degrees. However, some companies cut production due to difficulties in purchasing raw materials.

Tin prices continue to remain firm in the near term, which will continue to attract manufacturers with sufficient raw materials to maintain high production. However, ahead of the Spring Festival holiday. Most tin factories in Yunnan will maintain normal production, but some tin factories in Jiangxi, Zhejiang and other regions will stop production for the holidays in advance at the end of January, and refined tin output will be slightly affected. China's refined tin output is expected to decrease to 16,000 mt in January.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
Kamoa-Kakula commence à recevoir 30 MW de puissance de base alors que l'installation solaire-batterie atteint l'exploitation commerciale.
il y a 13 minutes
Kamoa-Kakula commence à recevoir 30 MW de puissance de base alors que l'installation solaire-batterie atteint l'exploitation commerciale.
Lire la suite
Kamoa-Kakula commence à recevoir 30 MW de puissance de base alors que l'installation solaire-batterie atteint l'exploitation commerciale.
Kamoa-Kakula commence à recevoir 30 MW de puissance de base alors que l'installation solaire-batterie atteint l'exploitation commerciale.
Le système solaire photovoltaïque et de stockage d’énergie par batteries de CrossBoundary Energy, qui alimente le complexe cuprifère Kamoa-Kakula en République démocratique du Congo, est entré en exploitation commerciale le 12 août 2026 et fournit désormais 30 MW d’électricité de base continue à Kamoa Copper. Cette étape intervient 16 mois après la signature d’un contrat d’achat d’électricité entre Kamoa Copper et CrossBoundary Energy en avril 2025, marquant le passage du projet de la mise en service à l’exploitation commerciale. L’installation comprend 233 MWc de capacité solaire photovoltaïque et un système de stockage d’énergie par batteries de 123 MVA/526 MWh, conçu pour fournir au moins 30 MW de puissance garantie au complexe minier. Le système de batteries permet de stocker l’électricité produite pendant la journée et de la distribuer lorsque la production solaire diminue, permettant ainsi au projet de fournir une alimentation continue plutôt qu’intermittente. CrossBoundary Energy a déclaré que ce projet est la première installation solaire-plus-batterie de ce type et de cette échelle en Afrique à fournir de l’électricité de base. Cette nouvelle source d’approvisionnement fait partie des efforts plus larges de Kamoa-Kakula pour renforcer la fiabilité électrique de l’exploitation. Kamoa Copper, détenue conjointement par Ivanhoe Mines, Zijin Mining Group et le gouvernement de la RDC, développe des capacités solaires et de batteries supplémentaires parallèlement à des améliorations du réseau de la RDC, afin de réduire l’exposition aux interruptions de courant et la dépendance à l’électricité produite par diesel. Le début de l’exploitation commerciale constitue une étape importante pour l’approvisionnement électrique de Kamoa-Kakula, où la fiabilité de l’électricité reste cruciale pour maintenir des opérations minières et de traitement stables. La nouvelle alimentation renouvelable garantie de 30 MW devrait fournir une source supplémentaire d’électricité continue en complément du réseau existant et de la production de secours, tout en réduisant la dépendance au diesel. Ce développement est particulièrement pertinent alors que Kamoa-Kakula continue de gérer des contraintes opérationnelles et infrastructurelles, faisant de l’amélioration de la disponibilité électrique un facteur important pour soutenir une production de cuivre plus stable.
il y a 13 minutes
[Analyse SMM] La tension sur les concentrés de cuivre s’étend au marché de la ferraille — pourquoi les prix de la ferraille de cuivre restent-ils élevés ?
il y a 4 heures
[Analyse SMM] La tension sur les concentrés de cuivre s’étend au marché de la ferraille — pourquoi les prix de la ferraille de cuivre restent-ils élevés ?
Lire la suite
[Analyse SMM] La tension sur les concentrés de cuivre s’étend au marché de la ferraille — pourquoi les prix de la ferraille de cuivre restent-ils élevés ?
[Analyse SMM] La tension sur les concentrés de cuivre s’étend au marché de la ferraille — pourquoi les prix de la ferraille de cuivre restent-ils élevés ?
[Analyse SMM : la tension sur les concentrés de cuivre s’étend au marché de la ferraille — pourquoi les prix des déchets de cuivre restent-ils élevés ?] La faiblesse de l’offre de concentrés de cuivre et des TC fortement négatifs poussent les fonderies et les transformateurs vers des matières premières recyclées. Les faibles stocks mondiaux, la lenteur de la production de déchets et les pénuries de matériaux conformes en Chine soutiennent des taux de paiement élevés. SMM s’attend à ce que la demande d’importation reste ferme, même si toute mise sur le marché des déchets accumulés hors taxe en Chine pourrait peser sur les prix.
il y a 4 heures
Le projet de cuivre Kitumba de Sinomine entre dans sa phase finale de mise en service après un essai réussi du concasseur primaire.
il y a 6 heures
Le projet de cuivre Kitumba de Sinomine entre dans sa phase finale de mise en service après un essai réussi du concasseur primaire.
Lire la suite
Le projet de cuivre Kitumba de Sinomine entre dans sa phase finale de mise en service après un essai réussi du concasseur primaire.
Le projet de cuivre Kitumba de Sinomine entre dans sa phase finale de mise en service après un essai réussi du concasseur primaire.
Sinomine Resource Group (002738.SZ) a annoncé de nouvelles avancées dans la construction de son projet intégré d'extraction, de traitement et de métallurgie du cuivre de Kitumba en Zambie. En août 2026, le pipeline d'eau de 38 km du projet avait été entièrement mis en service, tandis que l'installation de concassage primaire a réalisé avec succès son premier essai intégré avec du minerai. Les infrastructures de soutien essentielles et le système de concassage en amont sont maintenant prêts à être mis en service, marquant l'entrée du projet dans sa phase finale de construction. Kitumba est conçu pour traiter 3,5 millions de tonnes de minerai par an, avec une capacité métallurgique de 35 000 tonnes de cathodes de cuivre par an. En régime permanent, le projet devrait produire en moyenne 33 000 tonnes de cathodes de cuivre et 55 000 tonnes de concentré de cuivre par an. Sa durée de vie opérationnelle prévue est de 15 ans et il devrait produire un total de 570 200 tonnes de cuivre contenu sur cette période.
il y a 6 heures