SMM Evening Comments (Jun 18): SHFE base metals closed mostly higher on lingering recovery hopes

Publié: Jun 18, 2020 18:31 (GMT+8)
SHFE nonferrous metals strengthened for the most part on Thursday, as lingering optimism over economic reopening outweighed concerns over a rise in coronavirus cases.

SHANGHAI, Jun 18 (SMM) – SHFE nonferrous metals strengthened for the most part on Thursday, as lingering optimism over economic reopening outweighed concerns over a rise in coronavirus cases.

 

Lead advanced 1.3% to be the biggest gainer, zinc rose 0.7%, tin climbed 0.4% and copper added 0.3%, while nickel stayed flat. Aluminium retreated 0.4%.

 

For copper, aluminium and zinc, their contracts for August delivery overtook the July ones became the most actively traded.

 

On the LME, base metals rose across the board as of 18:17 Beijing time, as oil prices resumed their rally.

 

A Chinese Centers for Disease Control and Prevention expert said at a news conference Thursday that a coronavirus outbreak in Beijing, which saw 21 new cases confirmed on Wednesday and 31 the day before, was now under control.

 

US jobless claims data is set to come out tonight, offering an update on the pace of the labor market’s recovery from the pandemic. Economist polled by Dow Jones expected a total of 1.30 million new filings for the week ending June 13, a decline from 1.54 million from the week prior.

 

Copper: The most traded contract for August delivery on the SHFE hovered in a tight range around the upper Bollinger band during the daytime session, holding onto overnight gains to close 0.26% higher at 46,760 yuan/mt. Its discount against the July contract came in at 160 yuan/mt, with little change to fundamentals which remain positive. With support at the five-day moving average, the contract is likely to try to break above the 47,000 mark.

 

Aluminium: The most liquid SHFE contract for August delivery moved in a tight range during the daytime session, failing to recover from overnight losses to close 0.4% lower at 13,555 yuan/mt, as SMM data showed that social inventories of primary aluminium ingots in China registered a much smaller decline this week. Fears of an end to the inventory decline amid the influx of imported cargoes and the release of invisible stockpiles, will limit upside in SHFE aluminium, deterring it from crossing the 14,000 mark.

 

Zinc: The most active contract on the SHFE for August delivery traded in a small range of 50 yuan/mt during the daytime session, and held onto overnight gains to close 0.73% higher at 16,625 yuan/mt. It is unlikely to stage a substantial pullback tonight, as market optimism stemming from slow mine resumption outweighs fears of a second wave of coronavirus outbreaks.

 

Nickel: The most traded SHFE contract for August delivery recovered from earlier losses to close flat at 103,250 yuan/mt, as longs and shorts diverged. It is expected to remain between the upper and middle Bollinger bands tonight.

The market has barely reacted to the implementation of Indonesia’s revised mining law on June 17. The new law allows miners building smelters to export ore for the next three years, but stipulates that the government can rule against the export of specific ores under a separate regulation.

 

Lead: The most active SHFE July contract advanced 1.26% to end at 14,485 yuan/mt, after hitting a two-week peak of 14,500 yuan/mt earlier in the session. It is likely to remain firm tonight if its LME counterpart extends its gains.

                                                                               

Tin: Longs lifted the most active SHFE August contract during the daytime session, which closed 0.38% higher at 138,490 yuan/mt after hovering in a tight range around the flatline in overnight trading. Pressure is seen at a previous high of 139,500.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
il y a 2 minutes
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
Lire la suite
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
High spot prices caused by high premiums; secondary copper rod enterprises maintain yesterday's quotes unchanged [SMM Secondary Copper Daily Review]
il y a 2 minutes
La fonderie de cuivre Nchanga de Vedanta KCM reprend ses activités après maintenance
il y a 48 minutes
La fonderie de cuivre Nchanga de Vedanta KCM reprend ses activités après maintenance
Lire la suite
La fonderie de cuivre Nchanga de Vedanta KCM reprend ses activités après maintenance
La fonderie de cuivre Nchanga de Vedanta KCM reprend ses activités après maintenance
SMM, 22 septembre : Selon des médias étrangers du 21 septembre, la filiale zambienne de Vedanta Resources, Konkola Copper Mines (KCM), a annoncé que sa fonderie de cuivre de Nchanga a repris ses activités après plus de trois mois de travaux de maintenance et de réparation. La fonderie a été mise en service en 2010 avec un investissement de construction d'environ 350 millions de dollars et une capacité de production annuelle de 311 000 tonnes de cuivre. La maintenance à l'arrêt devait initialement durer 60 jours, mais après l'identification de travaux de réparation critiques supplémentaires lors d'inspections détaillées, la période de maintenance a été prolongée à 106 jours, avec des coûts de rénovation d'environ 40 millions de dollars. Il s'agissait également de la première grande révision de la fonderie en huit ans. Les données du ministère zambien des Mines montrent que la production de cuivre de KCM en 2025 s'élevait à 80 200 tonnes. Cette maintenance s'inscrit dans la stratégie globale de modernisation des équipements de l'entreprise, et KCM prévoit d'augmenter sa production de cuivre à 300 000 tonnes par an d'ici 2030. Parallèlement, le gouvernement zambien s'efforce de développer l'industrie du cuivre du pays, prévoyant de faire passer la production nationale de cuivre de 890 300 tonnes en 2025 à 3 millions de tonnes d'ici 2031. La Zambie est actuellement le deuxième producteur de cuivre d'Afrique.
il y a 48 minutes
【Flash | Les perturbations météorologiques maintiennent l'offre de molybdène chilien sous tension】
il y a 1 heure
【Flash | Les perturbations météorologiques maintiennent l'offre de molybdène chilien sous tension】
Lire la suite
【Flash | Les perturbations météorologiques maintiennent l'offre de molybdène chilien sous tension】
【Flash | Les perturbations météorologiques maintiennent l'offre de molybdène chilien sous tension】
SMM a appris auprès de l'équipe d'intelligence de marché d'un grand opérateur minier étranger que des précipitations supérieures à la normale et des conditions météorologiques sévères dans certaines régions d'Amérique du Sud en juillet et août ont perturbé les calendriers de production et de maintenance de certaines mines. Les opérations régionales se sont améliorées en septembre, mais l'offre minière est restée limitée. Certaines mines de cuivre-molybdène doivent encore faire face à des exigences de maintenance post-météorologiques, ce qui pourrait continuer à restreindre l'offre chilienne de molybdène en tant que sous-produit et soutenir des prix élevés du molybdène à l'étranger.
il y a 1 heure