The epidemic situation has improved, major European car factories have resumed production, and the resumption time for most factories in the United States has not yet been determined.

Publié: May 08, 2020 15:41 (GMT+8)

SMM5, March 8: due to the unprecedented impact on the global auto industry due to the new crown epidemic, various countries have experienced varying degrees of shutdown of automobile factories, benefiting from China's rapid and effective epidemic control measures. According to information from the Ministry of Industry and Information Technology, as early March, the reinstatement rate of major domestic automakers has reached 90%, and the employee reinstatement rate has reached 70%.

Due to the lack of timely prevention and control of the epidemic in foreign countries, coupled with loose measures, the number of virus infections in Europe and the United States has soared in a short period of time, indirectly affecting the production of automobiles. Most of the world's large automakers are developed countries such as Europe, the United States, Japan and South Korea. Compared with China, foreign car factories have been hit even harder. At one point, more than 150 factories around the world were temporarily closed in April.

As the epidemic prevention and control in European countries achieved phased results, epidemic prevention measures have been gradually relaxed, and some car factories resumed production in April.

On April 20, with the resumption of work at Volkswagen's Zweicao factory, it has gradually opened the curtain on the resumption of work at the European car factory, and the Zweicao factory will also have Volkswagen's new pure electric cars off the line, marking the beginning of a new era for Volkswagen. But production capacity is much lower than normal, producing 50 vehicles a day, 1/3 of what it was before the shutdown. Delivery of the model is scheduled to begin this summer.

Earlier, the president of the Volkswagen union said it was a very clear signal for the industry as a whole to restart. Car factories that have been shut down since March will resume work one after another as the number of new confirmed cases of pneumonia in Europe and the United States slows down.

According to data released by the Robert Koch Institute of the German Agency for Disease Control and Prevention on the 6th, as of 00:00 on the same day, Germany had 947 new confirmed cases, a total of 164807 confirmed cases, 165 new deaths, 6996 cumulative deaths, and 2300 new cured cases, with a cumulative cure of 137400 cases. At the same time, the German federal government and state governments reached a new agreement on the 6th to further relax restrictions to deal with the new crown epidemic, but retain the provisions on maintaining social distance and wearing masks.

Several factories under German brands were reopened in April as a result of relaxed epidemic prevention measures. Volkswagen's Bratislava plant in Slovakia also reopened on April 20, the Wolfsburg plant was reopened on April 27, and Volkswagen's main factories in Europe have largely resumed production.

Daimler, the parent company of Mercedes-Benz, has allowed powertrain plants in Stuttgart and Berlin to take the lead in resuming production since April 20. As of April 30, major German factories, including the Sindfengen general plant and the Bremen plant, had resumed work.

BMW had previously announced in early April that it would extend the shutdown period to April 30. BMW's Dingfen plant in Bavaria is expected to resume work on May 11, while BMW's most important production sites, including the Munich plant, the Leipzig plant and the mini-plant in Oxford, UK, will gradually resume production after May 18.

French car company Renault restarted production plans at its Forlan plant on April 27th. The factory's main model is the electric car Zoe, which beat Tesla Model 3 to become the top seller of electric cars in 2019 with a subsidy of less than 19000 euros. Renault's Dacia brand is as early as April 21 to facilitate a full resumption of work in Romania.

On May 7, local time, the cumulative number of confirmed cases of New Crown pneumonia in the United States was the largest in the world, with more than 1.29 million cases, reaching 1291222 cases, and more than 76000 cases of death, reaching 76894 cases. It is reported that with the Trump White House administration blindly adhering to the policy of reviving the economy, the whole society of the United States is gradually resuming the policy of social blockade, and US university experts predict that the number of people infected with the new crown pneumonia in the United States will continue to rise. In addition, New York Governor Cuomo also said that Trump's full recovery of the economy, and even the lifting of the ban on wearing masks, will pose a greater epidemic challenge for the United States.

After some efforts in Europe, some car factories finally returned to work, but the epidemic in the United States is still serious. according to relevant reports, since General Motors, Ford, Fiat Chrysler and other car companies in the United States stopped production in March, they are striving for a partial resumption of production on May 18. The automakers set out to work with the United Auto Workers Union to develop a set of safety rules to prevent the epidemic, but details have not yet been worked out.

SMM-- China Tungsten Industry Market and Application Summit Forum

Seminar on the Application of cemented Carbide Market in China

On July 8, Zhuzhou, China cordially invites you to discuss the great plans of the industry.

Scan the code to sign up for this meeting

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
Aterian fait état de ventes de minerai 3T plus élevées au Rwanda ; les marges commerciales restent des estimations
02 Oct 2026 16:26 (GMT+8)
Aterian fait état de ventes de minerai 3T plus élevées au Rwanda ; les marges commerciales restent des estimations
Lire la suite
Aterian fait état de ventes de minerai 3T plus élevées au Rwanda ; les marges commerciales restent des estimations
Aterian fait état de ventes de minerai 3T plus élevées au Rwanda ; les marges commerciales restent des estimations
[SMM Tantalum Flash] Les résultats intermédiaires d'Aterian, publiés le 30 septembre, font état de 1,341 million de livres sterling de revenus de ventes de tantale et d'autres minerais pour le semestre clos au 30 juin 2026, contre 20 000 livres sterling un an plus tôt. Le bénéfice brut s'élève à 522 000 livres sterling, tandis que le groupe a enregistré une perte avant impôts de 568 000 livres sterling. Son activité commerciale au Rwanda a déployé environ 2,18 millions de dollars américains de fonds de roulement via des achats en coentreprise. La direction a évalué le potentiel de ventes de ces achats à 2,78 millions de dollars américains, mais a précisé que cette évaluation notionnelle ne constitue pas un revenu comptabilisé supplémentaire. Le bénéfice commercial brut implicite de 602 000 dollars américains est également une estimation de la direction, dépendant des ventes réalisées, des analyses, des prix obtenus, des coûts et de la répartition des bénéfices de la coentreprise. Aterian a indiqué que les inspections de traçabilité ont limité les fournisseurs et les volumes. La société détenait 131 000 livres sterling de trésorerie au 30 juin ; son objectif d'augmentation des volumes commerciaux à partir du quatrième trimestre dépend toujours de l'exécution et du financement.
02 Oct 2026 16:26 (GMT+8)
Les points d'échantillonnage de Tusker au Malawi indiquent une dominance d'ilménite
02 Oct 2026 16:23 (GMT+8)
Les points d'échantillonnage de Tusker au Malawi indiquent une dominance d'ilménite
Lire la suite
Les points d'échantillonnage de Tusker au Malawi indiquent une dominance d'ilménite
Les points d'échantillonnage de Tusker au Malawi indiquent une dominance d'ilménite
[SMM Titane Flash] Tusker Minerals a rapporté le 30 septembre que l'échantillonnage de suivi sur son projet Mzimba, dans le nord du Malawi, avait modifié son interprétation géologique. Le titane magnétique a dépassé l'équivalent rutile calculé dans 112 des 149 échantillons de sol régionaux, indiquant un système à dominante ilménite avec du rutile localisé. Trente-trois échantillons de tranchées peu profondes n'ont pas montré de rutile à haute teneur persistant en profondeur. Tusker a déclaré que les résultats ne justifient pas un programme de forage immédiat axé sur le rutile sur les anomalies de la phase 1. Ce résultat affaiblit le scénario spécifique d'exploration de rutile premium suggéré par des échantillons sélectionnés antérieurs. Il n'établit pas de ressource minérale et ne démontre pas que l'ilménite pourrait être exploitée de manière rentable. Tusker réévaluera son modèle géologique avant de décider de la poursuite des travaux à Mzimba ; son capital et son attention technique à court terme restent concentrés sur le Cameroun. La composition minérale et la continuité des teneurs doivent encore être établies avant que le potentiel en matières premières du projet puisse être évalué.
02 Oct 2026 16:23 (GMT+8)
【Flash | PhotonLink de Coherent ouvre la voie à une montée en puissance commerciale du phosphure d'indium (InP)】
02 Oct 2026 14:34 (GMT+8)
【Flash | PhotonLink de Coherent ouvre la voie à une montée en puissance commerciale du phosphure d'indium (InP)】
Lire la suite
【Flash | PhotonLink de Coherent ouvre la voie à une montée en puissance commerciale du phosphure d'indium (InP)】
【Flash | PhotonLink de Coherent ouvre la voie à une montée en puissance commerciale du phosphure d'indium (InP)】
Coherent a lancé PhotonLink, une plateforme d’optique intégrée pour les infrastructures d’IA intégrant des lasers au phosphure d’indium (InP), la photonique sur silicium, des détecteurs et des modules optiques. L’entreprise a révélé plus de 10 engagements CPO, plus de 10 engagements NPO et plus de cinq projets de connectivité puce à puce, avec des clients phares et des accords à long terme conclus pour le CPO et le NPO. Le chiffre d’affaires devrait commencer à monter en puissance au quatrième trimestre 2026. Coherent a expédié plus de 300 millions de lasers InP et étend sa capacité de fabrication d’InP sur plaquettes de 6 pouces pour soutenir cette montée en charge. Le portefeuille de clients donne un signal de demande commerciale plus clair pour les dispositifs InP et les matériaux en amont, bien que les capacités supplémentaires et la consommation d’indium n’aient pas été divulguées.
02 Oct 2026 14:34 (GMT+8)