[SMM analysis] the operating rate of aluminum sheet and strip increased significantly in March compared with the previous month, and fell back in April into an established fact.

Publié: Apr 13, 2020 19:01 (GMT+8)
SMM conducted a survey of the aluminum plate and strip market in March and learned that the average weighted operating rate of China's aluminum plate and strip industry was 62.25% in March, up 13 percentage points from the previous month, down more than 10 percentage points from the same period last year, and is expected to fall slightly to 61 per cent in April 2020.

SMM conducted a survey of the aluminum plate and strip market in March and learned that the average weighted operating rate of China's aluminum plate and strip industry was 62.25% in March, up 13 percentage points from the previous month, down more than 10 percentage points from the same period last year, and is expected to fall slightly to 61 per cent in April 2020.

Source: SMM

At the beginning of March, most of the production conditions of plate and strip enterprises in the industry returned to normal, and some enterprises were still in a state of semi-shutdown due to less orders and slow rework of employees. The start-up rate in March was higher than that in February, mainly due to the fact that most of the plate and belt enterprises in the industry were on holiday in February due to the influence of the epidemic situation, and the start-up rate was relatively low in March, while in March, with the gradual resumption of work and resumption of production, the start-up rate was also relatively higher, and some of the order production plans delayed during the February holiday were released in March, resulting in a significant increase in the start-up rate in March.

Last year, it is still worse than last year, and the terminal consumer market is limited by the weak performance of the epidemic. According to the order category, the performance of building plate and 3C electronic material is relatively stable, the performance of packaging orders such as tank material is relatively weak, the worst is automobile plate, the domestic automobile industry is depressed in March, and foreign car factories in Japan, Europe and the United States and Europe and the United States have stopped production, which has a direct impact on the export of relevant automobile aluminum and domestic trade orders. In addition, most of the aluminum plate and strip enterprises reported that the severity of the epidemic abroad gradually escalated in the middle and late March, and export orders were significantly affected. Customers have withdrawn orders and delayed pick-up of shipments, or customers have been affected by the foreign epidemic and then reduced their orders for cooperation with themselves. In the aspect of finished product inventory, most of the enterprises feedback that their finished product inventory is high, mainly due to the slow pick-up of end customers, and there is obvious pressure on their own funds.

As far as April is concerned, the current corporate feedback is not optimistic. First of all, the export proportion of large plate and strip enterprises in Shandong, Henan, and Fujian is relatively high, between 30% and 50% as a whole, and about 20% of the indirect exports of small and medium-sized enterprises also exist. However, the epidemic situation has not yet appeared an inflection point overseas, and there is even a further serious trend. Overseas countries have adopted measures to seal off countries and ports, and it seems to have become an established fact that export orders continue to decline from April to May. Against the background of weak domestic trade orders, Foreign trade has made matters worse, and the start-up rate in April is expected to be lower than in March.

(SMM Xuman 021-51595898)

 

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
il y a 3 minutes
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
Lire la suite
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
【SMM Aluminum Flash News】Global Aluminum Can Recycling Rate Rises to 76%, Targeting 80% by 2030
The 2026 Global Beverage Container Recycling Dataset released by the Global Beverage Can Circularity Alliance shows that the global aluminum can recycling rate has increased from 74.8% to 76%, while the collection rate reached 77%, remaining ahead of other major beverage packaging formats. PET bottles recorded collection and recycling rates of 69% and 54%, respectively, compared with 56% and 51% for glass bottles. The dataset covers markets representing at least 84% of global sales for each packaging format. The industry is targeting an 80% recycling rate for used beverage cans by 2030, followed by a goal of approaching 100% by 2050. India, Indonesia, Saudi Arabia, Türkiye and Nigeria are among the emerging beverage markets highlighted for further improvements in collection and recycling systems.
il y a 3 minutes
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
il y a 3 minutes
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
Lire la suite
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
【SMM Aluminum Flash News】Cameroon’s Minim Martap Bauxite Project Faces Funding Setback, First Shipment Delayed
Canyon Resources’ Minim Martap bauxite project in Cameroon faces fresh uncertainty after AFG Bank Cameroon suspended further drawdowns from the project’s syndicated financing facility on August 24, pending a review of its development schedule, financial model and economic assumptions. Canyon has confirmed that Phase 1 will not meet its previous timetable and has withdrawn its Q4 2026 first-shipment target, with no new date announced. Minim Martap has a mineral resource of around 1.1 billion tonnes and an ore reserve of 144 million tonnes, averaging approximately 51% alumina and 2% silica. Canyon held around AUD 31 million in cash at the end of July, while approximately $75 million had already been drawn from the CFA 82 billion syndicated facility. The company is reducing non-essential spending while reassessing the project’s development and funding pathway.
il y a 3 minutes
【SMM Info Flash Aluminium】Caterpillar lance trois nouvelles machines en Inde pour les applications minières et d'infrastructure
il y a 4 minutes
【SMM Info Flash Aluminium】Caterpillar lance trois nouvelles machines en Inde pour les applications minières et d'infrastructure
Lire la suite
【SMM Info Flash Aluminium】Caterpillar lance trois nouvelles machines en Inde pour les applications minières et d'infrastructure
【SMM Info Flash Aluminium】Caterpillar lance trois nouvelles machines en Inde pour les applications minières et d'infrastructure
Caterpillar a lancé la pelle hydraulique Cat 355, le bouteur Cat D5 et la niveleuse Cat 120 GC à bauma CONEXPO India 2026, ciblant les applications minières, les infrastructures lourdes et la construction routière. La Cat 355 est équipée d'un moteur C13B et d'un système électrohydraulique avec des godets allant jusqu'à 4,5 m³, tandis que le Cat D5 est propulsé par un moteur C7.1 de 170 ch et dispose d'une lame de 4,3 m³. La Cat 120 GC est principalement conçue pour l'entretien routier et les travaux de finition. Ces lancements élargissent encore l'offre d'équipements de Caterpillar pour les secteurs minier et des infrastructures en Inde.
il y a 4 minutes