Update: China January NEV production dropped 52.3% from a year ago

Publié: Feb 17, 2020 17:21 (GMT+8)
China’s production of new energy vehicles dropped in the first month of 2020, as producers shut or trimmed output due to the Lunar New Year holiday and continued market weakness

(Added a chart of battery makers)

SHANGHAI, Feb 17 (SMM) – China’s production of new energy vehicles dropped in the first month of 2020, as producers shut or trimmed output due to the Lunar New Year holiday and continued market weakness.

 

About 48,000 NEVs produced in China obtained qualification certificates last month, down 52.3% from a year ago, according to SMM data. Passenger vehicles accounted for 43,000 units, or 88%, while 2,700 were buses, taking up 5.6%. The rest 3,100 were special vehicles, accounting for 6.4% of the total.

SMM data also revealed that 2.3GWh of power batteries were installed in January, down 53.5% year on year.

 

As the market remained lacklustre since the second half of last year, most of electric vehicle battery producers in China began their Lunar New Year holiday in early or middle of January, while some leading companies kept some of their production lines running.

 

A high statistical base also contributed to the sharp year-over-year decline in NEV production, as producers ramped up production in the same month of 2019, in anticipation of a cut in subsidies.

 

Chinese EV and battery producers were in low gear since the second half of 2019, as sales took a hit after the government sharply scaled back NEV subsidies. That, together with the coronavirus epidemic outbreak, is set to substantially subdue NEV production earlier this year, before the market recovers later in the year.

 

In terms of battery types, capacity of installed ternary batteries was 1.58GWh in January, accounting for 68.2% of the total installed EV batteries, while lithium iron phosphate batteries accounted for 31.2% or 0.72GWh, according to SMM data.

About 1.5GWh was installed in PVs, which primarily use NCM batteries, while buses and special vehicles favour LFP batteries. About 0.45GWh of batteries was installed in busses last month, while 0.17GWh was for special vehicles.

 

Source: SMM

 

In January, CATL, BYD and Guoxuan High-tech remained the top three battery makers in the Chinese market, and CATL maintained its first position with a 57.3% market share. The beginning of battery supply from South Korea’s LG and Japan’s Panasonic to Tesla, meanwhile, took the two battery makers to the fourth and fifth places.

The EV battery market concentration improved further last month, with CR10 at 94%, CR5 at 82.2% and CR3 at 76.3%.

 

Source: SMM

 

The latest SMM survey showed that most of battery makers in China have delayed their resumption by one to two weeks amid the epidemic outbreak. Factories in the top two EV battery producing hubs of south China’s Guangdong and east China’s Jiangsu, are required to remain shut until they get the approval from authorities. Workers, meanwhile, are required to isolate themselves for 14 days after they return from holidays.

SMM expects the broad recovery of Chinese EV battery makers to be at the end of February, with operating rates for the month remaining low.

 

China’s Association of Automobile Manufacturers (CAAM) said last week the virus will deliver a “huge shock” to the car industry, causing a worse impact than the SARS epidemic did in 2003. Demand for cars and will falter sharply in the near term, but is likely to see a brief consumption boom after the epidemic is over. The painful start to the year, however, is casting a shadow over the full-year performance for the Chinese industry in 2020.

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
[SMM Express Métaux Précieux]
il y a 2 heures
[SMM Express Métaux Précieux]
Lire la suite
[SMM Express Métaux Précieux]
[SMM Express Métaux Précieux]
Une équipe de recherche conjointe thaïlandaise et chinoise a mis au point un film photocatalytique à hétérostructure In₂S₃-Ta₂O₅ co-dopé au platine (Pt) et au ruthénium (Ru) pour dégrader les polluants organiques de type colorants sous lumière visible. Le matériau optimisé a montré de bonnes performances lors des tests de dégradation de la rhodamine B, éliminant environ 92,0 % du polluant en 120 minutes.
il y a 2 heures
[SMM Express Métaux Précieux]
il y a 2 heures
[SMM Express Métaux Précieux]
Lire la suite
[SMM Express Métaux Précieux]
[SMM Express Métaux Précieux]
Une demande de brevet américain (n° de publication US20260275453A1) intitulée « Method for Producing Palladium from Ag Slime » par Korea Zinc a été publiée le 17 septembre. Le brevet vise à améliorer l'efficacité de la récupération du palladium (Pd) à partir des boues d'argent, un sous-produit du raffinage de l'argent. Le procédé proposé consiste à séparer l'or par dissolution acide, à neutraliser la solution contenant du palladium pour former un précipité contenant de l'oxyde de palladium, à lixivier le palladium et le platine (Pt) avec de l'acide chlorhydrique, suivi d'une précipitation des chlorures, et enfin à achever la purification et la récupération du palladium.
il y a 2 heures
[SMM Express Métaux Précieux]
il y a 2 heures
[SMM Express Métaux Précieux]
Lire la suite
[SMM Express Métaux Précieux]
[SMM Express Métaux Précieux]
À mesure que le vieillissement de la population mondiale s'accélère, la demande médicale pour les maladies cardiovasculaires, les troubles neurologiques et la douleur chronique ne cesse de croître. Le platine, grâce à son excellente biocompatibilité, sa résistance à la corrosion, sa conductivité électrique et sa visibilité aux rayons X, est devenu un matériau essentiel pour les dispositifs médicaux avancés. Des stents coronaires et stimulateurs cardiaques implantables aux implants cochléaires et interfaces cerveau-machine, les applications du platine s'étendent de plus en plus vers les technologies médicales de haute précision, miniaturisées et implantables à long terme. En médecine cardiovasculaire, le platine est principalement utilisé dans les cathéters, le positionnement des stents et la thérapie électrophysiologique cardiaque.
il y a 2 heures
Update: China January NEV production dropped 52.3% from a year ago - Shanghai Metals Market (SMM)