[SMM Thread Analysis] under pressure at both ends, the electric furnace factory re-enters the "loss bog".

Publié: Jul 23, 2019 17:35

Since July, even though there have been more than expected macro data and "endless" production restrictions, thread spot prices have remained indifferent to successive attacks by precipitation and high temperatures.

However, at the same time, scrap prices are like God's help. According to SMM statistics, the spot prices of scrap steel have risen by 70 to 140 yuan / ton from July 1 to now. Among them, the central and southern regions, where the focus of production restriction is Tangshan and the production capacity of electric arc furnaces is relatively concentrated, have increased the most, reaching 130 to 140 yuan / ton.

In the spot price is tepid, and the cost-end price goes up all the way, the electric arc furnace steel mill enters the loss state again. According to the SMM data model, based on the price of 2370 yuan / ton Changzhou scrap steel without tax, as of today, the loss per ton of steel in electric arc furnace steel plant has reached 38.50 yuan.

According to SMM research, there are regional differences in the profits of electric arc furnace steel mills. Because the scrap price of electric arc furnace in southwest China is relatively low, and the spot price of thread is at the high level in the whole country, the profit of 70 yuan per ton steel is still in the state of full production, while in East China, when the steel price and cost are not dominant, most steel enterprises still produce normally, but some steel enterprises choose to reduce production because of the aging of equipment and other problems. On the other hand, the profit situation of electric arc furnace steel enterprises in South China is even more unoptimistic. According to the feedback of many steel enterprises, they are in a state of loss for a long time. At present, the loss per ton of steel is about 30 to 60 yuan, and the operating rate has been maintained at 50 percent to 70 percent for a long time.

Overall, although the current market bullish sentiment is still dominant, the willingness to take the initiative to reduce production is not strong, but after a wave of increases in late June, steel prices have always been in a weak consolidation state since July. If there is no sign of rising, the scope of production reduction in electric arc furnace steel mills may be expanded and the thread supply may be reduced.

[feedback on specific research]

Steel mill A (East China): from the beginning of the month to now scrap prices have risen by 100 yuan / ton, there is no profit, so production has been reduced again, and now the start-up rate is about 65%, but the price is still bullish in the future.

Steel mill B (East China): it still maintains normal production. At present, it has only a small profit of 30 to 50, and at the beginning of the month, it can still earn about 100 yuan per ton of steel.

Steel mill C (South China): the recent scrap steel rose by 70 to 80 yuan / ton, the order situation is not good, the sales situation directly put on the market is general. At present, there is no plan to resume production, and the starting rate is about 50%.

Steel mill D (South China): scrap steel has increased by about 170 yuan / ton so far at the beginning of the month, and a loss of 50 to 60 yuan per ton of steel has been incurred. At present, it still maintains 70% production, the order sales situation is not good, the recent rainy site start-up rate is low.

Steel mill E (southwest): it is still in full production, but since July, steel prices have fallen by 40 to 50 yuan per ton, while scrap steel has risen by more than 100 yuan, making profits rapidly compressed. Now the profit per ton of steel is 70 to 100 yuan.

 

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
L'Australie réexamine les droits antidumping sur l'acier galvanisé en provenance d'Inde, de Malaisie et du Vietnam dans un contexte de préoccupations liées au zinc
11 Sep 2026 18:30
L'Australie réexamine les droits antidumping sur l'acier galvanisé en provenance d'Inde, de Malaisie et du Vietnam dans un contexte de préoccupations liées au zinc
Lire la suite
L'Australie réexamine les droits antidumping sur l'acier galvanisé en provenance d'Inde, de Malaisie et du Vietnam dans un contexte de préoccupations liées au zinc
L'Australie réexamine les droits antidumping sur l'acier galvanisé en provenance d'Inde, de Malaisie et du Vietnam dans un contexte de préoccupations liées au zinc
Le 9 septembre 2026, l'Australie a lancé son deuxième réexamen au titre du crépuscule des mesures antidumping visant les tôles d'acier galvanisé originaires d'Inde, de Malaisie et du Vietnam, et a ouvert séparément un réexamen au titre du crépuscule des mesures compensatoires sur les importations en provenance d'Inde. Le réexamen couvre la période juillet 2025-juin 2026, le rapport final étant attendu pour le 11 février 2027. L'acier galvanisé étant le principal secteur d'utilisation finale du zinc, ces mesures affectent directement les coûts d'exportation et la compétitivité, avec un impact potentiel sur la demande intérieure de zinc et la chaîne d'approvisionnement en Australie. Le maintien des droits offrirait une certaine protection aux capacités nationales de production d'acier et de revêtement, tandis que leur suppression pourrait accroître les importations à bas prix et affecter la consommation régionale de zinc. L'issue finale reste soumise à la décision des autorités.
11 Sep 2026 18:30
Le projet d'expansion de 200 millions de dollars de JCC Hongyuan Copper vise à porter la capacité à 550 000 tonnes d'ici 2027
7 Sep 2026 15:43
Le projet d'expansion de 200 millions de dollars de JCC Hongyuan Copper vise à porter la capacité à 550 000 tonnes d'ici 2027
Lire la suite
Le projet d'expansion de 200 millions de dollars de JCC Hongyuan Copper vise à porter la capacité à 550 000 tonnes d'ici 2027
Le projet d'expansion de 200 millions de dollars de JCC Hongyuan Copper vise à porter la capacité à 550 000 tonnes d'ici 2027
Le projet d'expansion de 300 000 tonnes par an de cathodes de cuivre de JCC Hongyuan Copper, filiale de Jiangxi Copper Corporation, est entré le 4 septembre dans la phase de consultation publique préalable à l'approbation de son étude d'impact environnemental, avec un investissement total d'environ 1,416 milliard de yuans. Le projet devrait démarrer en septembre 2026 et s'achever en décembre 2027. Une fois terminé, la capacité totale de JCC Hongyuan passera de 250 000 à 550 000 tonnes.
7 Sep 2026 15:43
Le yen japonais s'apprécie, l'USD/JPY passe sous 159 dans un contexte de spéculation sur une intervention
3 Sep 2026 19:00
Le yen japonais s'apprécie, l'USD/JPY passe sous 159 dans un contexte de spéculation sur une intervention
Lire la suite
Le yen japonais s'apprécie, l'USD/JPY passe sous 159 dans un contexte de spéculation sur une intervention
Le yen japonais s'apprécie, l'USD/JPY passe sous 159 dans un contexte de spéculation sur une intervention
[SMM Express Métaux Précieux] Le yen japonais a fortement grimpé lors de la séance de mercredi, l'USD/JPY passant sous 159 et clôturant en baisse de 0,92 % à 158,69, alimentant les spéculations sur une intervention monétaire japonaise. L'indice du dollar a également fortement reculé, un environnement de dollar plus faible soutenant les métaux précieux.
3 Sep 2026 19:00
[SMM Thread Analysis] under pressure at both ends, the electric furnace factory re-enters the "loss bog". - Shanghai Metals Market (SMM)