Exclusive: China's base metals output in Jul

Publié: Aug 07, 2018 16:17 (GMT+8)
A roundup of China’s base metals output in July through SMM survey of major producers

SHANGHAI, Aug 7 (SMM) – This is a roundup of China’s base metals output in July. SMM surveyed major producers in the market to obtain first-hand information for calculation.

Copper

China’s output of copper cathode in July grew 0.5% from June and stood at 725,800 mt. This is up 14.7% on the year. Year-to-date output through July increased 13.1% on the year to 5.05 million mt.

Higher productivity at some smelters and new capacities accounted for the growth in July, though maintenance and environmental initiatives affected output across Fuye Group, Minmetals Copper (Hunan), Zhangjiagang United Copper and Yuguang Gold & Lead. A combined 280,000 mt/year of new capacities from Henan Zhongyuan Gold Smelter, Tongling Jinchang Copper Smelter and Yuguang Gold & Lead yielded output. This compared to the 1.23 million mt/year of new refining capacity scheduled this year. While supply pressures are likely to grow, concerns over supplies of raw materials continue to linger.

In August, Fuye Group and Minmetals Copper (Hunan) will return from maintenance. This, combined with the release of new capacities, is likely to grow output to 743,600 mt, up 2.5% from July and 10.3% on the year. Total output in the first eight months of the year is expected to grow 12.8% year on year to stand at 5.8 million mt.

Alumina

China produced 5.91 million mt of alumina in July, up 2.4% from a year ago. Daily average output fell 4.1% from June to 191,000 mt as tight bauxite supplies and lower alumina prices prompted many producers, including Chalco Shanxi, Sanmenxia Kaiman and Shanxi Huaxing, to cut output or undertake maintenance. Alumina prices fell to cost levels in north China.

Output is likely to grow to 6.06 million mt in August, with daily average output likely to expand to 196,000 mt as most producers recover from output cuts or complete maintenance. But Chalco Shanxi and Sanmenxia Kaiman will continue to reduce production.

Aluminium

Chinese output of primary aluminium increased 0.2% on a yearly basis to 3.13 million mt in July. This marked the first year-on-year growth in 2018. In the first seven months of the year, output fell 2.2% from a year ago and stood at 20.94 million mt.

As of the end of July, the annualised operating capacity stood at 37.5 million mt, idled capacity registered at 4.4 million mt, and operating rates stood at 89.5%. Operating capacity in July fell 200,000 mt from June as some high-cost capacity across Henan, Shandong, Shaanxi and Gansu provinces shut or was replaced, and as new capacity in Inner Mongolia and Guangxi province was commissioned slowly.

Operating capacity in August is likely to grow slightly from July as thin profit margins and restrictions on construction of captive power plants affect the commissioning of new capacity.

SMM expects output in August to grow 2.2% on the year to 3.13 million mt as supply-side reforms affected output across Shandong, Xinjiang, Inner Mongolia and other provinces last year.

Nickel

Nickel production rose 4.7% on the month and stood at 12,400 mt in July. This is down 9.7% year on year. More working days and better profitability at smelters in south China accounted for the month-on-month growth.

Output during January-July fell 8.3% from the same period last year, and came in at 83,700 mt.

Domestic nickel production is likely to stand at 12,500 mt in August as operating rates are likely to remain largely flat on a monthly basis, according to an SMM survey.

Nickel pig iron (NPI)

NPI output in July increased 4.5% from June to 34,000 mt in nickel content. Producers resumed production after the first round of environmental reviews, but limited capacity release and extended checks in Jiangsu limited output growth in July. Production dipped 3.5% from a year ago.

In July, high-grade NPI output gained 5.1% month on month to 29,700 mt in nickel content and low-grade NPI output grew 0.6% on the month to 4,300 mt in nickel content.

Overall NPI production during January-July stood at 253,900 mt in nickel content, up 13.4% year on year.

Output in August is expected to expand 8.9% on the month to 37,000 mt, as output resumption continues. 

Nickel sulphate

China produced 28,500 mt of nickel sulphate in physical volumes in July. This translates to 6,264 mt in metal content, down 1.6% from June. Output at SMM’s surveyed producers stood at 27,100 mt in physical volumes. Domestic production during January-July registered at 235,300 mt, up 38% year on year.

Output in July might have already fallen to a low of 2018 as environmental probes started to ease. A producer in south China is likely to operate normally in August after it resolved environmental issues and resumed production from mid-July. Other producers that faced environmental restrictions, such as those in Jiangxi, pushed for resumption.

Production is expected to grow to 34,100 mt in August, or 7,503 mt in metal content, driven by output resumption in south China and output ramp-up at a producer in the north.

Zinc

Maintenance lowered output of refined zinc across Chinese smelters to 408,400 mt in July, down 21,700 mt or 5.1% from June. This is down 10.2% from July 2017. Total output in the first seven months of the year stood at 3.1 million mt, up 1.7% on the year.

High temperatures, the low season and losses drove some smelters to undertake maintenance in July, when SHFE zinc prices dipped to 20,000 yuan/mt.

Chihong Zinc & Germanium and Xing’an Copper & Zinc Smelting began maintenance in July, while output continued to decline across Baiyin Nonferrous Metals, Chifeng NFC Zinc Industry and Shaanxi Dongling Industry & Trade Group.

Output of refined zinc in August is expected to grow 18,500 mt or 4.5% from July but fall 4.3% on the year to stand at 426,900 mt. Most smelters will recover from maintenance in August, except several smelters such as Bayannur Zijin Nonferrous Metals. Year-to-date output through August is likely to gain 0.9% on the year.

Lead

China produced 255,500 mt of primary lead last month, up around 8% month on month, but down 10.2% year on year.

Production grew 19,000 mt from June as smelters in Henan’s Jiyuan city resumed operations at the start of July after environmental checks. The end of maintenance works at Jiangxi Jinde, Chifeng Shanjin Silver & Lead and Yunnan Mengzi Mining and Smelting also accounted for the increase.

But growth stood below an estimated 21,000 mt, affected by 15 days of maintenance at Yubei Gold & Lead, product structure adjustment at Zhuzhou Smelter and extended technical upgrading at Anhui Tongguan Nonferrous Metals. Environmental self-checks at smelters in Guangxi and Hunan provinces also lowered production.

We expect output of primary lead to increase further to 265,800 mt in August as the environmental factor eases.

Primary smelters in Jiyuan city resumed operations after environmental probes ended. Maintenance works concluded at Henan Zhicheng Refining, and technical overhauls also ended at Anhui Tongguan Nonferrous Metals. Smelters that were affected by checks in Yunnan and Guangxi are also likely to return online this month. These, and more working days in the month, will further grow lead production in August.

A unit glitch continues to affect production at Chihong Zinc & Germanium. Yubei Gold & Lead Group continues with maintenance works. Western Mining will close for 30 days of maintenance in the middle of August.

Tin

China’s output of refined tin in July remained largely flat from June levels, at 12,206 mt, as environmental probes lasted from June to the first half of July. Producers did not resume production until the second half of July. China Tin Group remained closed in July for annual maintenance and environmental issues.

Output is likely to grow to 13,200 mt in August as production recovers across China Tin Group and other producers. China Tin reopened from August 1.        

 

Déclaration sur la source des données : À l'exception des informations publiques, toutes les autres données sont traitées par SMM sur la base d'informations publiques, d'échanges avec le marché et en s'appuyant sur le modèle de base de données interne de SMM. Ils sont fournis à titre indicatif uniquement et ne constituent pas des recommandations décisionnelles.

Pour toute demande d'information ou pour en savoir plus, veuillez contacter : lemonzhao@smm.cn
Pour plus d'informations sur l'accès à nos rapports de recherche, veuillez contacter :service.en@smm.cn
Actualités Connexes
KGHM et South32 lancent une expansion de 725 millions de dollars américains à Sierra Gorda, augmentant la capacité de cuivre de 26 %
02 Oct 2026 16:31 (GMT+8)
KGHM et South32 lancent une expansion de 725 millions de dollars américains à Sierra Gorda, augmentant la capacité de cuivre de 26 %
Lire la suite
KGHM et South32 lancent une expansion de 725 millions de dollars américains à Sierra Gorda, augmentant la capacité de cuivre de 26 %
KGHM et South32 lancent une expansion de 725 millions de dollars américains à Sierra Gorda, augmentant la capacité de cuivre de 26 %
KGHM et South32 ont lancé les travaux d'une quatrième ligne de broyage à la mine de cuivre-molybdène de Sierra Gorda, dans la région d'Atacama au Chili. Cette expansion de 725 millions de dollars américains s'étalera sur trois ans à partir de janvier 2027, avec une achèvement prévu fin 2029 et une pleine production au second semestre 2030. La capacité de traitement du minerai augmentera de 26 %, passant de 131 000 tonnes par jour à 165 000 tonnes par jour. La production annuelle de cuivre devrait passer de 165 000 tonnes en 2025 à 195 000 tonnes, avec comme sous-produits 6 000 tonnes de molybdène, 58 000 onces d'or et 1,7 million d'onces d'argent. Le projet créera plus de 900 emplois directs et sera financé par les flux de trésorerie d'exploitation et l'endettement. Les coûts d'exploitation unitaires devraient baisser d'environ 10 %.
02 Oct 2026 16:31 (GMT+8)
Emerita prolonge l'examen final de l'EEP de la ceinture ibérique ouest, publication attendue dans les semaines à venir
02 Oct 2026 15:31 (GMT+8)
Emerita prolonge l'examen final de l'EEP de la ceinture ibérique ouest, publication attendue dans les semaines à venir
Lire la suite
Emerita prolonge l'examen final de l'EEP de la ceinture ibérique ouest, publication attendue dans les semaines à venir
Emerita prolonge l'examen final de l'EEP de la ceinture ibérique ouest, publication attendue dans les semaines à venir
Emerita Resources a fait le point sur l’étude de faisabilité préliminaire (EFP) de son projet polymétallique Iberian Belt West en Espagne, indiquant que l’étude est bien avancée mais reste en cours de révision technique finale. La société a précisé que le processus de révision a été élargi afin d’inclure une supervision technique et une assurance qualité supplémentaires avant publication. En conséquence, Emerita prévoit désormais la publication de l’EFP dans les semaines à venir plutôt que dans le délai précédemment annoncé. Iberian Belt West recèle une minéralisation en cuivre, zinc, plomb, or et argent et constitue l’un des principaux actifs en phase de développement d’Emerita en Espagne. L’EFP devrait fournir des précisions actualisées sur le plan minier proposé, la configuration du traitement, les besoins en capitaux, les coûts d’exploitation et l’économie du projet. Emerita a indiqué que ces travaux de révision supplémentaires visent à garantir la cohérence et l’exhaustivité des différentes disciplines techniques contribuant à l’étude avant sa finalisation. La société n’a pas annoncé de nouvelle date précise de publication, et aucune nouvelle donnée de production, de capital ou économique n’a été communiquée dans cette dernière mise à jour. Cette révision prolongée retarde la prochaine étape technique majeure pour Iberian Belt West, mais la société continue d’indiquer que l’EFP est proche de son achèvement. Pour le marché du cuivre, l’importance de l’étude dépendra du profil de production et de l’économie du projet qui seront finalement publiés, en particulier la contribution du cuivre par rapport aux autres métaux payables du projet. L’attention restera donc portée sur le calendrier de publication de l’EFP et sur la question de savoir si l’étude finale modifie sensiblement les perspectives de développement du projet.
02 Oct 2026 15:31 (GMT+8)
Cascadia recoupe 75,55 m à 1,19 % Cu au projet cuivre-or Carmacks
02 Oct 2026 15:27 (GMT+8)
Cascadia recoupe 75,55 m à 1,19 % Cu au projet cuivre-or Carmacks
Lire la suite
Cascadia recoupe 75,55 m à 1,19 % Cu au projet cuivre-or Carmacks
Cascadia recoupe 75,55 m à 1,19 % Cu au projet cuivre-or Carmacks
Cascadia Minerals a publié des résultats de forage supplémentaires issus de son programme d’exploration 2026 au projet de cuivre-or Carmacks, dans le Yukon, au Canada, de nouveaux forages d’extension élargissant la minéralisation de la zone 2000S au-delà des limites de la ressource minérale existante. Le sondage CD-26-058 a retourné 75,55 mètres titrant 1,19 % de cuivre, 0,97 g/t d’or, 10,4 g/t d’argent et 335 ppm de molybdène, soit l’équivalent de 2,18 % d’équivalent cuivre. L’intervalle comprenait 48,66 mètres titrant 1,61 % de cuivre, 1,39 g/t d’or, 15,1 g/t d’argent et 475 ppm de molybdène, soit l’équivalent de 3,03 % CuEq. Dans le même sondage, un intervalle à plus haute teneur de 14,50 mètres a retourné 2,30 % de cuivre, 2,68 g/t d’or, 29,5 g/t d’argent et 1 015 ppm de molybdène, soit l’équivalent de 5,08 % CuEq. Un second sondage, CD-26-059, a recoupé 93,99 mètres titrant 0,96 % de cuivre, 0,70 g/t d’or, 4,6 g/t d’argent et 919 ppm de molybdène, soit l’équivalent de 1,94 % CuEq. Cela comprenait 63,97 mètres à 1,26 % de cuivre, 0,96 g/t d’or, 6,3 g/t d’argent et 1 049 ppm de molybdène, soit l’équivalent de 2,52 % CuEq. Cascadia a indiqué que les derniers résultats continuent d’étendre la minéralisation de la zone 2000S au-delà des limites de la ressource minérale actuelle et mettent en évidence la nature à plus haute teneur de l’extension. Les intervalles de forage rapportés représentent des épaisseurs forées, les largeurs réelles étant estimées à environ 60–70 %. Les derniers résultats d’extension indiquent que la minéralisation de cuivre-or de la zone 2000S s’étend au-delà des limites de la ressource minérale actuelle de Carmacks. Les larges intervalles et les zones internes à plus haute teneur pourraient soutenir une future expansion de la ressource si des forages supplémentaires confirment la continuité. Cependant, les nouvelles intersections n’ont pas encore été intégrées dans une estimation actualisée des ressources minérales, ce qui signifie que leur impact final sur l’échelle du projet et la planification minière reste à déterminer.
02 Oct 2026 15:27 (GMT+8)
Exclusive: China's base metals output in Jul - Shanghai Metals Market (SMM)