Inventario de mineral de hierro en puerto y volumen de recogida en puerto a 20 de noviembre de 2026

Publicado: Nov 20, 2026 10:29 (GMT+8)

Según los últimos datos de SMM al 20 de noviembre, el inventario de mineral de hierro en 35 puertos principales de China totalizó 153,75 millones de toneladas, un aumento intermensual de 1,63 millones de toneladas, con una tendencia general al alza. El volumen diario promedio de retiro en puerto bajó 80.000 toneladas, hasta 3 millones de toneladas.

Las llegadas de mineral de hierro a puerto disminuyeron durante el período, pero con la caída de la producción de arrabio, el soporte de la demanda se debilitó y el inventario total continuó acumulándose. De cara a la próxima semana, se espera que las llegadas a puerto aumenten, mientras que el volumen de retiro podría seguir disminuyendo. Con más llegadas y menor retiro, es probable que el inventario portuario siga creciendo y la presión de existencias aumente aún más.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Las imágenes de este artículo contienen leyendas traducidas por IA solo como referencia.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
UK imposes new anti-dumping duties on South Korean hot-rolled steel plate
hace 1 minuto
UK imposes new anti-dumping duties on South Korean hot-rolled steel plate
Leer más
UK imposes new anti-dumping duties on South Korean hot-rolled steel plate
UK imposes new anti-dumping duties on South Korean hot-rolled steel plate
The UK Secretary of State has imposed a new anti-dumping measure on hot-rolled steel plate from South Korea following a Trade Remedies Authority (TRA) investigation. The TRA found that South Korean plate was dumped and caused injury to UK producers. Its Economic Interest Test was met for plate narrower than 2,500mm but not for the full scope. Although the UK can produce plate over 2,100mm, there is no sustained output above that width, so the Secretary of State narrowed the measure to plate up to 2,100mm, with duties of 7.04% to 23.07%. The case was initiated on 6 June 2025; the investigation period was 1 April 2024 to 31 March 2025 and the injury period 1 April 2021 to 31 March 2025. Source: GOV.UK.
hace 1 minuto
Hybar to build second rebar minimill in Arkansas for 1.1 billion USD
hace 1 minuto
Hybar to build second rebar minimill in Arkansas for 1.1 billion USD
Leer más
Hybar to build second rebar minimill in Arkansas for 1.1 billion USD
Hybar to build second rebar minimill in Arkansas for 1.1 billion USD
Hybar Steel plans a second rebar minimill at Osceola, Arkansas, for 1.1 billion USD, after starting its first unit in 2025. The first plant launched in August 2023 with 1 billion USD of financing, was completed in 22 months on a 1,300-acre greenfield site, and includes a Mississippi River port plus the largest behind-the-meter solar and battery storage facility in the US; Hybar says it is the only North American producer able to run on 100% renewable power. Founder Dave Stickler earlier built Big River Steel, whose 1.3 billion USD mill broke ground in 2014. U.S. Steel bought 49.9% for 700 million USD in 2019; in April it announced a 2 billion USD expansion at Big River Steel Works with 200 new jobs. The projects underline accelerating US minimill rebar and low-carbon capacity growth.
hace 1 minuto
JAMA to unify steel, resin and harness specs across 14 Japanese automakers
hace 1 minuto
JAMA to unify steel, resin and harness specs across 14 Japanese automakers
Leer más
JAMA to unify steel, resin and harness specs across 14 Japanese automakers
JAMA to unify steel, resin and harness specs across 14 Japanese automakers
JAMA said on Nov 19 that 14 Japanese automakers will unify specs for some steel, resin and wiring harnesses to cut costs and speed next-generation vehicle development. Adoption is voluntary, left to each company. Fewer steel grades and unified evaluation criteria mean larger orders per grade for mills. Japan's revised resource law (April 1, 2026) requires automakers above 10,000 vehicles to plan and report recycled plastic; EU ELV rules require 15% recycled plastic in new models within six years and 25% within ten. JAMA has published recycled polypropylene targets with at least 25% post-consumer content. If connectors are included in the harness standard, repair shops could stock one part fitting multiple brands. JAMA aims to standardize vehicle securing on car-hauling trailers by end-2028.
hace 1 minuto
Regístrese para seguir leyendo
Obtenga acceso a las últimas perspectivas en metales y energía nueva
¿Ya tienes una cuenta?Inicia sesión aquí