Impact of Regional Environmental Protection Inspections Weakens, Plate/Sheet, Strip and Foil Production Rebounds but Fails to Reverse Overall Downtrend [SMM Weekly Downstream Survey]

Publicado: Jan 9, 2025 19:09

Guardar

[SMM Weekly Survey on Aluminum Downstream: Impact of Regional Environmental Protection Inspections Weakens, Plate/Sheet, Strip and Foil Production Rebounds but Overall Downtrend Persists] This week, the operating rate of leading domestic aluminum downstream processing enterprises continued to decline, dropping 0.1 percentage points WoW to 60.3%.

This week, the operating rate of leading domestic downstream aluminum processing enterprises continued to decline, dropping by 0.1 percentage points WoW to 60.3%. Operating rates across various sectors showed mixed performance. The operating rates of aluminum plate/sheet and strip and aluminum foil rebounded after several weeks, mainly due to the easing of environmental protection inspections in Henan, allowing affected production lines to resume operations. Additionally, backlog orders from earlier export rushes were concentratedly produced and delivered before the Chinese New Year, driving the weekly operating rate rebound. However, uncertainties surrounding pre-holiday environmental inspections may disrupt production again. The operating rates of the wire and cable and extrusion sectors continued to decline. The wire and cable sector's operating rate fell primarily due to sluggish cargo pick-up by the northern power grid, difficulties in shipments in some regions, and dispersed post-holiday pick-up, leading to low production confidence among enterprises. Meanwhile, the aluminum extrusion sector was significantly impacted by the off-season, with downstream cargo pick-up slowing and enterprises gradually entering holiday mode, reducing demand. The primary factor affecting the secondary alloy sector's production remains raw material shortages, while the primary alloy sector maintained stable operations. Overall, the off-season characteristics of the downstream aluminum market have become increasingly evident, and as enterprises gradually enter the Chinese New Year holiday, operating rates are expected to continue declining. According to SMM forecasts, the operating rate of leading domestic downstream aluminum processing enterprises is expected to drop by another 1.1 percentage points next week to 59.2%.

This week, the operating rate of the primary aluminum alloy sector remained stable at 55%. The primary aluminum alloy market remained steady, with leading enterprises making few adjustments to their operating rates. Although aluminum prices were relatively low during the week, downstream stocking enthusiasm remained sluggish, and alloy enterprises continued to face significant inventory pressure. Future attention should focus on fluctuations in the operating rate of the primary aluminum alloy sector before and after the Chinese New Year.

This week, the operating rate of leading aluminum plate/sheet and strip enterprises rose by 2.6 percentage points to 68.8%. Environmental protection inspections in Henan eased this week, allowing some affected production lines to resume operations. Additionally, backlog orders temporarily delayed due to earlier export rushes were concentratedly produced and delivered before the holiday, leading to a rebound in the operating rate. However, pre-holiday environmental inspections may cause further fluctuations, posing a significant uncertainty for the aluminum plate/sheet and strip market.

This week, the operating rate of leading domestic aluminum wire and cable enterprises recorded 63.6%, down slightly by 1.4 percentage points WoW. Operating rates continued to weaken, mainly due to poor cargo pick-up by the northern power grid, with some regions experiencing shipment stagnation. Additionally, post-holiday pick-up is expected to be dispersed, leading to pessimistic production schedules among some enterprises. However, there is a significant north-south disparity, with enterprises in south China maintaining basically stable operating rates and smooth terminal cargo pick-up. The aluminum wire and cable industry, having undergone a concentrated delivery phase for most of 2024, is now transitioning into the off-season. While 2024 was a year of concentrated terminal cargo pick-up, providing strong support for industry growth, the bidding situation for 2024 remains temporarily unfavorable. The first half of 2025 may enter a "dormant period" for the industry, awaiting subsequent power grid orders to revive the operating rate of the aluminum wire and cable sector. Currently, the industry is significantly affected by the off-season, and SMM expects operating rates to fluctuate downward.

This week, the operating rate of domestic aluminum extrusion enterprises recorded 44.5%, down by 2.0 percentage points WoW. The decline was mainly due to the traditional off-season. Except for automotive extrusion, operating rates in other segments showed significant declines. Specifically, the construction extrusion segment experienced a strong off-season atmosphere, with downstream enterprises gradually entering holiday mode as the Chinese New Year approached, reducing demand. In the industrial extrusion segment, PV extrusion entered the off-season, with reduced orders and slower cargo pick-up by some component manufacturers, leading to finished product inventory backlogs at extrusion plants. Automotive extrusion remained stable. Overall, the positive performance of individual segments could not offset the overall downward trend during the off-season. As the Chinese New Year approaches, enterprises are gradually entering holiday mode, and operating rates are expected to continue fluctuating downward.

This week, the operating rate of leading aluminum foil enterprises rose by 0.7 percentage points to 75.4%. The conclusion of the latest round of environmental protection inspections in Henan allowed some disrupted aluminum foil enterprises to resume normal production. Although it is the off-season for consumption, it coincided with the pre-holiday downstream stockpiling period, leading to a slight rebound in the operating rate this week. However, constrained by weak market demand, this rebound appears to be short-lived, and the short-term outlook for the aluminum foil sector remains one of gradual cooling.

This week, the operating rate of leading secondary aluminum enterprises fell by 0.4 percentage points WoW to 54.4%. Currently, raw material shortages and regional environmental protection inspections remain the primary factors affecting the operating rate of the secondary aluminum sector. Under tight supply conditions, the price difference between primary metal and scrap continued to narrow this week, with many secondary aluminum manufacturers facing material shortages. Additionally, enterprises in regions like Chongqing, which reduced production due to environmental factors, have yet to resume normal operations. In northern regions, some enterprises have entered early holidays due to cold weather, while most others are expected to begin their Chinese New Year holidays after January 22. Overall, in the short term, the operating rate of the secondary aluminum sector is expected to decline further due to raw material and environmental factors.

(SMM Aluminum Team)

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn

Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn

Noticias relacionadas

hace 6 minutos

Los precios del aluminio retroceden ligeramente, el tono débil se mantiene sin cambios [Reseña diaria del aluminio al contado en el sur de China de SMM]

Los precios del aluminio retroceden ligeramente, el tono débil se mantiene sin cambios [Reseña diaria del aluminio al contado en el sur de China de SMM]

hace 6 minutos

hace 31 minutos

Wanfeng Auto informa de una caída de ingresos y beneficios en el primer semestre de 2026 y se centra en aleaciones sostenibles de aluminio y magnesio

Wanfeng Auto informa de una caída de ingresos y beneficios en el primer semestre de 2026 y se centra en aleaciones sostenibles de aluminio y magnesio

El 25 de agosto, Wanfeng Auto Wheel publicó su informe semestral de 2026. En el primer semestre de 2026, la empresa alcanzó unos ingresos operativos totales de 7.481 millones de yuanes, un 0,18 % menos interanual; el beneficio neto atribuible a la empresa matriz fue de 418 millones de yuanes, un 16,46 % menos interanual. Los productos de piezas metálicas ligeras de la empresa se centran en aleaciones de aluminio y magnesio. Entre ellos, la capacidad anual de llantas ligeras de aleación de aluminio supera los 44 millones de juegos, dedicada a la I+D, fabricación, venta y servicio posventa de llantas de aleación de aluminio de alta gama para automóviles y motocicletas, alcanzando una posición de liderazgo mundial en el segmento. Durante el período del informe, la empresa siguió impulsando una producción baja en carbono y respetuosa con el medio ambiente y la aplicación integral de energía verde, avanzando en la sustitución del aluminio basado en energía térmica por aluminio basado en energía hidroeléctrica y en el uso de aluminio secundario.

hace 31 minutos

Anshun aprueba el informe de impacto ambiental del nuevo proyecto de producción de aluminio

Anshun aprueba el informe de impacto ambiental del nuevo proyecto de producción de aluminio

Recientemente, la Oficina Municipal de Ecología y Medio Ambiente de Anshun emitió un anuncio posterior a la aprobación sobre el informe de impacto ambiental del proyecto con una producción anual de 42.000 toneladas de alambrón de aluminio y 40.000 toneladas de rebobinado de alambre de aluminio, peletización y bloques de aluminio fundido. De acuerdo con las disposiciones pertinentes de los procedimientos de aprobación de la evaluación de impacto ambiental para proyectos de construcción, tras su revisión, la Oficina Municipal de Ecología y Medio Ambiente de Anshun ha tomado una decisión de aprobación sobre el informe de impacto ambiental del proyecto con una producción anual de 42.000 toneladas de alambrón de aluminio y 40.000 toneladas de rebobinado de alambre de aluminio, peletización y bloques de aluminio fundido. La decisión de aprobación se anuncia al público, con un período de anuncio del 24 de agosto de 2026 al 30 de agosto de 2026 (7 días). El proyecto está ubicado en el Parque Industrial Tsingshan, municipio de Caiguan, distrito de Xixiu, ciudad de Anshun, provincia de Guizhou. Es un proyecto de nueva construcción que será desarrollado por Anshun Zhongtai Maolisen Alloy Aluminum Manufacturing Co., Ltd. El contenido principal de la construcción del proyecto es el siguiente: el proyecto arrienda la planta existente de Zhongtai Xinbo Aluminum Co., Ltd., con una superficie de 5.560 m². El contenido principal de la construcción incluye la instalación de una línea de producción para 42.000 toneladas de alambrón de aluminio y 40.000 toneladas de rebobinado de alambre de aluminio, peletización y bloques de aluminio fundido, junto con la instalación de las instalaciones y equipos relacionados con la línea de producción.

hace 31 minutos

Noticias relacionadas

Los precios del aluminio retroceden ligeramente, el tono débil se mantiene sin cambios [Reseña diaria del aluminio al contado en el sur de China de SMM]

Sep 04, 2026 12:23

Wanfeng Auto informa de una caída de ingresos y beneficios en el primer semestre de 2026 y se centra en aleaciones sostenibles de aluminio y magnesio

Sep 04, 2026 11:58

Anshun aprueba el informe de impacto ambiental del nuevo proyecto de producción de aluminio

Sep 04, 2026 11:58

Shenzhen Sunxing registra un crecimiento de ingresos del 28,81 % en el primer semestre de 2026, impulsado por las sólidas ventas de aluminio

Sep 04, 2026 11:58