[SMM Hot Topic] 2024 Annual Review of Rebar Market Trends

Publicado: Jan 9, 2025 17:47
Reviewing 2024, affected by weak end-use demand and surplus capacity, the national average rebar price fluctuated downward, with the overall price center shifting lower. Specifically, the national average rebar price in 2024 was 3,575 yuan/mt, down 322 yuan/mt compared to 2023, with a YoY decline of 8.26%.

Reviewing 2024, affected by weak end-use demand and overcapacity, the national average rebar price fluctuated downward, with the overall price center shifting lower. Specifically, the national average rebar price in 2024 was 3,575 yuan/mt, down 322 yuan/mt from 2023, representing a YoY decline of 8.26%. The national rebar price trend in 2024 can be roughly divided into five phases: Phase 1 (January-March), demand recovery fell short of expectations, leading to weaker prices; Phase 2 (April-May), concentrated demand release drove spot price increases; Phase 3 (June-mid-September), entering the off-season for demand, coupled with market panic triggered by the transition between old and new national standards, spot prices dropped significantly to the annual low; Phase 4 (late September-early October), concentrated release of domestic and international macro favourable policies, with low inventory fundamentals driving both volume and price increases for rebar; Phase 5 (October-December), policy implementation fell short of expectations, combined with significantly weaker winter stockpiling enthusiasm compared to previous years, prices pulled back and fluctuated rangebound.

Figure 1  National Average Rebar Price Trend in 2024

Phase 1 (January-March): The "Golden March" peak season demand fell short, coupled with Two Sessions policies not exceeding expectations, leading to weaker spot prices. On the macro front, the Two Sessions did not introduce any policies exceeding expectations, resulting in insufficient market confidence. On the fundamentals side, futures prices declined, downstream procurement was cautious, and the resumption of construction in many inland areas was slower than expected, leading to weaker-than-expected demand release. This caused pressure on both in-plant and social inventories, with spot prices under pressure and weakening.

Phase 2 (April-May): Concentrated demand release during the "Silver April" season drove spot price increases. In April, the eighth round of coke price cuts was implemented, steel mills operated profitably, and blast furnace resumption activity increased, providing stronger support for ore prices. Additionally, new real estate projects increased slightly MoM, with funding and demand conditions significantly improving compared to March. This led to effective destocking of construction materials, driving spot price increases.

Phase 3 (June-mid-September): The off-season for demand, combined with the transition between old and new national standards, triggered market panic, leading to a significant drop in spot prices. Starting in late May, as the northern farming season and south China's rainy season arrived, the construction materials market entered the traditional off-season for demand. Additionally, construction site restrictions during the national college entrance exams further suppressed end-use demand, resulting in continuous inventory buildup for rebar and significant pressure on spot prices. On June 25, the new national standard for rebar was introduced. In east China, warehouses imposed requirements for the outflows from warehouses of old-standard resources within a limited period, prompting price reductions to avoid the risk of destocking difficulties during the off-season. This exacerbated market panic, accelerating the decline in rebar spot prices to the annual low.

Phase 4 (late September-early October): With low inventory fundamentals and concentrated release of domestic and international macro favourable policies, rebar volume and price increased. On the fundamentals side, the continuous decline in spot prices significantly reduced steel mill profits, with rebar production losses generally ranging from 150-200 yuan/mt. Many steel mills proactively conducted maintenance and production cuts. Thanks to the rapid decline in production and the arrival of the "September-October peak season," rebar destocking accelerated, and fundamentals improved significantly. On the macro front, the US Fed implemented its first interest rate cut, and domestic macro favourable policies were introduced, including lowering central bank policy rates, reducing mortgage rates on existing home loans, and emphasizing "stabilizing the real estate market, strictly controlling new supply, optimizing existing supply, improving quality, and increasing loans for white-listed projects." This series of favourable information shifted market sentiment from pessimistic to highly optimistic. Combined with the support of low inventory fundamentals, rebar prices achieved a strong rebound, recovering nearly half a year's losses within just one week.

Phase 5 (mid-October-December): Policy implementation fell short of expectations, combined with significantly weaker winter stockpiling enthusiasm compared to previous years, leading to price pullbacks and rangebound fluctuations. After the National Day holiday, multiple meetings fell short of expectations, cooling capital market sentiment. Producers were eager to sell and realize profits, causing rebar prices to pull back. After November, the US presidential election and domestic debt resolution policies were successively implemented, shifting market expectations to neutral. The macro perspective temporarily entered a vacuum period, with valuations returning to fundamentals. On the supply side, environmental protection inspections and routine winter maintenance kept steel mill construction material production relatively low, resulting in relatively small overall supply pressure. On the demand side, the construction materials market entered the off-season in Q4. Northern projects nearly halted due to cold wave weather, and winter stockpiling enthusiasm was weaker than in previous years. Overall, the rebar market experienced weak supply and demand, with inventory remaining low. Fundamental imbalances were not prominent, and spot prices fluctuated rangebound.

Looking ahead to 2025, on the demand side, rebar's primary downstream demand comes from construction steel, closely tied to real estate and infrastructure. In 2024, China's real estate policies were further relaxed, but the actual effects were not significant. Real estate market data, from sales to new starts, continued to deteriorate, making it difficult to claim a bottom has been reached, with further downside room. However, considering the low base of new real estate starts this year, the decline in new starts is expected to narrow in 2025. The infrastructure sector, under the pressure of debt resolution and changes in investment structure, is likely to see limited growth, making it difficult to offset the weakness in real estate steel demand. Therefore, in 2025, rebar demand is highly likely to remain weak. Against the backdrop of continued declines in end-use demand, steel mill profits may shrink further, leading to passive production cuts for rebar. Overall, rebar is expected to continue the weak supply and demand pattern in 2025. With ample raw material supply, cost support for rebar is likely to remain unstable, and the price center may shift further downward.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
[SMM Stainless Steel Flash] La Comisión Europea lanza una consulta sobre la ampliación del ámbito de aplicación del Reglamento del acero de la UE
hace 1 hora
[SMM Stainless Steel Flash] La Comisión Europea lanza una consulta sobre la ampliación del ámbito de aplicación del Reglamento del acero de la UE
Leer más
[SMM Stainless Steel Flash] La Comisión Europea lanza una consulta sobre la ampliación del ámbito de aplicación del Reglamento del acero de la UE
[SMM Stainless Steel Flash] La Comisión Europea lanza una consulta sobre la ampliación del ámbito de aplicación del Reglamento del acero de la UE
La Comisión Europea lanzó una consulta pública específica el 28 de julio para recabar opiniones sobre el ámbito de aplicación del Reglamento del Acero de la UE, lo que supone la primera revisión para decidir si se añaden productos siderúrgicos adicionales a las medidas comerciales del reglamento, menos de un mes después de su entrada en vigor el 1 de julio de 2026. La consulta estará abierta ocho semanas, hasta el 28 de septiembre de 2026. Se examinan cuatro categorías de productos: tubos y perfiles huecos de fundición; alambrón de acero no aleado y de otras aleaciones; alambrón de acero inoxidable; y barras forjadas de acero no aleado y de otras aleaciones. Se invita a participar a productores, usuarios, comerciantes, importadores y asociaciones del sector del acero. La Comisión debe completar su evaluación antes del 31 de diciembre de 2026, tras lo cual podrá decidir si modifica la cobertura de productos del reglamento.
hace 1 hora
[Tata Steel UK: el suministro eléctrico del EAF se retrasa hasta 2029]
hace 1 hora
[Tata Steel UK: el suministro eléctrico del EAF se retrasa hasta 2029]
Leer más
[Tata Steel UK: el suministro eléctrico del EAF se retrasa hasta 2029]
[Tata Steel UK: el suministro eléctrico del EAF se retrasa hasta 2029]
El director ejecutivo T V Narendran dijo que el proyecto de horno de arco eléctrico de bajas emisiones de carbono de 1.250 millones de libras y 3,2 millones de toneladas, el mayor del Reino Unido, que sustituye al horno alto cerrado y está respaldado por 500 millones de libras en apoyo gubernamental, sigue según lo previsto para finalizarse en 2028, pero no se espera el suministro eléctrico completo de National Grid hasta 2029; Tata Steel está negociando con el operador de la red un acceso anticipado parcial para realizar pruebas antes de la plena operación, ya que la planta aspira a reducir las emisiones de CO₂ del emplazamiento en un 90 %, es decir, unos 5 millones de toneladas anuales.
hace 1 hora
[Informe matutino del mercado del acero de SMM] M2 sube un 8,6 % interanual, M1 sube un 5,5 % interanual
hace 2 horas
[Informe matutino del mercado del acero de SMM] M2 sube un 8,6 % interanual, M1 sube un 5,5 % interanual
Leer más
[Informe matutino del mercado del acero de SMM] M2 sube un 8,6 % interanual, M1 sube un 5,5 % interanual
[Informe matutino del mercado del acero de SMM] M2 sube un 8,6 % interanual, M1 sube un 5,5 % interanual
Recientemente, la NDRC trabaja con los departamentos pertinentes para acelerar el estudio y la formulación del Plan de Implementación de la Estrategia de Ampliación de la Demanda Interna (2026-2030). En adelante, la NDRC colaborará con dichos departamentos para expandir eficazmente la demanda interna de China con mayor intensidad y medidas más concretas.
hace 2 horas
[SMM Hot Topic] 2024 Annual Review of Rebar Market Trends - Shanghai Metals Market (SMM)