[SMM Analysis] Policy Adjustments by Indonesia's New Government: Challenges and Opportunities for the Nickel Industry

Publicado: Oct 24, 2024 16:47 (GMT+8)
Fuente: SMM
With the inauguration of Indonesia's new government, Prabowo's policies are expected to have a profound impact on the country's nickel industry. In the following sections, we will analyze in detail how these policy changes will affect the development and investment environment of the nickel industry.

Economic Growth and Resource Taxation
Firstly, Prabowo's government has set a target to increase the economic growth rate from 5% to 8%, which is a favourable macro front for Indonesia's nickel industry. If this growth target is achieved, it will drive overall economic development, potentially increasing the demand for nickel resources. However, it is worth noting that the government's high expectations and adjustments for economic growth may have varying impacts on the nickel industry. On one hand, the positive goal of high economic growth may drive the expansion of Indonesia's nickel industry capacity, especially with the introduction and expansion of hydrometallurgy projects for downstream applications in the new energy sector, creating a more diversified development landscape for Indonesia's nickel industry chain. On the other hand, the government's plan to increase the proportion of fiscal revenue to GDP from 12% to 23% means that there may be increased taxation on nickel mines and other related nickel products. Once specific tax indicators are implemented in the nickel industry, the risk of increased operational costs for enterprises will also rise.

Fuel Import and Blending Ratio Adjustment
The new policy proposes to increase the blending ratio of palm oil with diesel from 35% to 50% to reduce fuel imports. If successfully implemented, this policy may reduce Indonesia's dependence on imported diesel and could lead to a long-term decline in ocean freight rates. For the nickel industry, this may affect logistics costs and also indicate Indonesia's strategy towards energy diversification, which could indirectly improve the current perception of Indonesia's overall market as not being "green" enough.

Tax Adjustments and Investment Environment
In terms of tax policy, potential adjustments include considering lowering the corporate income tax from 22% to 20%. This would improve the investment environment, potentially attracting more foreign investment into the nickel industry and promoting the expansion and technological upgrading of existing enterprises. Although this news, along with the potential plan to increase VAT from 11% to 12%, is not yet confirmed, if implemented, it could have a certain potential impact on the production costs of enterprises involved in all aspects of Indonesia's nickel industry.

Management Burden of Government Structure Adjustment
In the new government structure, the number of ministers has increased from 34 to 53, with an additional 56 deputy ministers, expanding the total number to 109. While this may lead to more efficient decision-making and policy implementation, it also increases the government's fiscal burden, making the increase in the proportion of government revenue to GDP more challenging. This fiscal pressure may be reflected in tax policies across various industries, including those related to the nickel industry.

Professional Team and Policy Continuity
Finally, taking the management positions in Indonesia's Ministry of Energy and Mineral Resources and the Ministry of Investment and downstream departments as examples, a relatively high proportion of ministerial-level officials are from the previous Jokowi administration. On one hand, having experienced personnel in relevant fields may bring policy continuity and professionalism, benefiting the sustained development of the nickel industry. On the other hand, this also provides the possibility for the stability and continuity of subsequent policies. However, the actual effect of the professional team's role in governance needs time to be verified.

Considering these factors, the policy adjustments by Indonesia's new government have complex and multifaceted impacts on the nickel industry. Although the improvement in the investment environment may bring benefits, changes in tax and other policies need to be closely monitored to assess their actual impact on the long-term development of the industry.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
【Flash | Los recargos de tubos con molibdeno de Tubacex en octubre son mixtos】
hace 16 horas
【Flash | Los recargos de tubos con molibdeno de Tubacex en octubre son mixtos】
Leer más
【Flash | Los recargos de tubos con molibdeno de Tubacex en octubre son mixtos】
【Flash | Los recargos de tubos con molibdeno de Tubacex en octubre son mixtos】
Tubacex publicó sus recargos de aleación de octubre para tubos. En euros, el 316/316L acabado en caliente/frío bajó de 5,07 €/5,59 € por kg (5.070 €/5.590 € por tonelada) a 5,05 €/5,56 € por kg (5.050 €/5.560 € por tonelada). Los materiales con alto contenido de Mo, con Mo superior al 2,5 %, descendieron de 5,26 €/5,79 € a 5,23 €/5,76 € por kg. Los recargos para el 2205 y el 2507 se mantuvieron sin cambios, mientras que el 254 SMO subió de 9,64 €/10,62 € a 9,67 €/10,65 € por kg. Análisis de SMM: la mayoría de los grados de tubo con Mo se mantuvieron estables o ligeramente a la baja, mientras que el 254 SMO avanzó, lo que indica una transmisión de costes diferenciada entre grados.
hace 16 horas
[SMM Noticias de Acero Inoxidable] Los precios de la chatarra de acero inoxidable en India divergen: el 304 se relaja con el níquel y el 316, escaso, se mantiene firme
hace 16 horas
[SMM Noticias de Acero Inoxidable] Los precios de la chatarra de acero inoxidable en India divergen: el 304 se relaja con el níquel y el 316, escaso, se mantiene firme
Leer más
[SMM Noticias de Acero Inoxidable] Los precios de la chatarra de acero inoxidable en India divergen: el 304 se relaja con el níquel y el 316, escaso, se mantiene firme
[SMM Noticias de Acero Inoxidable] Los precios de la chatarra de acero inoxidable en India divergen: el 304 se relaja con el níquel y el 316, escaso, se mantiene firme
El mercado de chatarra de acero inoxidable de la India se movió en distintas direcciones en la semana que terminó el 1 de octubre. Los precios internos de la chatarra 304 bajaron ligeramente y las ofertas de importación los siguieron, mientras que los precios del 316 se mantuvieron estables tanto en el mercado interno como en el de importación. La debilidad de los precios del níquel en la LME presionó el ánimo para el 304, y los compradores se limitaron a sus necesidades inmediatas mientras la actividad se desaceleraba durante el período festivo. La escasa disponibilidad limitó la caída del 316. En cuanto a las compras, los plazos de procesamiento reducidos tras la flexibilización por parte del gobierno de los requisitos del Certificado de Inspección Previa al Embarque (PSIC), junto con los costos adicionales de importación, siguieron limitando la flexibilidad de las plantas. Algunas plantas están evaluando palanquillas, planchones y arrabio de níquel (NPI) como alternativas a la chatarra para gestionar los costos de los insumos. Mirando más adelante, la propuesta de la UE de restringir las exportaciones de residuos metálicos a la India en virtud de su nuevo Reglamento sobre Traslados de Residuos (WSR), de adoptarse, reduciría aún más las opciones de importación de chatarra de la India. En el corto plazo, la chatarra 304 enfrenta una leve presión a la baja si el níquel se mantiene débil, mientras que se espera que el 316 se mantenga firme mientras la oferta siga siendo escasa. La evolución del PSIC y la economía relativa de las palanquillas y el NPI serán factores clave a observar.
hace 16 horas
【Flash | Metallus aumenta el recargo de molibdeno de octubre para el acero 300M】
hace 16 horas
【Flash | Metallus aumenta el recargo de molibdeno de octubre para el acero 300M】
Leer más
【Flash | Metallus aumenta el recargo de molibdeno de octubre para el acero 300M】
【Flash | Metallus aumenta el recargo de molibdeno de octubre para el acero 300M】
Metallus fijó sus recargos de materia prima de octubre para el período del 1 al 30 de octubre. El componente de Mo para el acero 300M subió un 0,52 % hasta 15,176 $/cwt, unos 334,57 $/t de acero, desde 15,098 $/cwt, o 332,85 $/t. El recargo total publicado aumentó un 1,03 % hasta 45,054 $/cwt. La chatarra subió a 17,750 $/cwt, mientras que el recargo energético independiente para barras y tubos bajó de 1,296 $/cwt, unos 28,57 $/t, a 0,050 $/cwt, o 1,10 $/t.
hace 16 horas