Key Takeaways from the 17 th SMM International Aluminium Industry Summit Regarding Aluminium Scrap Recycling and Secondary Aluminium Industry

Publicado: Jul 22, 2022 11:10 (GMT+8)
Fuente: SMM
SHANGHAI, Jul 22 (SMM) - The development of China's secondary aluminium industry is accelerating

SHANGHAI, Jul 22 (SMM) - 
The development of China's secondary aluminium industry is accelerating 
1. China's secondary aluminium industry has developed rapidly, making China the world's largest secondary aluminium producer. In 2021, China's secondary aluminium output was 8 million mt, an increase of 10% over 2020. China accounted for 46% of the global secondary aluminium output in 2021, up 2 percentage points from 2020. 
2. The green and low-carbon characteristics of secondary aluminium are prominent, and are in line with the development direction of the circular economy. Secondary aluminium can utilise urban mine resources; its energy consumption is just 3-5% of that of primary aluminium; it can save water consumption by 8 mt when compared with primary aluminium.  
3. The structure of secondary aluminium raw materials has been adjusted, and domestic old aluminium scrap has become the main raw material.  Affected by tightening aluminium scrap import policy, China's aluminium scrap import volume has shown a downward trend since 2010. In 2020, 820,000 mt of aluminium scrap was imported, down 71% from 2010. The proportion of imported aluminium scrap in the raw material structure of secondary aluminium dropped from 50% in 2010 to 16% in 2020. At the same time, the domestic aluminium scrap recycling volume has grown rapidly, and its proportion in the secondary aluminium raw material structure has increased to 55%, which is estimated to rise to 70% in 2025. 
4. The supply of secondary aluminium increased significantly due to massive aluminium scrap recycling volume   As aluminium scrap recycling gains momentum, it is expected that China's recycling of old aluminium scrap will exceed 8 million mt by 2025, and the output of secondary aluminium will reach 11.5 million mt. 

China’s secondary aluminium industry still lags behind other countries  
 1. China's secondary aluminium industry started relatively late, and the recycling system of aluminium scrap is not yet perfect. In 2021, the proportion of secondary aluminium in China's aluminium supply was only 16%, far less than 40% in the United States. 
2. The recycling system is not yet perfect. The automobile industry is a key area of aluminium consumption in China, but the legal channels for automobile dismantling are limited.  Since 2000, the rapid development of China's automobile industry has created enormous resources for aluminium scrap recycling. From 2011 to 2021, the average annual growth rate of China's car ownership was 11%, and China's car ownership reached 302 million units in 2021. However, the development of China's automobile dismantling industry is relatively backward. Generally, the ratio of the number of retired vehicles to the number of vehicles in existence is 3-5% in developed countries, but is just 0.74% in China.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
[SMM Noticias breves] South32 revisó la oferta de prima CIF MJP del cuarto trimestre de 2026 a 265 USD/tm
02 Oct 2026 10:52 (GMT+8)
[SMM Noticias breves] South32 revisó la oferta de prima CIF MJP del cuarto trimestre de 2026 a 265 USD/tm
Leer más
[SMM Noticias breves] South32 revisó la oferta de prima CIF MJP del cuarto trimestre de 2026 a 265 USD/tm
[SMM Noticias breves] South32 revisó la oferta de prima CIF MJP del cuarto trimestre de 2026 a 265 USD/tm
Fuentes del mercado informan: South32 revisó la oferta de prima CIF MJP para el cuarto trimestre de 2026 a 265 USD/tm, por debajo de los 325 USD/tm. Vigencia: 5 de octubre de 2026.
02 Oct 2026 10:52 (GMT+8)
India ADC 12 se mantiene firme mientras el aluminio en la LME cae; la escasa oferta de chatarra limita la caída
01 Oct 2026 17:48 (GMT+8)
India ADC 12 se mantiene firme mientras el aluminio en la LME cae; la escasa oferta de chatarra limita la caída
Leer más
India ADC 12 se mantiene firme mientras el aluminio en la LME cae; la escasa oferta de chatarra limita la caída
India ADC 12 se mantiene firme mientras el aluminio en la LME cae; la escasa oferta de chatarra limita la caída
Los precios del ADC 12 en India se mantuvieron relativamente estables a pesar de una caída del 1,2 % en los precios del aluminio a 3 meses en la LME entre el 24 y el 30 de septiembre.
01 Oct 2026 17:48 (GMT+8)
Rio Tinto asegura las operaciones de la fundición de Bell Bay hasta finales de 2031
01 Oct 2026 17:09 (GMT+8)
Rio Tinto asegura las operaciones de la fundición de Bell Bay hasta finales de 2031
Leer más
Rio Tinto asegura las operaciones de la fundición de Bell Bay hasta finales de 2031
Rio Tinto asegura las operaciones de la fundición de Bell Bay hasta finales de 2031
Rio Tinto anunció el 1 de octubre que había alcanzado acuerdos con el Gobierno de Tasmania, el Gobierno de la Mancomunidad de Australia e Hydro Tasmania para extender el suministro eléctrico a la fundición de aluminio de Bell Bay hasta finales de 2031. Los dos gobiernos también aportarán un paquete de apoyo combinado de 200 millones de dólares australianos a lo largo de cinco años, contribuyendo 100 millones cada uno. No se divulgaron los términos comerciales del acuerdo energético. Bell Bay produce alrededor de 190.000 toneladas de aluminio primario al año, mientras que su contrato eléctrico vigente debía expirar a finales de 2026. El acuerdo elimina la incertidumbre operativa inmediata de la fundición. Bell Bay es la tercera gran fundición de aluminio australiana en recibir apoyo respaldado por el Gobierno en 2026, tras Boyne y Tomago, lo que pone de relieve la presión continua de los elevados costes eléctricos y la competencia internacional.
01 Oct 2026 17:09 (GMT+8)