SMM: Scramble for Raw Materials for Secondary Copper to Become Fiercer

Publicado: Dec 10, 2021 14:42 (GMT+8)
Fuente: SMM
At the 2021 SMM South China Nonferrous Metal Industry Annual Conference, Wuxin Yong, senior copper analyst with SMM analysed the changes and expectations after the implementation of the policy of imported raw material for secondary copper.

SHANGHAI, Dec 10 (SMM) -  At the 2021 SMM South China Nonferrous Metal Industry Annual Conference, Wuxin Yong, senior copper analyst with SMM analysed the changes and expectations after the implementation of the policy of imported raw material for secondary copper. He said that from the perspective of raw materials, the supply of copper scrap is tight, and the price difference between copper cathode and bare bright copper has narrowed. From the perspective of finished products, the price spread between copper rod produced with copper scrap (low oxygen rods) and copper cathode rod (oxygen free rods) has narrowed amid the tight supply of copper scrap.

SMM believes that the capacity of the copper rod industry using copper scrap as feedstock has gradually been saturated, and close to surplus, but the supply of raw materials is insufficient. This will make the scramble for raw materials be fiercer. With the potential decline in the copper prices next year, the price spread between copper cathode and copper scrap may be narrow. Therefore, the copper rod plants using copper scrap are likely to remain in continued losses next year and will face the risk of being reshuffled.

Realise zero import of solid waste from 2021

China’s copper scrap market is mainly concentrated in the Yangtze River Delta, Pearl River Delta and Bohai area.

Generally speaking, the most developed regions are also the regions with the largest output of copper products. China has three key areas for dismantling, processing and consumption of copper scrap in the Yangtze River Delta, the Bohai area and the Pearl River Delta. The volume of recycled copper scrap in these areas accounts for about 80% of the total domestic copper scrap output.

The Yangtze River Delta, represented by Taizhou and Ningbo in Zhejiang, the Pearl River Delta, represented by Guangdong, as well as the surrounding areas of the Bohai Sea, represented by Tianjin, Hebei, and Shandong, have grouped together special copper scrap markets with large volume of dismantling and trading, which mainly gather in the form of industrial parks.

Due to the tightening of the copper scrap import policy, the copper scrap market in coastal areas that relies on the dismantling of imported Category Seven copper scrap has shrunk significantly. This is especially true for the copper scrap dismantling park in Zhejiang.

The Ministry of Ecology and Environment made it clear that 2020 is the final year for the implementation of zero solid waste imports. After the implementation of the regulations on the standards for secondary copper raw materials and secondary brass raw materials in November, high-quality copper scraps that meet the standards will be imported in the name of the raw materials for secondary copper/brass. From 2021, the Ministry of Ecology and Environment will no longer accept the approval documents for copper scrap and strictly prohibit the import of solid waste.

The raw materials for secondary copper (brass) can essentially be deemed as Category Six copper scrap with higher copper content which is cleaner and has higher requirements for copper content, inclusions and water yield. The import of secondary copper (brass) has almost no special requirements for the import qualifications of enterprises, and approval documents are no longer needed. Enterprises can freely import the raw materials that meet the standard.

According to SMM calculations, 88% of the Category Six copper scrap can meet the new standards for raw materials for secondary (brass) copper. 96.53% of copper scrap meets the standard and 77.16% of brass meets the standard. Therefore, the requirements of the new standard on the content of metal do not significantly restrict the import of copper scrap.

The import volume of copper scrap has declined since 2018 after the implementation of the solid waste import management plan. Domestic enterprises that dismantled Category Seven copper scrap have moved to Southeast Asia. The import volume of secondary copper raw materials rebounded sharply at the end of 2020 after the introduction of the secondary copper raw material standards. In the face of the stricter import requirements of copper scrap, enterprises remelt copper scrap into ingots overseas before importing. From 2018 to 2020, the import volume of copper ingots continued to grow.

According to the National Nonferrous Metals Standardisation Technical Committee, the existing and high raw material standards and secondary brass raw materials will be revised. The secondary brass raw materials will be changed to secondary copper alloy raw materials. Two subdivided categories of bronze and cupronickel raw materials will be incorporated. The expansion of the standard for secondary copper raw materials better meets the domestic demand for a variety of copper raw materials.

According to SMM data, China's copper scrap supply in 2021 was approximately 3.9 million mt in metal content, including approximately 2.23 million mt of domestic cargoes in metal content, 1.32 million mt of imported copper scrap and brass raw materials in metal content, as well as 350,000 mt of imported copper ingots in metal content. Imported copper scrap and imported copper ingots accounted for about 41.54% of the total supply in 2021, and normally accounted for 35-45% between 2017-2020.

Impact from changes in copper scrap policies in Malaysia and EU on China

Malaysia is the current largest supplier of China’s copper scrap imports, with the import volume of 167.1 kt in 2020, accounting for 17.46% of the total imports.

Malaysia plans to tighten the standards for allowable imports of metal scrap in November, requiring that metal content in imported copper scrap be at least 94.75%, the content of solid ferrous metal not exceed 5.0%, non-metallic scrap content not exceed 0.25%, and the content of circuit board or electronic waste not exceed 0%.

The new standards is almost as strict as China's current secondary copper raw material standards. This will make local recycling and processing companies in Malaysia unable to import the Category Seven copper scrap and some low-grade Category Six copper scrap, and is likely to affect local copper scrap recycling and processing plants like granule and copper ingot plants. However, customs declaration is likely to be looser than expected.

According to media news, the EU will amend the Waste Shipment Regulation in November to restrict the export of solid waste. The areas willing to receive solid waste and have stricter disposal capabilities without adding additional pollution can be an exception. The main purpose is to curb the export of waste to third-party countries that do not meet EU environmental standards.

China has banned the import of solid waste since 2021, and clean copper recycling materials can be imported in the code of secondary copper. Therefore, the EU and China policies are inconsistent. European copper exports have been affected as some overseas suppliers have stopped shipping. And domestic companies stand on the sidelines.

To find a solution, the supplier needs to apply for a local EU certification, and can export high-quality copper scrap as clean recyclable raw materials instead of solid waste. The application process takes about 2 months. The cargoes can also be exported to China transit a third-party. So the impact on China is insignificant.

According to SMM data, as of December 3, the coefficient of US brass against LME copper stood at 66-68%; the coefficient of cif #2 copper granule quotes against LME copper stood at 96.5-97.5%, and the coefficient of bare bright copper against LME copper stood at 99-99.5% on a cif basis.

How will the supply and demand of copper scrap develop?

SMM expects the total supply of copper scrap in 2022 to be about 4.09 million mt of metal content, including 2.31 million mt of metal content of domestic supply as well as 1.78 million mt of imported copper scrap and copper ingot in metal content.

Jiangxi's pressure on tax policy and the environmental protection is relatively small, attracting a large number of plants of copper rods using copper scrap and brass rods to transfer to or put into production in Jiangxi. China’s capacity of copper rods produced with copper scrap in 2021 is expected to exceed 6 million mt, which will expand further in 2020. The capacity of copper rod is expected to reach 3 million mt. For a long time, the domestic copper scrap supply gap has been large, and the capacity of copper scrap rods can only be operated by a half. There are often shortages every year. In 2021, the supply was tight for most of the year. And the supply will remain tight in 2022.

The supply of copper scrap is tight, and the price difference between copper cathode and bare bright copper has narrowed. From the perspective of finished products, the price spread between copper rod produced with copper scrap (low oxygen rods) and copper cathode rod (oxygen free rods) has narrowed amid the tight supply of copper scrap.

SMM believes that the capacity of the copper rod industry using copper scrap as feedstock has gradually been saturated, and close to surplus, but the supply of raw materials is insufficient. This will make the scramble for raw materials be fiercer. With the potential decline in the copper prices next year, the price spread between copper cathode and copper scrap may be narrow. Therefore, the copper rod plants using copper scrap are likely to remain in continued losses next year and will face the risk of being reshuffled.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
¿Cómo funciona el punto de referencia TC/RC del concentrado de cobre? [Análisis de SMM]
hace 12 horas
¿Cómo funciona el punto de referencia TC/RC del concentrado de cobre? [Análisis de SMM]
Leer más
¿Cómo funciona el punto de referencia TC/RC del concentrado de cobre? [Análisis de SMM]
¿Cómo funciona el punto de referencia TC/RC del concentrado de cobre? [Análisis de SMM]
hace 12 horas
[El cobre del LME toca mínimo de cuatro meses por la liquidación de la IA y la debilidad de China]
hace 12 horas
[El cobre del LME toca mínimo de cuatro meses por la liquidación de la IA y la debilidad de China]
Leer más
[El cobre del LME toca mínimo de cuatro meses por la liquidación de la IA y la debilidad de China]
[El cobre del LME toca mínimo de cuatro meses por la liquidación de la IA y la debilidad de China]
El 16 de noviembre, el cobre a tres meses en la LME cayó hasta un 1,4% en las primeras operaciones, situándose en 13.210 USD/tonelada, su nivel más bajo desde el 8 de julio y un mínimo de más de cuatro meses. Una liquidación impulsada por la inteligencia artificial sembró dudas sobre la inversión en centros de datos, mientras que los cambios en la dirección de Nvidia y la incertidumbre política tras las elecciones de mitad de mandato añadieron cautela; los comentarios restrictivos de la Reserva Federal también reforzaron las expectativas de subidas de tipos. El cobre ha perdido alrededor de un 10% desde su máximo histórico de septiembre. En China, el crecimiento de la producción industrial de octubre se desaceleró y el gasto de los consumidores siguió débil, aunque las compras físicas fueron sólidas: la prima del cobre de Yangshan se mantuvo cerca del récord de 290 USD/tonelada, los inventarios de cobre en la SHFE cayeron un 18% la semana pasada hasta su nivel más bajo en casi tres años, y el diferencial del contrato más próximo en la SHFE se amplió bruscamente, presionando a los tenedores de posiciones cortas.
hace 12 horas
Datos: Movimiento del mercado SHFE y DCE (17 de noviembre)
hace 12 horas
Datos: Movimiento del mercado SHFE y DCE (17 de noviembre)
Leer más
Datos: Movimiento del mercado SHFE y DCE (17 de noviembre)
Datos: Movimiento del mercado SHFE y DCE (17 de noviembre)
La siguiente tabla muestra el movimiento de metales ferrosos y no ferrosos en la SHFE y la DCE el 17 de noviembre de 2026
hace 12 horas
Regístrese para seguir leyendo
Obtenga acceso a las últimas perspectivas en metales y energía nueva
¿Ya tienes una cuenta?Inicia sesión aquí