[SMM Analysis] Shanghai Nickel diving fell nearly 2% in the afternoon. Will the supply-side tight support logic be loosened?

Publicado: Sep 16, 2020 16:38 (GMT+8)

SMM9 March 16: Shanghai Nickel opened down today, continuous diving fell nearly 2% in the afternoon, and then recovered. By the end of the day, the main contract of Shanghai Nickel 2011 was at 117540 yuan / ton, down 1.17%. In the spot market, most traders have shifted from the Shanghai Nickel 10 contract to the main monthly 11 contract quotation. The morning market inquiry is OK, but only the traders offering low prices have certain transactions. At present, spot fundamentals fluctuate less, downstream bargain-hunting on demand, and consumption is more stable than in the earlier period.

SMM believes that the fundamental focus of nickel prices is still biased towards the nickel ore-nickel iron-stainless steel industry line. The price of nickel ore has risen all the way under the condition of considerable shortage of supply. The high price of Ferro nickel has been supported by both raw material support and tight supply. The mentality of high production in stainless steel plants has not been significantly reduced for the time being. This production line still has a strong support for nickel price. However, the fluctuation of macro factors has obviously disturbed the price of nickel in the short term. Today, the price of nickel seems to have fallen sharply due to the influence of capital sentiment in the afternoon. However, the US dollar index fell rapidly after the close of trading in Shanghai, and Lunni immediately went back to intraday highs, followed the Fed's interest rate resolution in the evening, and is expected to maintain loose liquidity. Short-term Shanghai Nickel may continue to fluctuate at 117000-120000 yuan / ton and Lunni 15100-15400 US dollars / ton.

Institutional point of view:

Huatai Futures: the price of nickel has recently been dragged down and adjusted by the external environment, but the overall upward trend has not yet ended. At present, the supply and demand of nickel is still strong, the prices of nickel ore, high nickel iron and scrap stainless steel continue to rise, the supply of nickel ore in the middle line is tight, the positive feedback of stainless steel demand on nickel price may continue to strengthen, and the domestic demand for new energy vehicles is also gradually recovering. sales of new energy vehicles in Europe are growing rapidly, and nickel supply is in short supply in the third quarter. If the new production capacity of Xiangyu stainless steel in Indonesia is put into production as scheduled in the fourth quarter, or the domestic production of 300 series stainless steel remains at the current high level, the excess supply of nickel and iron in the fourth quarter will also be limited. In the middle line, as the new production capacity of Ferro nickel in Indonesia is put into production one after another, the supply of ferronickel in Indonesia will still become a significant surplus in the future. Nickel in Indonesia can still be further replaced by refined nickel in 304 stainless steel nickel raw materials, and the price of nickel in the middle line may still fall again.

Jinyuan Futures: previously, we believe that the rising trend of nickel prices has basically ended, and the follow-up trend will be dominated by high shocks, which is still maintained at present. The main support of this round of nickel price rise is driven by the downstream demand for stainless steel, but as the price of stainless steel falls, the market demand drops, stainless steel profits turn to a loss, and the demand for nickel begins to decline. In the later stage, with the gradual increase of Ferro nickel production capacity in Indonesia, the impact on domestic supply will be greater and greater, the overall supply will begin to exceed demand, and the upward pressure on nickel prices will become greater and greater. Although the market is gradually entering the pattern of supply exceeding demand, the trend of nickel price is still repeated before a large amount of inventory is accumulated and before the market demand weakens. In the future, the price of nickel is likely to fall after the high shock, but at present it is still mainly wait-and-see, waiting for the accumulation of inventory, until it forms a greater pressure on the price.

Jinrui futures: stainless steel prices peaked, profits are limited, restricting nickel prices to continue to rise. The supply of nickel ore is still tight, and nickel and iron prices are beginning to come under pressure: in the face of a substantial increase in nickel ore supply throughout the year, Philippine mine owners have maintained prices. October futures of some mines have been sold one after another this week, and the market will concentrate their bids next week. The FOB price of Ni mine (1.5%) is expected to increase by about 5-6 US dollars / wet ton. In terms of Ferro-nickel, the domestic high-nickel iron showed a price correction for the first time after it continued to rise in June. Domestic ferronickel production increased faster than expected in August, and the national nickel pig iron output is expected to decline slightly in September. In the case of stainless steel maintaining a high output in September, the overall supply of nickel raw materials is tight, and the price correction of nickel and iron is expected to be limited. At present, stainless steel profits are beginning to be compressed, in the later stage, we pay attention to the impact of profit compression on the actual output, as well as the negative feedback to the industry chain. Overall, the high production of stainless steel continues, and the shortage of raw materials has not been alleviated, the price of nickel may be mainly fluctuated.

"Click to understand and sign up: 2020 China Automotive New Materials Application Summit Forum

Scan the QR code above to view the business cards of the participating companies and sign up online

Scan the code and apply to join the SMM Automotive Industry Exchange Group.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
[SMM Noticias de última hora sobre níquel] Los disturbios en PT Askon en Morowali generan preocupación
hace 4 horas
[SMM Noticias de última hora sobre níquel] Los disturbios en PT Askon en Morowali generan preocupación
Leer más
[SMM Noticias de última hora sobre níquel] Los disturbios en PT Askon en Morowali generan preocupación
[SMM Noticias de última hora sobre níquel] Los disturbios en PT Askon en Morowali generan preocupación
El 2 de octubre, las protestas por el polvo relacionado con la minería y los impactos ambientales escalaron hasta convertirse en disturbios en PT Astima Konstruksi (PT Askon) en la aldea de Matarape, en la regencia de Morowali, Célebes Central, Indonesia. Los medios locales informaron de que los manifestantes quemaron varios vehículos y excavadoras, mientras que el acceso a la carretera de acarreo y al embarcadero de la empresa quedó bloqueado, lo que interrumpió el transporte de materiales. Posteriormente, la policía evacuó a ciudadanos chinos del lugar. El incidente ha suscitado preocupación por posibles interrupciones en la minería de níquel cercana y en las actividades logísticas. Sin embargo, hasta el 5 de octubre no había informes confirmados que establecieran el alcance de las suspensiones o reducciones de producción en minas de níquel específicas. Debe prestarse más atención a la restauración del acceso al transporte, a las condiciones de seguridad locales y a cualquier impacto posterior en el suministro de mineral de níquel.
hace 4 horas
[SMM Noticias de Acero Inoxidable] Froch de Taiwán (PoC) apunta a iniciar operaciones a principios de 2027 en su planta de tubos en Marruecos, dirigida a Europa
hace 4 horas
[SMM Noticias de Acero Inoxidable] Froch de Taiwán (PoC) apunta a iniciar operaciones a principios de 2027 en su planta de tubos en Marruecos, dirigida a Europa
Leer más
[SMM Noticias de Acero Inoxidable] Froch de Taiwán (PoC) apunta a iniciar operaciones a principios de 2027 en su planta de tubos en Marruecos, dirigida a Europa
[SMM Noticias de Acero Inoxidable] Froch de Taiwán (PoC) apunta a iniciar operaciones a principios de 2027 en su planta de tubos en Marruecos, dirigida a Europa
Froch Enterprise, fabricante taiwanés de tubos de acero inoxidable, registró una notable mejora en su rentabilidad del primer semestre. La empresa señaló que el alza de los precios del níquel elevó los precios de sus productos, impulsando tanto el beneficio antes como después de impuestos en agosto. La construcción de instalaciones de IA y semiconductores está impulsando la demanda de tuberías para salas blancas, agua ultrapura e infraestructura de plantas, y las tuberías industriales representan ya el 70% de su mezcla de productos. En el exterior, Froch decidió en 2023 invertir en una planta en Marruecos para diversificar su base productiva y dirigirse a los mercados europeos. Tras ajustes previos de calendario, la instalación de equipos avanza, con la comercialización prevista para el cuarto trimestre, pruebas piloto a fin de año y producción comercial en el primer trimestre de 2027; se espera que la planta contribuya al beneficio una vez que la producción se estabilice. Tras la expansión de laminación en frío de YC INOX en Turquía, Froch está igualmente situando capacidad cerca de Europa, ya que los fabricantes de tubos taiwaneses recurren cada vez más a bases en terceros países para acceder al mercado europeo. Con el endurecimiento de los contingentes de la UE y la determinación del origen ahora basada en la fusión y colada, el origen de las bobinas de acero inoxidable que utilice la planta de Marruecos decidirá el estatus de origen y el contingente al que se enfrenten sus productos al entrar en Europa.
hace 4 horas
[SMM Noticias de acero inoxidable] YC INOX de Taiwán (PoC) se orienta hacia tubos de alto valor mientras la línea de laminación en frío en Turquía aumenta su producción
hace 5 horas
[SMM Noticias de acero inoxidable] YC INOX de Taiwán (PoC) se orienta hacia tubos de alto valor mientras la línea de laminación en frío en Turquía aumenta su producción
Leer más
[SMM Noticias de acero inoxidable] YC INOX de Taiwán (PoC) se orienta hacia tubos de alto valor mientras la línea de laminación en frío en Turquía aumenta su producción
[SMM Noticias de acero inoxidable] YC INOX de Taiwán (PoC) se orienta hacia tubos de alto valor mientras la línea de laminación en frío en Turquía aumenta su producción
YC INOX, fabricante taiwanés de tubos de acero inoxidable (PoC), continúa reconfigurando su mezcla de productos: las tuberías industriales, los tubos especiales limpios y los tubos de refrigeración líquida para centros de datos de IA representan casi el 70% de los envíos del primer semestre. La empresa fue rentable en el primer semestre, con resultados del segundo trimestre claramente mejores que los del primero. En el exterior, su filial turca registró un fuerte aumento de ingresos en el segundo trimestre y envíos récord en junio. La producción de la línea local de laminación en frío está aumentando, con el objetivo de incrementarla en aproximadamente un tercio, para reducir los costes de materia prima y evitar los aranceles de importación turcos sobre la bobina laminada en frío. La refrigeración líquida para IA está emergiendo como una nueva fuente de demanda de tubos de acero inoxidable, mientras que la laminación en frío local en Turquía permite eludir los aranceles de importación y acerca a la empresa a los mercados europeos y de Oriente Medio. Un punto a vigilar es de dónde obtiene la línea turca su materia prima laminada en caliente: si utiliza bobina negra de Indonesia u otros orígenes, cualquier exportación a la UE seguirá estando sujeta a las normas de origen de fusión y colada.
hace 5 horas