Production data of Electrolytic Aluminum and Alumina in China from SMM in June

Publicado: Jul 08, 2020 18:29 (GMT+8)
In June 2020, SMM China produced 3.004 million tons of electrolytic aluminum, an increase of 2.42 percent over the same period last year. By the end of June, the national operating capacity of electrolytic aluminum was 36.76 million tons per year. In June, SMM China produced 5.709 million tons of alumina, of which metallurgical grade alumina was 5.499 million tons, and the average daily output of metallurgical grade was 183000 tons, up 1.82 percent from the previous month and down 4.57 percent from the same period last year.

SMM, July 8:

Electrolytic aluminum:

According to SMM data, 3.004 million tons of electrolytic aluminum were produced in China in June 2020 (30 days), an increase of 2.42 per cent over the same period last year. By the end of June, the national operating capacity of electrolytic aluminum was 36.76 million tons / year, the completed capacity was 41.23 million tons / year, and the operating rate of national electrolytic aluminum enterprises was 89 percent. The overall operating rate was 0.3 percent higher than that at the end of May 2020. By the end of June, the operating capacity of domestic electrolytic aluminum has increased by 180000 tons / year compared with the end of May. Since June, under the stimulation of high profits, the domestic electrolytic aluminum production capacity has been gradually put into operation, and the monthly output growth rate has accelerated compared with the same period last year.

In the first half of 2020, the cumulative output of domestic electrolytic aluminum was 18.009 million tons, an increase of 2.93% over the same period last year; the cumulative consumption of domestic electrolytic aluminum was 17.69 million tons, and the cumulative year-on-year decline rapidly narrowed to 0.18%. Electrolytic aluminum continued to go to the warehouse in June, mainly due to the temperature at the supply end and the rise in demand for aluminum downstream. In July, the new capacity of electrolytic aluminum in Yunnan, Inner Mongolia and other places will continue to increase, and net imports are expected to increase slightly compared with June. SMM estimates that domestic electrolytic aluminum production in July (31 days) is 3.12 million tons, an increase of 1.79% over the same period last year, and the monthly consumption growth rate will narrow around 6.15% as supply rises and the margin of demand weakens.

Source: SMM

Alumina:

According to SMM data, China produced 5.709 million tons of alumina in June (30 days), of which metallurgical grade alumina was 5.499 million tons, and the average daily output of metallurgical grade was 183000 tons, an increase of 1.82% from the previous month and a decrease of 4.57% from the same period last year. In the first half of the year, China's cumulative metallurgical grade alumina output was 32.641 million tons, 7.6% lower than the same period last In the context of the mild rise in alumina prices during the month, the annual operating capacity of alumina in the northern region increased slightly compared with May, and the production reduction of individual alumina plants at the end of the month did not affect the output of that month.

As of the first ten days of July, the operating capacity of metallurgical grade alumina is 66.9 million tons, and the output of metallurgical grade alumina is expected to be 5.54 million tons in July (31 days), with the average daily output rising slightly to 184700 tons. On the whole, China's alumina market is still a month of increasing and reducing production in July. In terms of production reduction, the new materials of Chinalco Huaxing and Shanxi began to produce flexibly at the end of the month, and some alumina plants in southwest China had a roaster maintenance plan in July. In terms of increasing production, Guodian's Shanxi and Henan alumina plants have resumed or plan to resume production. Guodian Investment Sichuan will mass produce alumina products in July, and under the stimulation of rising alumina prices, there may be more reduced production capacity to resume production.

Source: SMM

 

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
hace 9 horas
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
Leer más
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
El laminador de aluminio avanzado de Henan Yirui inicia producción, apuntando al crecimiento en el mercado de alta gama
El 20 de septiembre, el laminador desbastador de chapa gruesa del proyecto de fabricación inteligente de nuevos materiales a base de aluminio con capacidad de 720.000 toneladas anuales de Henan Yirui New Materials Technology Co., Ltd. entró oficialmente en producción. Con una inversión total de 1.500 millones de RMB, el proyecto aprovecha la planta existente para construir una línea de laminación en caliente continua "1+4" de nivel internacional, respaldada por equipos de procesamiento de aluminio líderes en la industria, como hornos de recalentamiento de empuje. El proyecto también ha construido un sistema de IoT industrial capaz de monitorear en tiempo real y regular dinámicamente parámetros clave de producción como la fuerza de laminación y la temperatura, garantizando eficazmente la calidad estable de productos de aluminio de alta gama y aumentando continuamente la participación de mercado de productos de alto valor añadido.
hace 9 horas
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
hace 9 horas
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
Leer más
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
Guinea amplía la cooperación minera con Glencore y busca impulsar los ingresos y la industrialización
Guinea planea ampliar su cooperación con Glencore en el refinado de alúmina, energía, oro y metales básicos, con el objetivo de aumentar los ingresos mineros, promover el procesamiento local y la industrialización de los recursos minerales, y fortalecer la cooperación con los mercados y las empresas mineras internacionales de China, Oriente Medio y otras regiones.
hace 9 horas
Dingfeng Aluminum inicia la Fase II con el objetivo de alcanzar una capacidad anual de 200.000 toneladas en Camboya
hace 9 horas
Dingfeng Aluminum inicia la Fase II con el objetivo de alcanzar una capacidad anual de 200.000 toneladas en Camboya
Leer más
Dingfeng Aluminum inicia la Fase II con el objetivo de alcanzar una capacidad anual de 200.000 toneladas en Camboya
Dingfeng Aluminum inicia la Fase II con el objetivo de alcanzar una capacidad anual de 200.000 toneladas en Camboya
El 21 de septiembre se celebró la ceremonia de colocación de la primera piedra de la Fase II (Proyecto A3) de Dingfeng Aluminum Manufacturing (Cambodia) Co., Ltd., filial de Dihang Group. Ubicada en la Zona Económica Especial de la Carretera N.º 6, en la provincia de Kompung Cham, Camboya, Dingfeng Aluminum se dedica principalmente a la investigación, el desarrollo y la producción de varillas de aluminio de aleación de alta gama, perfiles de aluminio de alta gama y productos de apoyo para vehículos de nueva energía, y cuenta con un conjunto completo de procesos y equipos de producción que abarcan fundición y colada, extrusión, anodizado, procesamiento profundo, mecanizado de precisión y tratamiento de superficies. Una vez que la Fase II esté plenamente operativa, la capacidad de producción anual alcanzará las 200.000 toneladas, con un valor de producción anual de hasta 700 millones de dólares estadounidenses. La Fase II (Proyecto A3) contempla un taller de procesamiento para vehículos de nueva energía de 24.340 m² (edificio de estructura de acero de una sola planta), un taller de extrusión de 15.291 m² e instalaciones auxiliares como un edificio de oficinas, una caseta de vigilancia y una sala de distribución eléctrica.
hace 9 horas