Update: China January NEV production dropped 52.3% from a year ago

Publicado: Feb 17, 2020 17:21 (GMT+8)
China’s production of new energy vehicles dropped in the first month of 2020, as producers shut or trimmed output due to the Lunar New Year holiday and continued market weakness

(Added a chart of battery makers)

SHANGHAI, Feb 17 (SMM) – China’s production of new energy vehicles dropped in the first month of 2020, as producers shut or trimmed output due to the Lunar New Year holiday and continued market weakness.

 

About 48,000 NEVs produced in China obtained qualification certificates last month, down 52.3% from a year ago, according to SMM data. Passenger vehicles accounted for 43,000 units, or 88%, while 2,700 were buses, taking up 5.6%. The rest 3,100 were special vehicles, accounting for 6.4% of the total.

SMM data also revealed that 2.3GWh of power batteries were installed in January, down 53.5% year on year.

 

As the market remained lacklustre since the second half of last year, most of electric vehicle battery producers in China began their Lunar New Year holiday in early or middle of January, while some leading companies kept some of their production lines running.

 

A high statistical base also contributed to the sharp year-over-year decline in NEV production, as producers ramped up production in the same month of 2019, in anticipation of a cut in subsidies.

 

Chinese EV and battery producers were in low gear since the second half of 2019, as sales took a hit after the government sharply scaled back NEV subsidies. That, together with the coronavirus epidemic outbreak, is set to substantially subdue NEV production earlier this year, before the market recovers later in the year.

 

In terms of battery types, capacity of installed ternary batteries was 1.58GWh in January, accounting for 68.2% of the total installed EV batteries, while lithium iron phosphate batteries accounted for 31.2% or 0.72GWh, according to SMM data.

About 1.5GWh was installed in PVs, which primarily use NCM batteries, while buses and special vehicles favour LFP batteries. About 0.45GWh of batteries was installed in busses last month, while 0.17GWh was for special vehicles.

 

Source: SMM

 

In January, CATL, BYD and Guoxuan High-tech remained the top three battery makers in the Chinese market, and CATL maintained its first position with a 57.3% market share. The beginning of battery supply from South Korea’s LG and Japan’s Panasonic to Tesla, meanwhile, took the two battery makers to the fourth and fifth places.

The EV battery market concentration improved further last month, with CR10 at 94%, CR5 at 82.2% and CR3 at 76.3%.

 

Source: SMM

 

The latest SMM survey showed that most of battery makers in China have delayed their resumption by one to two weeks amid the epidemic outbreak. Factories in the top two EV battery producing hubs of south China’s Guangdong and east China’s Jiangsu, are required to remain shut until they get the approval from authorities. Workers, meanwhile, are required to isolate themselves for 14 days after they return from holidays.

SMM expects the broad recovery of Chinese EV battery makers to be at the end of February, with operating rates for the month remaining low.

 

China’s Association of Automobile Manufacturers (CAAM) said last week the virus will deliver a “huge shock” to the car industry, causing a worse impact than the SARS epidemic did in 2003. Demand for cars and will falter sharply in the near term, but is likely to see a brief consumption boom after the epidemic is over. The painful start to the year, however, is casting a shadow over the full-year performance for the Chinese industry in 2020.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
[SMM Metales Preciosos Express]
hace 2 horas
[SMM Metales Preciosos Express]
Leer más
[SMM Metales Preciosos Express]
[SMM Metales Preciosos Express]
Un equipo de investigación conjunto de Tailandia y China ha desarrollado una película fotocatalítica de heteroestructura In₂S₃-Ta₂O₅ codopada con platino (Pt) y rutenio (Ru) para degradar contaminantes de colorantes orgánicos bajo luz visible. El material optimizado demostró un alto rendimiento en pruebas de degradación de rodamina B, eliminando aproximadamente el 92,0 % del contaminante en 120 minutos.
hace 2 horas
[SMM Metales Preciosos Express]
hace 2 horas
[SMM Metales Preciosos Express]
Leer más
[SMM Metales Preciosos Express]
[SMM Metales Preciosos Express]
Se publicó el 17 de septiembre una solicitud de patente estadounidense (n.º de publicación US20260275453A1) titulada «Método para producir paladio a partir de lodos de plata», de Korea Zinc. La patente se centra en mejorar la eficiencia de la recuperación de paladio (Pd) a partir de lodos de plata, un subproducto del refinado de plata. El proceso propuesto consiste en separar el oro mediante disolución ácida, neutralizar la solución que contiene paladio para formar un precipitado con óxido de paladio, lixiviar el paladio y el platino (Pt) con ácido clorhídrico, seguido de precipitación de cloruros, y completar finalmente la purificación y recuperación del paladio.
hace 2 horas
[SMM Metales Preciosos Express]
hace 2 horas
[SMM Metales Preciosos Express]
Leer más
[SMM Metales Preciosos Express]
[SMM Metales Preciosos Express]
A medida que se acelera el envejecimiento de la población mundial, la demanda médica de enfermedades cardiovasculares, trastornos neurológicos y dolor crónico sigue en aumento. El platino, con su excelente biocompatibilidad, resistencia a la corrosión, conductividad eléctrica y visibilidad en rayos X, se ha convertido en un material crítico para dispositivos médicos avanzados. Desde stents coronarios y marcapasos implantables hasta implantes cocleares e interfaces cerebro-computadora, las aplicaciones del platino se extienden cada vez más hacia tecnologías médicas de alta precisión, miniaturizadas e implantables a largo plazo. En medicina cardiovascular, el platino se utiliza principalmente en catéteres, posicionamiento de stents y terapia electrofisiológica cardíaca.
hace 2 horas