[SMM Daily Review] Colored ups and downs are mixed, but black is up slightly across the board.

Publicado: Jun 05, 2019 16:30 (GMT+8)

SMM6 month 5 news: by the close, non-ferrous rise and fall, Shanghai lead rose 0.6%, Shanghai copper rose 0.43%, Shanghai aluminum, Shanghai zinc rose slightly, Shanghai nickel fell 0.44%, Shanghai tin fell slightly. Black closed higher, the increase is small, thread rose 0.7%, iron ore, hot coil rose 0.56%, bifocal rose slightly.

(Norsk Hydro), a Norwegian company, reported a total profit of 559 million Swiss kroner before tax in the first quarter of 2019, compared with 3.147 billion Swiss kroner in the same period last year. The decline in profit was mainly due to rising raw material prices and falling electrolytic aluminum prices. And the effect of production reduction in Alunorte alumina plant. Since hitting an all-time low of 740t on May 8, inventories have rebounded to 3510 tonnes, a more than two-year high, according to data released on Tuesday. As of May 31, Shanghai tin stocks fell for three consecutive times to 8203 tons. Shanghai aluminium stocks fell to their lowest level since May 1, according to data from the Institute, which fell ten times in the year to May 31, the lowest since September 1, 2017.

Brazilian antitrust agency Cade approved Vale's acquisition of iron ore producer Ferrous Resources, Vale after saying that the acquisition of Ferrous Resources would create logistics synergies for the development and integration of existing infrastructure. Societe Generale raised its forecast for iron ore prices in 2019 to $93 from $78 a tonne. The total inventory of building materials in Guangzhou this week was 1.1811 million tons, down 93200 tons (- 7.31 per cent) from the previous month, and + 2.59 per cent from the same period last year. Of these, thread inventory was 827000 tons, down 72000 tons (- 8.01 per cent) from the previous month,-0.78 per cent from the same period last year, and 354100 tons from the previous month, down 21200 tons (- 5.65 per cent) from the previous month, + 11.42 per cent from the same period last year.

SMM analyst's brief comment on June 5:

Copper: today, the main contract of Shanghai Copper opened at 46520 yuan per ton in the morning. Immediately after the opening, it reached a daily high of 46620 yuan per ton. Due to lack of market confidence, it was difficult for the high level to stabilize, so it fell immediately after reaching the high level. And within the range of 46490 46560 yuan / ton, the center of gravity of the disk moved up slightly to around 46570 yuan / ton in the afternoon. During this period, it tried to reach a high point many times, but it was difficult to stand firm. At the end of the day, it fell slightly and closed at 46490 yuan / ton, up 200yuan / ton. Up 0.43%. Today, Shanghai Copper 1907 contract position decreased by 8086 hands to 211000 hands, while trading volume increased by 8980 hands to 92000 hands. Shanghai Copper 1908 contract position increased 4408 hands to 189000 hands. Recently, we are concerned about the position change of Shanghai Copper 1907 and 1908 contracts. The Shanghai Copper Index fell 10, 000 hands to 604000 today, while trading volume rose 36000 hands to 235000. Last night, as a result of the Fed's speech, it strengthened the market's expectations of a rate cut. The US index fell, copper prices were slightly supported, the overall disk showed a concussive upward trend, short sellers continued to withdraw their funds from the market, and technical KDJ indicators crossed and strengthened. Copper prices to form a small support, and today closed at the physical Dayang column, and up the 10-day EMA, waiting for the outside market guidance at night to test whether Shanghai copper can break through the stable 46600 yuan / ton.

Aluminum: the 1907 contract of Shanghai Aluminum Company opened at 14080 yuan / ton in the morning, fluctuated in a narrow range around 14075 yuan / ton in the afternoon, and the price difference did not exceed 20 yuan per tonne. The bulls entered the market in the afternoon to push the price up, but fell back quickly after touching an intra-day high of 14105 yuan per ton. The end of the day continued to fluctuate at 14085 yuan per ton. The trend of Shanghai aluminum was relatively stable and fluctuated slightly during the day, closing at 14085 yuan per ton, up 10 yuan per ton, up 0.07 percent, trading volume decreased by 68478 hands to 77048 hands, and position volume decreased by 7834 hands to 222000 hands. Today, short positions were mainly reduced, closing at the Xiaoyang line. However, it is still not below the 40-day moving average and the center of gravity is basically the same as yesterday. Judging from the trend of Shanghai aluminum, there is still a certain degree of support at Wansi pass, as aluminum metal fundamentals have not changed significantly today, continue to pay attention to the evening market atmosphere and long short position changes.

Zinc: today, Shanghai zinc completed the main month change, Shanghai zinc 1907 contract opened at 20360 yuan / ton, more into the air at the beginning of the day, Shanghai zinc upward touch high 20390 yuan / ton, but failed to stand firm and quickly fell back to 20275 yuan / ton line to find support, and then the short position left the market substantially. Shanghai zinc was boosted up to a smooth and volatile operation above the daily average, with an operating range of no more than 30 yuan / ton. Shanghai zinc fell to about 20260 yuan / ton, closing down to 20275 yuan / ton, down 30 yuan / ton, or 0.15%, from the previous transaction. Trading volume was reduced by 130000 hands to 310000 hands, and positions by 4100 hands to 262000 hands. The main 1908 contract of Shanghai zinc opened at 19950 yuan / ton, and at the beginning of the day, the short position reduced and raised 20040 yuan / ton, and then the short position increased, dragging down the Shanghai zinc to find support near the daily average line, and then rose slightly. The center of gravity of the operation was moved up to a narrow range of 19960 yuan / ton, the operating range was no more than 30 yuan / ton, the short position at the end of the plate came into the market substantially and pressed the zinc price, and the zinc in Shanghai quickly went down 19845 yuan / ton before finishing slightly, closing down to 19875 yuan / ton. Compared with the previous transaction, it fell 70 yuan per ton, or 0.35%. Trading volume increased by 13658 hands to 18226 hands, and position volume increased by 5838 hands to 267000 hands. During the day, Shanghai zinc ran smoothly as a whole, and the end of the plate was obviously suppressed by short positions, and the whole plate jumped off all EMA. The KDJ index turned down, indicating that Shanghai zinc still had no significant upward action energy. However, the Dragon Boat Festival holiday was just around the corner, and spot trading was boosted to a certain extent. Show that the market consumption is not fully weak, Shanghai zinc is expected to fall at night or no deep decline, night or by the outside market to boost the high opening and finishing operation.

Lead: within a day, the main 1907 contract of lead in Shanghai was opened at 16045 yuan / ton. At the beginning of the day, some short sellers made a profit and left the market, and the concussion of lead in Shanghai rose to around 16100 yuan / ton. How could Nai long leave the market at a high risk, and the pressure on lead in Shanghai was as low as 15965 yuan / ton? After running along the 16010 yuan / ton line, finally closed at 16030 yuan / ton, up 95 yuan / ton, an increase of 0.6%, and the position was reduced by 2684 hands to 49124 hands. Shanghai lead close Xiaoyang line, the recent red is caused by short departure, there is no sign of long entry, so it is difficult to have sustained upward momentum, coupled with the 5, 10-day moving average trend flattened, it is expected that Shanghai lead may continue the horizontal market at night.

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
La RDC lanza un programa de cartografía geológica aérea de 36 meses con el objetivo de alcanzar una cobertura geocientífica del 46,1 %
hace 1 minuto
La RDC lanza un programa de cartografía geológica aérea de 36 meses con el objetivo de alcanzar una cobertura geocientífica del 46,1 %
Leer más
La RDC lanza un programa de cartografía geológica aérea de 36 meses con el objetivo de alcanzar una cobertura geocientífica del 46,1 %
La RDC lanza un programa de cartografía geológica aérea de 36 meses con el objetivo de alcanzar una cobertura geocientífica del 46,1 %
La República Democrática del Congo ha lanzado un programa nacional de cartografía geofísica y geológica aerotransportada de 36 meses, con el objetivo de ampliar la cobertura geocientífica nacional del 22,27 % al 46,1 %, según el Ministerio de Minas y el Servicio Geológico Nacional del Congo. El programa, conocido como PC2G-RDC, desplegará ocho aeronaves para recopilar datos magnéticos, radiométricos, gravimétricos y electromagnéticos de alta resolución en regiones prioritarias como Kongo Central, Kwango, Kwilu, el Gran Kasai y el Gran Katanga. El programa está coordinado por el Servicio Geológico Nacional del Congo, financiado por el Fonds Minier pour les Générations Futures y ejecutado por la empresa geofísica española Xcalibur Multiphysics Group. La ampliación aumentaría la cobertura geocientífica cartografiada en 23,83 puntos porcentuales, más del doble del nivel actual. Las autoridades congoleñas estiman que menos del 10 % del país ha sido explorado a fondo, a pesar de que la RDC ya es el mayor productor de cobre de África y el mayor productor de cobalto del mundo. La última fase de prospección se basa en los trabajos geológicos realizados anteriormente en el Gran Katanga, la principal región productora de cobre y cobalto del país, al tiempo que extiende la cartografía aerotransportada sistemática a zonas menos exploradas de la RDC. Los estudios tienen por objeto identificar anomalías geofísicas y mejorar los conjuntos de datos geológicos utilizados para priorizar las zonas de exploración terrestre posterior. El Gobierno espera que los conjuntos de datos resultantes reduzcan la incertidumbre geológica para la exploración futura, mejoren la identificación de zonas minerales prospectivas y refuercen la capacidad del Estado para evaluar las oportunidades de desarrollo minero. Cualquier anomalía identificada mediante los estudios aerotransportados requeriría verificación sobre el terreno, trabajos geoquímicos y perforaciones antes de poder establecer un yacimiento mineral. APAnews Elevar la cobertura geocientífica nacional del 22,27 % al 46,1 % ampliaría de forma sustancial la cantidad de datos geológicos modernos disponibles para la exploración minera en la RDC. Para el sector del cobre, el impacto inmediato se centra en la eficiencia de la exploración más que en la oferta minera: la mejora de los conjuntos de datos aerotransportados puede acotar las zonas objetivo antes de que las empresas comprometan capital en trabajos de campo detallados y perforaciones. Dado que menos del 10 % del país ha sido explorado a fondo, el programa podría ampliar la cartera a largo plazo de objetivos de exploración de cobre más allá del establecido Cinturón del Cobre del Gran Katanga. Sin embargo, el programa en sí no añade reservas ni producción; cualquier anomalía prospectiva requeriría años de exploración y desarrollo de seguimiento antes de contribuir a la oferta de cobre.
hace 1 minuto
GoldMining intersecta 400 m de mineralización de oro y cobre en Yarumalito, Colombia
hace 6 minutos
GoldMining intersecta 400 m de mineralización de oro y cobre en Yarumalito, Colombia
Leer más
GoldMining intersecta 400 m de mineralización de oro y cobre en Yarumalito, Colombia
GoldMining intersecta 400 m de mineralización de oro y cobre en Yarumalito, Colombia
GoldMining Inc. ha informado los primeros resultados de ensayo de su programa de perforación diamantina 2026 en el proyecto de oro-cobre Yarumalito, de su propiedad al 100%, en Antioquia, Colombia, destacando un amplio intervalo de mineralización continua de estilo pórfido desde la superficie. El pozo YAR-45 arrojó 399,9 metros con leyes de 0,34 g/t de oro, 0,09% de cobre y 1,21 g/t de plata, equivalentes a 0,45 g/t de oro equivalente, desde la superficie hasta el final del pozo. El intervalo incluyó 74,7 metros con leyes de 0,46 g/t de oro, 0,13% de cobre y 1,41 g/t de plata, equivalentes a 0,61 g/t de AuEq. GoldMining Inc. Dentro de ese intervalo más amplio, GoldMining también informó 47,0 metros con leyes de 0,54 g/t de oro, 0,14% de cobre y 1,72 g/t de plata, equivalentes a 0,70 g/t de AuEq, así como un intervalo separado de 36,0 metros con leyes de 0,50 g/t de oro, 0,14% de cobre y 1,07 g/t de plata, equivalentes a 0,65 g/t de AuEq. GoldMining Inc. GoldMining señaló que el pozo YAR-45 permaneció en alteración y mineralización de intensidad variable desde la superficie hasta su profundidad final de 399,9 metros. La compañía interpretó los resultados como un respaldo a la continuidad de la fase intrusiva P-1, que identifica como el principal huésped de la mineralización de oro-cobre de estilo pórfido en Yarumalito. GoldMining Inc. Los resultados de ensayo de tres pozos adicionales —YAR-46, YAR-47 y YAR-48— siguen pendientes. Los pozos se perforaron a profundidades de 251,2 metros, 263,25 metros y 304,1 metros, respectivamente. GoldMining Inc. El resultado del pozo YAR-45 confirma un amplio intervalo de mineralización de oro-cobre desde la superficie y proporciona información geológica adicional sobre la continuidad de la fase intrusiva mineralizada P-1. Sin embargo, los intervalos informados son longitudes a lo largo del pozo y no anchos reales, que GoldMining estima actualmente en aproximadamente el 50% de los intervalos a lo largo del pozo. La atención se centrará ahora en los ensayos pendientes de los tres pozos restantes y en si respaldan una mayor definición o expansión del sistema mineralizado.
hace 6 minutos
Canterra amplía los recursos indicados de Lundberg en un 55 % hasta 26,1 Mt en Terranova
hace 8 minutos
Canterra amplía los recursos indicados de Lundberg en un 55 % hasta 26,1 Mt en Terranova
Leer más
Canterra amplía los recursos indicados de Lundberg en un 55 % hasta 26,1 Mt en Terranova
Canterra amplía los recursos indicados de Lundberg en un 55 % hasta 26,1 Mt en Terranova
Canterra Minerals ha anunciado una estimación actualizada de recursos minerales para su yacimiento de cobre y zinc Lundberg, parte del proyecto Buchans, 100 % propiedad de la compañía en Terranova, Canadá, con un aumento del 55 % en el tonelaje de recursos indicados hasta aproximadamente 26,1 millones de toneladas métricas. El recurso indicado actualizado totaliza 26,08 millones de toneladas métricas con leyes de 0,36 % de cobre, 1,31 % de zinc, 0,56 % de plomo, 5,02 g/t de plata y 0,06 g/t de oro. Esto se compara con los 16,79 millones de toneladas métricas con ley de 0,42 % de cobre de la estimación anterior de 2019. El recurso indicado actualizado contiene aproximadamente 94.800 toneladas métricas de cobre, 341.600 toneladas métricas de zinc y 146.200 toneladas métricas de plomo. El cobre equivalente contenido aumentó un 34 % hasta aproximadamente 226.200 toneladas métricas en comparación con la estimación anterior. La estimación actualizada incorpora 4.779 metros de perforación completados desde que Canterra adquirió el proyecto en 2024, junto con una envolvente de tajo optimizada basada en supuestos actualizados de precios de metales. Aproximadamente el 97 % del tonelaje de recursos minerales reportado está clasificado como indicado, y el resto como inferido. Canterra señaló que la exploración reciente ha extendido la mineralización al noreste y noroeste del yacimiento e identificado mineralización adicional de sulfuros masivos en la zona Two Level. Los resultados de aproximadamente 6.000 metros de perforación adicional siguen pendientes, y se esperan más reportes durante el resto de 2026 y hasta 2027. Análisis de SMM: El aumento del 55 % en el tonelaje de recursos indicados de Lundberg y del 34 % en el cobre equivalente contenido amplían materialmente la escala del yacimiento. Sin embargo, la ley promedio de cobre indicado disminuyó del 0,42 % en la estimación de 2019 al 0,36 % en el recurso más reciente, lo que hace que el trabajo técnico futuro sea importante para evaluar los requisitos de procesamiento y la economía del proyecto. La atención se centrará ahora en los resultados de perforación pendientes y en una mayor evaluación del potencial de desarrollo del yacimiento. El recurso actualizado representa mineralización in situ y no producción de cobre económicamente recuperable.
hace 8 minutos