SMM Nickel PMI Comes in at 60.74 in July, SMM Surveys

Publicado: Aug 02, 2017 11:19 (GMT+8)
SMM survey finds that nickel purchase managers’ index (PMI) was 60.74 in July.

SHANGHAI, Aug. 2 (SMM) – SMM survey finds that nickel purchase managers’ index (PMI) was 60.74 in July. The reading, standing much higher than 50, is due mainly to high production activities at stainless steel mills for decent orders. PMIs from other downstream sectors, including electroplating, battery, and alloy were below 50 in July.  

Indonesia Issues New Nickel Ore Export Quota

By sub-indicator
Production Grows

The composite production index was 63.23% in July. Expansion of the reading indicates that downstream demand was not weak in the off-season. 

Decent New Orders
In July, new orders were positive, with the index at 56.74%, but new export orders waned along with negative impact on stainless steel and battery exports from summer break in Europe, with the reading at 49.01%.

Finished Goods Inventories Fall
The composite finished goods inventory index was 24.33% in July, as decent new orders sent down finished goods inventories at nickel downstream producers. 

Stock-piling Demand Increases
The composite raw material inventory index was 66.60% in July, and high stock-piling activities echoed decent new orders.  

What’s Nickel Price Outlook after Shining Week? SMM Reports

Nickel PMI by Downstream Industry
In July, stainless steel PMI was 65.12%, while PMIs from other nickel downstream sectors, including electroplating, battery and alloy were below 50, especially the latter two. Battery PMI was 34.61% in July as some export-oriented large battery producers reported low production and poor orders, while other producers suffered from high temperature. Alloy PMI was 36.79% in July for two factors. First, some alloy producers ran at low rates due to summer heat, sending down production index below 50. Second, most of alloy producers reported poor orders, and rising nickel price further weakened their buying interest in raw materials. 

Electroplating Industry
Electroplating PMI was 48.06% in July, with index of production and new orders at 31.16% and 40%, respectively, all below the 50 mark. High temperature and environmental factor in some regions depressed production at electroplating producers. Orders waned in July. Some producers made moderate raw material purchases as they expected to grow output after environmental protection inspections. 

Alloy Industry
Alloy PMI was 36.79% in July. Production at alloy producers was mainly influenced by high temperature and poor orders, and conditions varied much by size of producers. Large producers receive orders mainly from military, nuclear power, petrochemical sectors, and those orders are largely completed in the first half of the year. Hence, orders at large producers from those high-end industries began to wane in the second half of the year. Small producers reduced production due to high temperature, both sending down the production index across the sector. Alloy producers also reduced raw material inventories due to falling expectations over order growth.  

Battery Industry
Battery PMI was 34.61% in July. Battery producers reported weak export orders and low production over the month, and they also cut raw material inventories. 

Stainless Steel Industry
Stainless Steel PMI was 65.12% in July thanks to decent new orders, high production and stock-piling activities. In July, stainless steel mills showed high production enthusiasm as rapid price gains after purchases by downstream producers and traders created high profits. Stainless steel plants also entered the market for raw material purchases for production needs. 

Other Industries 
PMI in other nickel downstream sectors was 35% in July. High temperature negatively affected production and orders over the month. Meanwhile, nickel demand from those sectors is relatively smaller, and producers in those sectors mainly purchase raw material based on orders. Hence, poor orders reduced their demand for raw materials, with the index weakening. 

Forecast for Orders in August 
Based on SMM survey of new orders at nickel downstream sectors, the new order index in the stainless steel sector is expected to remain high in August, and orders in the electroplating sector is also estimated to be higher than July’s with the end of environmental protection inspections in some regions. 

For news cooperation, please contact us by email: sallyzhang@smm.cn or service.en@smm.cn.
 

Declaración de Fuente de Datos: Excepto la información disponible públicamente, todos los demás datos son procesados por SMM basándose en información pública, comunicación de mercado y confiando en el modelo de base de datos interna de SMM. Son solo para referencia y no constituyen recomendaciones para la toma de decisiones.

Para cualquier consulta o para obtener más información, por favor contacte: lemonzhao@smm.cn
Para más información sobre cómo acceder a nuestros informes de investigación, contacte con:service.en@smm.cn
Noticias relacionadas
El factor de sentimiento del NPI de alta ley de SMM disminuye a 1,78 en medio del persistente tira y afloja del mercado
hace 11 horas
El factor de sentimiento del NPI de alta ley de SMM disminuye a 1,78 en medio del persistente tira y afloja del mercado
Leer más
El factor de sentimiento del NPI de alta ley de SMM disminuye a 1,78 en medio del persistente tira y afloja del mercado
El factor de sentimiento del NPI de alta ley de SMM disminuye a 1,78 en medio del persistente tira y afloja del mercado
[Flash de níquel de SMM] El 21 de septiembre, el factor de sentimiento del mercado de NPI de alta ley de SMM se situó en 1,78, con una caída intermensual de 0,01. El factor de sentimiento aguas arriba del NPI de alta ley fue de 1,84, con una caída intermensual de 0,02, mientras que el factor de sentimiento aguas abajo del NPI de alta ley fue de 1,72, sin cambios intermensuales. El tira y afloja en el mercado de NPI continuó hoy.
hace 11 horas
La sequía de El Niño en Indonesia podría afectar la producción de arrabio de níquel en el parque IMIP
hace 12 horas
La sequía de El Niño en Indonesia podría afectar la producción de arrabio de níquel en el parque IMIP
Leer más
La sequía de El Niño en Indonesia podría afectar la producción de arrabio de níquel en el parque IMIP
La sequía de El Niño en Indonesia podría afectar la producción de arrabio de níquel en el parque IMIP
[SMM Flash de níquel] 21 de septiembre - Según SMM, debido al fenómeno de El Niño, Indonesia ha experimentado condiciones de sequía, con presión sobre el suministro local de agua de producción y alteraciones en las condiciones de transporte. La producción de ferroníquel en el parque industrial IMIP de Indonesia podría verse afectada en octubre, aunque los planes de producción específicos aún no se han aclarado. Dados los niveles actuales de inventario en el mercado, se espera que el impacto en el patrón general de oferta y demanda sea limitado a corto plazo. SMM continuará monitoreando los cambios en el suministro de agua y las operaciones de producción en el parque.
hace 12 horas
Datos: Movimiento del mercado SHFE, DCE (21 de septiembre)
hace 13 horas
Datos: Movimiento del mercado SHFE, DCE (21 de septiembre)
Leer más
Datos: Movimiento del mercado SHFE, DCE (21 de septiembre)
Datos: Movimiento del mercado SHFE, DCE (21 de septiembre)
La siguiente tabla muestra el movimiento de metales ferrosos y no ferrosos en la SHFE y la DCE el 21 de septiembre de 2026
hace 13 horas