[SMM Analysis] Peak-Season Warm-Up Continued to Fall Short, SS Futures Broke Below the 14,000 Threshold; Inventory Buildup Persisted, Losses at the Margin Provided a Floor

Published: Aug 28, 2026 15:55

SMM data showed that this week (August 24-28), the most-traded stainless steel contract broke down on weakness, with volatility intensifying and the center continuing to move lower. On Monday (8/24) it was quoted at 14,260 yuan/mt; on Tuesday (8/25) it pulled back to 14,145 yuan/mt; on Wednesday (8/26), affected by news of supply disruptions on the NPI side, market concerns over supply briefly heated up, driving futures to rebound after shooting up to 14,270 yuan/mt. However, the bullish catalyst lacked persistence and the core bearish logic remained unchanged; it then fell back to 14,070 yuan/mt on Thursday (8/27). On Friday (8/28) it continued to edge lower and closed at 13,985 yuan/mt, officially breaking below the key 14,000 yuan/mt level. For the week, it fell 220 yuan/mt from last Friday’s (8/21) close of 14,205 yuan/mt, a decline of 1.55%, with bearish sentiment continuing to be released.

Macro and news-wise, hawkish rhetoric from the US Fed further strengthened. Cleveland Fed President Hammack reiterated an anti-inflation stance, saying the current level of restrictiveness in interest rates was still insufficient; Boston Fed President Collins said it was appropriate to raise rates “as soon as possible” in the absence of evidence of a sustained pullback in inflation; Kansas City Fed President Schmid believed policy remained relatively accommodative and inflation was still above target; Chicago Fed President Goolsbee said the biggest near-term concern was that inflation was not under control, and tariff- and war-related price increases posed challenges to the US Fed; Richmond Fed President Barkin warned that if debt continued to rise, investors would sooner or later stop buying US Treasuries. On the data front, the US July PCE price index came in at 3.7% YoY, flat from the prior month and above the market expectation of 3.6%, slightly lifting market expectations for a rate hike next month; July new home sales fell to a six-month low, consumer confidence dropped to the lowest level of the year, and the July goods trade deficit hit a new high since March 2025. The ECB meeting minutes also showed that another rate hike might still be needed if the inflation outlook did not improve significantly.

In the Middle East, there were signs of a phased easing, though reversals remained possible. Trump said he had been notified by the US Navy that all mines in international waters of the Strait of Hormuz had been removed or detonated; Iran and Oman issued a joint statement proposing to establish a mutually agreed secure maritime corridor in the strait, but Iran stressed the strait would not reopen immediately, and as of Friday the two sides were still consulting on specific details, with the agreement not yet finalised. An Iranian parliamentary committee approved charging service fees to vessels transiting the strait (the bill pending a plenary vote), and had decided to allow some Iraqi oil tankers to pass; crude oil exports from Kuwait and Qatar through the strait had recovered to 70% of pre-conflict levels. Meanwhile, the US Treasury announced an expansion of secondary sanctions, imposing sanctions on entities and countries worldwide that still maintained commercial ties with Iran, covering areas such as technology, gold, aviation, and shipping, and sanctioning nearly 60 entities, individuals, and vessels; Iran responded that any country participating in restrictions on Iran’s economy would be regarded as an enemy. Morgan Stanley raised its Q4 Brent crude price expectations to a peak of $100 per barrel. Trade frictions also escalated: Canada refused to finalise a trade agreement with the US and will impose retaliatory tariffs of 15%, 25%, or 50% on about $20 billion of US products starting September 8; the US side was considering an additional 7.5% tariff on China, and China’s Ministry of Commerce responded that the US launching a Section 301 investigation against 16 economies including China on the grounds of “overcapacity” was a typical act of unilateralism and protectionism, which China firmly opposed.

In China, the Ministry of Finance issued a notice on further improving fiscal-financial coordination to boost domestic demand, and disclosed that since the beginning of this year it had allocated 187.5 billion yuan in trade-in funds for consumer goods, driving related product sales of about 1.32 trillion yuan and benefiting 178 million person-times; the PBOC conducted a 500 billion yuan one-year MLF operation on August 25, and carried out overnight reverse repo operations from August 27 to September 1 with a daily cap of 600 billion yuan. National Energy Administration data showed that from January to July, total electricity consumption rose 4.7% YoY; as of end-July, cumulative installed power generation capacity nationwide reached 4.08 billion kW, up 11.0% YoY. Notably, Shanghai explicitly proposed expanding trading scale in key metal categories such as copper and aluminum, accelerating improvements to the futures product lineup for emerging metals such as lithium, cobalt, and nickel, which was positive for medium and long-term liquidity building in nickel-related products.

Fundamentals-wise, demand ahead of the peak season continued to be absent, and the contradiction of loose supply and demand became more pronounced. It was already late August and approaching the traditional “September-October peak season,” but the expected end-use stock up in advance had not started as scheduled; downstream rigid demand remained weak, on-market transactions stayed sluggish, and overall market confidence was insufficient. Supply-demand pressure continued to build: weak end-user purchasing combined with relatively heavy overall shipments pressure, and steel mills mainly adopted a strategy of actively selling and reducing their own inventory, driving the release of incremental supply in circulation—SMM weekly data showed that 300-series social inventory rose to 588,000 mt this week (August 27), up 2,000 mt from 586,000 mt in the prior period (August 20), up 0.34% MoM, with the inventory buildup pattern continuing. Meanwhile, mainstream steel mills offered price compensation for earlier agent allocations, and the hold prices firm strategy clearly loosened, further weakening support for the spot price; coupled with the continued breakdown and decline in futures, the spot price center followed suit and kept pulling back.

Cost and profit-wise, finished product and nickel-related raw material prices fell in tandem, but finished product declined more deeply due to being dragged by futures. High-grade NPI fell continuously this week from 1,131.5 yuan/nickel unit on Monday to 1,126 yuan/nickel unit on Friday, down a cumulative 5.5 yuan over the week; the latest weekly average price for high-carbon ferrochrome (the week of August 21) was 7,925 yuan/mt (50% metal content), down 10 yuan from 7,935 yuan/mt (50% metal content) in the prior period (the week of August 14). The decline on the raw material side was relatively mild, while finished product fell 1.55% over the week; the price spread between finished product and raw materials continued to narrow, further squeezing steel mill smelting profits, and the industry as a whole was already on the verge of losses. Rigid support on the cost side gradually became more evident, effectively offsetting part of the futures bearish factors and supply-demand pressure, keeping the downside in spot relatively controllable; the market showed a subdued tone but was unlikely to see a deep drop.

Overall, this week the stainless steel market showed a tug-of-war pattern featuring a retreat after rapid rise and breakdown in futures, a miss in peak-season preheating demand, loosening steel mill efforts to hold prices firm, continued inventory buildup, and cost support as losses neared. Although NPI-side disruptions briefly brought expectations of supply contraction during the week, under the fundamental pressure of persistently weak demand and continued inventory accumulation, a single supply disruption was unlikely to reverse the market’s core logic. In the short term, weak end-use demand, inventory buildup, and bear-led futures were the key bearish factors, making it difficult to reverse the weak pattern; however, the risk of losses continued to constrain downside room, and the market was likely to maintain consolidate on a subdued note. Going forward, key items to track include the persistence of downside after the SS futures breakdown, the pace of downstream peak-season stockpiling implementation, changes in steel mill shipments and hold prices firm policies, changes in the raw material–finished product price spread, and the progress of social inventory buildup, while also watching whether the Strait of Hormuz secure corridor agreement can ultimately be implemented and how it transmits to the cost side.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Peak Season Expectations Dashed, Stainless Steel Finished Product Costs Fall Across the Board, Steel Mills Continue to Suffer Losses [SMM Analysis]
1 hour ago
Peak Season Expectations Dashed, Stainless Steel Finished Product Costs Fall Across the Board, Steel Mills Continue to Suffer Losses [SMM Analysis]
Read More
Peak Season Expectations Dashed, Stainless Steel Finished Product Costs Fall Across the Board, Steel Mills Continue to Suffer Losses [SMM Analysis]
Peak Season Expectations Dashed, Stainless Steel Finished Product Costs Fall Across the Board, Steel Mills Continue to Suffer Losses [SMM Analysis]
[SMM Analysis] Peak Season Expectations Fall Short, Stainless Steel Product Prices and Production Costs Both Decline, Steel Mills Continue to Incur Losses This week, stainless steel product prices and production costs pulled back in tandem, and stainless steel mills remained loss-making. For 304 cold-rolled stainless steel, the profit margin based on current raw materials this week was -0.37%, while that based on inventory raw materials was -0.98%. Nickel raw material side, high-grade NPI prices fell further this week. Expectations for a peak season recovery in stainless steel demand fell short. Coupled with the drag from falling SS futures and rising port inventories of high-grade NPI, market pessimism deepened further, transactions remained weak, some stainless steel mills were reported to have made 300-series production cuts, and NPI prices overall remained in the doldrums. As of this Friday, China's tax-inclusive landed price for 10-12% grade Indonesian high-grade NPI fell by 5.5 yuan/nickel unit to 1,126 yuan/nickel unit. Stainless steel scrap prices were temporarily stable this week. During the week, SS futures trended lower, bearish sentiment spilled over to the spot market, stainless steel products and high-grade NPI weakened in tandem, and the overall market tone was bearish. Stainless steel scrap found support from its cost-substitution advantage, and its prices did not follow the decline in futures. However, cost support ultimately could not withstand fundamental pressure. Recovery expectations for the "September-October peak season" fell short, downstream demand was insufficient, steel mill profits narrowed, procurement attitudes were cautious, market expectations for a bullish turn in September futures were subdued, and overall transactions were sluggish. With multiple bearish factors stacking up, cost support continued to weaken. In the short term, stainless steel scrap lacked upward momentum, and the market was likely to remain weak. As of this Friday, mainstream 304 off-cuts in the Shanghai area, excluding tax, ...
1 hour ago
Persistent Weakness in Spot and Futures Weighs on Market Sentiment; Cost Advantages Provide Support, Keeping Stainless Steel Scrap Prices Temporarily Stable [SMM Stainless Steel Scrap Market Weekly Review]
1 hour ago
Persistent Weakness in Spot and Futures Weighs on Market Sentiment; Cost Advantages Provide Support, Keeping Stainless Steel Scrap Prices Temporarily Stable [SMM Stainless Steel Scrap Market Weekly Review]
Read More
Persistent Weakness in Spot and Futures Weighs on Market Sentiment; Cost Advantages Provide Support, Keeping Stainless Steel Scrap Prices Temporarily Stable [SMM Stainless Steel Scrap Market Weekly Review]
Persistent Weakness in Spot and Futures Weighs on Market Sentiment; Cost Advantages Provide Support, Keeping Stainless Steel Scrap Prices Temporarily Stable [SMM Stainless Steel Scrap Market Weekly Review]
[SMM Stainless Steel Scrap Market Weekly Review] Continued Weakness in Futures and Spot Weighed on Market Sentiment; Cost Advantages Provided a Floor, Keeping Stainless Steel Scrap Prices Temporarily Steady This week, prices of 304 stainless steel scrap off-cuts in east China held flat, with a quotation range of 10,250-10,350 yuan/mt; prices of 304 stainless steel scrap off-cuts in Foshan also stayed steady, with a price range of 10,150-10,450 yuan/mt. From the perspective of raw material production costs, the cost of producing stainless steel entirely from stainless steel scrap was about 14,426.56 yuan/mt, while the cost of producing it entirely from high-grade NPI reached 14,885.76 yuan/mt, and the two still maintained a certain cost spread advantage. This week, stainless steel scrap prices overall temporarily remained steady. During the week, SS futures fell further to new lows, with bearish sentiment in futures continuing to be released and transmitted to the spot cargo market, driving finished stainless steel prices to pull back in tandem; prices of the substitute raw material high-grade NPI also remained in the doldrums, and the overall sentiment across futures, spot, and the raw material side was bearish. However, stainless steel scrap still retained certain economic advantages over high-grade NPI, and its cost-substitution attribute continued to provide a floor, supporting stainless steel scrap prices to temporarily stay stable this week, without falling in tandem with futures. Overall, the cost floor was difficult to offset the bearish fundamentals. The market’s previously held expectations for a consumption recovery during the September-October peak season fell short, downstream demand provided insufficient support, and coupled with a marked narrowing of stainless steel mills’ own profit margins, raw material procurement sentiment remained cautious amid pressure on the production side. The market’s expectations for a rise in September futures were weak, further weighing on steel mills’ willingness to restock, and this week stainless steel scrap...
1 hour ago
[SMM Analysis] Futures Broke Below Key Support and Moved Lower; Peak-Season Preheating Fell Through, and Stainless Steel Inventory Continued a Mild Buildup
2 hours ago
[SMM Analysis] Futures Broke Below Key Support and Moved Lower; Peak-Season Preheating Fell Through, and Stainless Steel Inventory Continued a Mild Buildup
Read More
[SMM Analysis] Futures Broke Below Key Support and Moved Lower; Peak-Season Preheating Fell Through, and Stainless Steel Inventory Continued a Mild Buildup
[SMM Analysis] Futures Broke Below Key Support and Moved Lower; Peak-Season Preheating Fell Through, and Stainless Steel Inventory Continued a Mild Buildup
[SMM Analysis] Futures Broke Key Support and Fell, Peak-Season Warm-Up Fell Through; Stainless Steel Inventory Continued a Mild Buildup SMM News on August 27: This week, stainless steel social inventory continued to build up, with the inventory midpoint moving further higher and pressure from piled-up market supply steadily increasing. Total inventory in the two core markets of Wuxi and Foshan rose further, from 925,100 mt on August 20, 2026 to 927,300 mt in the latest period, up 0.24% WoW. The pace of inventory buildup persisted, and industry-wide inventory pressure continued to intensify. This week, expectations for a peak-season recovery in the stainless steel market fell through completely, and persistently weak end-use demand was the core driver of the inventory buildup. Entering late August, the market’s traditional September-October peak season stock-up-in-advance cycle did not materialize; the lack of recovery in rigid end-use demand, together with a further dip in SS futures during the week that effectively broke below the key support level of 14,000 yuan/mt, kept market pessimism fermenting. Wait-and-see sentiment among downstream players and traders intensified, spot purchase transactions remained sluggish, and the efficiency of supply digestion stayed low. Supply-side pressure also increased in tandem: steel mills’ production schedule rebounded somewhat this month, overall supply releases remained ample, and with steel mills facing relatively heavy pressure to draw down their own inventory, willingness to sell was strong. Supply at the circulation end continued to be released, pushing social inventory to accumulate steadily. Overall, the key reasons stainless steel inventory continued to build up this week were that weakening futures after breaking key levels undermined market confidence, pre-peak-season demand was absent, and terminal transactions remained depressed; high production schedules at steel mills, coupled with proactive selling, further amplified inventory pressure. At present, weak stainless steel fundamentals continued to dominate the market, and short-term demand…
2 hours ago