[SMM Analysis] Futures Market Weakness Coupled with Sluggish Off-Season Demand, Limited Arrivals Saw Stainless Steel Inventory Post a Slight Buildup and Hold Steady

Published: Aug 13, 2026 17:54

Save

[SMM Analysis] Futures Weakness and Sluggish Off-Season Demand; Stainless Steel Inventory Posts Slight Buildup and Remains Stable on Limited Arrivals SMM, August 13 – This week, stainless steel social inventory shifted from prior destocking to a slight buildup, with the overall inventory level basically stable and off-season inventory pressure rising at the margin. Total inventories in the two core markets of Wuxi and Foshan edged up from 915,200 mt on August 6, 2026, to 915,900 mt in the latest period, up 0.08% WoW. The buildup was modest, and overall inventory maintained a stable trend. This week, the stainless steel market continued to follow the traditional off-season pattern. Early recovery signals ahead of the September-October peak season had yet to emerge, and rigid demand from end-users remained weak. During the week, SS futures pulled back repeatedly. Wait-and-see sentiment strengthened among traders and downstream users, and most downstream end-users maintained a need-based, hand-to-mouth purchasing pattern. Spot transactions in the market were generally weak, and the destocking efficiency of cargoes was low, creating the core fundamental pressure behind the inventory buildup. On the supply and distribution side, there were temporary offsetting factors. At the beginning of this week, weather disruptions from Typhoon Dolphin constrained logistics shipments and the pace of spot arrivals in east China. The pace of market supply replenishment slowed, effectively offsetting the incremental buildup caused by weak demand, leaving social inventory only slightly higher this week and broadly stable overall. Overall, weak end-use demand in the off-season and weaker futures that dragged on market transactions were the core causes of this week's slight inventory buildup. Meanwhile, typhoon-related disruptions reduced arrivals and effectively curbed any sharp inventory accumulation, ultimately resulting in a slight buildup with overall stability. At this stage, the off-season fundamentals of stainless steel still dominate the market, and end-use demand shows no signs of recovery yet...

SMM, August 13: This week, stainless steel social inventory shifted from prior destocking to a slight buildup, with the overall inventory center basically stable and off-season inventory pressure rising marginally. Total inventory in the two core markets of Wuxi and Foshan edged up from 915,200 mt on August 6, 2026 to 915,900 mt at the latest period, up 0.08% WoW. The buildup was narrow, and overall inventory remained on a stable trend.

This week, the stainless steel market continued its traditional off-season pattern. There was still no early signal of recovery for the September-October peak season, and end-use rigid demand remained weak. During the week, SS futures pulled back repeatedly, wait-and-see sentiment among traders and downstream players strengthened, and downstream end-users mostly maintained a hand-to-mouth purchasing mode. Spot transactions in the market were overall weak, and cargo destocking efficiency was low, creating the core fundamental pressure for inventory buildup. On the supply circulation side, there were temporary offsetting factors. At the start of this week, Typhoon "Dolphin" disrupted logistics deliveries and spot arrival pace in east China, slowing market supply replenishment and effectively offsetting the inventory buildup increment from weak demand. As a result, this week’s social inventory only edged up and stayed basically stable overall.

Overall, sluggish off-season end-use demand and weakening futures that dragged on market transactions were the core causes of this week’s slight inventory buildup, while typhoon disruptions reduced arrivals and effectively suppressed sharp inventory accumulation, ultimately showing a trend of slight accumulation and stability. At present, stainless steel’s off-season fundamentals still dominate the market, end-use demand shows no signs of recovery, and the market trading atmosphere remains subdued. Meanwhile, steel mill production schedules for August continued to rise, and industry supply was steadily released. With demand not yet recovered in this mismatch, subsequent market inventory accumulation pressure will gradually become more prominent, and inventory will likely continue a mild buildup trend.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

4 hours ago

[SMM Stainless Steel Daily Review] SS Futures Fell and Pulled Back, Stainless Steel Offers Pulled Back, Market Trading Was Sluggish

[SMM Stainless Steel Daily Review] SS Futures Pull Back; Stainless Steel Quotes Retreat; Market Trading Sluggish SMM, August 13 – SS futures moved lower and pulled back overall, dragged by broad weakness in nonferrous metals, with SS moving down in tandem. As of the close, the most-traded SS futures contract settled at 14,385 yuan/mt. In the spot market, dragged by the pullback in SS futures and lower guidance prices at a major stainless steel mill, 304 stainless steel quotes pulled back. However, the price pullback turned market sentiment pessimistic; downstream purchasing was cautious, and intraday inquiries and deals were weak. The most-traded SS futures contract. At 10:15 a.m., SS2610 stood at 14,395 yuan/mt, down 160 yuan/mt from the previous trading day. In Wuxi, spot premiums for 304/2B were in the 475-675 yuan/mt range. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi was flat; for cold-rolled mill-edge 304/2B coil, average prices fell by 125 yuan/mt in Wuxi and by 175 yuan/mt in Foshan; cold-rolled 316L/2B coil in Wuxi was flat; for hot-rolled 316L/NO.1 coil, quotes in Wuxi were flat; and cold-rolled 430/2B coil in Wuxi and Foshan was flat. This week, stainless steel futures were disrupted by both industry news and capital flows, showing wild swings overall, with a fierce tug-of-war between longs and shorts. During the week, news about additional nickel ore quotas under Indonesia’s RKAB repeatedly disrupted market expectations. Combined with shifts in capital flows in futures, SS futures rose initially before pulling back, briefly testing the 15,100 yuan/mt level mid-week, but subsequently, as expectations of growth in nickel ore quotas heated up...

4 hours ago

Aug 12, 2026 15:51

[SMM Stainless Steel Daily Review] SS futures consolidated on a strong note, spot stainless steel remained stable with off-season rigid demand transactions.

[SMM Stainless Steel Daily Comment] SS Futures Consolidate on a Strong Note; Spot Stainless Steel Holds Steady with Off-Season Need-Based Deals SMM reported on August 12: SS futures showed a consolidation pattern on a strong note overall, though gains were rather limited. As of the close, the most-traded SS futures contract settled at 14,535 yuan/mt. In the spot market, although SS futures edged up, spot quotes did not show notable fluctuations, with a focus on stable quotes and active selling. Market inquiry activity picked up somewhat, but against the backdrop of the demand off-season, actual transactions remained need-based. The most-traded SS futures contract. At 10:15 a.m., SS2610 was at 14,555 yuan/mt, up 35 yuan/mt from the previous trading day. Spot premiums for 304/2B in the Wuxi region were in the range of 315-765 yuan/mt. In the spot market, the average price of Wuxi cold-rolled 201/2B coil was stable; for cold-rolled raw edge 304/2B coil, average prices were flat in Wuxi and Foshan; cold-rolled 316L/2B coil prices in Wuxi were unchanged; for hot-rolled 316L/NO.1 coil, quotes in Wuxi were flat; and cold-rolled 430/2B coil prices in both Wuxi and Foshan were unchanged. This week, stainless steel futures were disrupted by both industry news and capital flows, experiencing wild swings with an intense tug-of-war between longs and shorts. News about additional nickel ore quotas under Indonesia’s RKAB repeatedly disturbed market expectations during the week, and with shifting capital flows in futures, SS futures rose first and then fell, briefly testing the 15,100 yuan/mt mark mid-week. However, as expectations of growth in nickel ore quotas heated up, bulls’ confidence evaporated, and futures pulled back to a weaker level…

Aug 12, 2026 15:51

Aug 12, 2026 15:24

Production Lines Resume Production and Go into Operation! Inner Mongolia Qinjin New Materials Completes Entire Stainless Steel Industry Chain

Production Line Resumes Production and Launches! Inner Mongolia Qinjin New Materials Completes Stainless Steel Entire Industry Chain On August 6, good news came from the Naiman Banner Industrial Park: the stainless steel hot-rolling and pickling production line of Inner Mongolia Qinjin New Materials Group successfully completed commissioning and officially resumed production and launched, with the first batch of qualified stainless steel hot-rolled pickled coils successfully rolling off the line. The successful launch of this production line marks that the Qinjin Group's "ferroalloy—stainless steel smelting—hot rolling—annealing—pickling" integrated stainless steel entire industry chain system is fully ready for production and operation. It is reported that Inner Mongolia Qinjin New Materials Group Co., Ltd. was established in April 2017, is affiliated with Hebei Bishi Group, and is located in the Naiman Banner Nickel-based Circular Economy Industrial Park. The enterprise deeply cultivates the green and low-carbon new materials field, leveraging regional clean energy advantages, and has laid out and constructed a series of production lines including nickel-iron alloy, SiMn alloy, high-carbon ferrochrome, stainless steel smelting, hot rolling, pickling, etc., building a closed-loop, complete, green, and efficient nickel-based new materials entire industry chain production system. This key project covers a total area of nearly 10,000 mu, with an estimated total investment of 21 billion yuan, demonstrating prominent industrial scale and development potential. Upon full production, the project is expected to achieve an annual total industrial output value of 70 billion yuan, generate annual tax revenue of 3.5 billion yuan, and directly create jobs for more than 15,000 people. Leveraging the cost advantages, technology advantages, and industrial radiation advantages brought by the entire industry chain integration, it boosts the collaborative development of related industries such as stainless steel deep processing, supporting processing, logistics transportation, and equipment operation and maintenance, helping the Naiman Banner stainless steel industrial cluster to accelerate quality improvement, capacity expansion and upgrade, and enter the fast lane of high-quality development.

Aug 12, 2026 15:24