【SMM Analysis】Weekly Review of Indonesian Nickel Market - May 8

Published: May 8, 2026 18:25

Nickel Ore

"Transition in Pricing Systems and Standardization of Pyrometallurgical Ore Benchmarks; Convergence of Iron, Cobalt, and Chrome Elements"

1. Price Dynamics and HMA Revisions The Indonesian nickel market experienced overall price volatility this week. The Ministry of Energy and Mineral Resources (ESDM) has officially released the Nickel Mineral Benchmark Price (HMA) for the first half of May 2026.

  • Nickel HMA: $17,802/dmt (up $868.57 or 5.13% from $16,933.57 in late April).

  • Cobalt HMA: $55,854/dmt.

  • Iron Ore HMA: $1.56/dmt.

  • Chrome Ore HMA: $6.37/dmt.

Current port-delivered prices for 1.6% grade pyrometallurgical ore (saprolite) stand at $74.5–$77.5/wmt, an increase of $1 from last week, remaining largely stable. In contrast, 1.2% grade hydrometallurgical ore (limonite) is priced at approximately $28.33/wmt, down $2 from the previous week.

2. Supply-Demand Fundamentals and Weather Impacts

  • Pyrometallurgical Ore: As the rainy season concludes in Halmahera and Sulawesi, mine production is expected to rebound significantly in May. Despite RKAB approvals reaching 90%, spot supply for high-grade saprolite remains tight. However, market expectations for easing supply have strengthened. Notably, the average grade of ore accepted by smelters has begun to trend downward. While the decline is not yet significant, some smelters have started blending low-grade ore to mitigate the pressure of high-grade shortages and surging costs. Current pricing follows either a "fixed price" or "HPM + $7–$10 premium" model. Furthermore, some smelters are implementing standardized benchmarks for pyrometallurgical ore (Cobalt 0.05%, Iron 20%, Chrome 1%), regardless of actual ore variations. Bon have shrunk to minimal levels as most are now covered by fixed premiums.

  • Hydrometallurgical Ore: Limonite prices have trended downward, failing to follow the uptick in the new HPM. Demand is under pressure due to potential MHP production cuts caused by a sulfuric acid shortage in May. With relatively stable inventories, smelters continue to exert strong downward pressure on prices.

3. SMM Internal Estimates The new pricing formula has led to increased price divergence and amplified volatility, particularly influenced by higher associated cobalt content in certain ores. SMM calculations show that the new HPM for 1.2% grade limonite is approximately $47.82, significantly higher than current market assessments. The new HPM for 1.6% grade saprolite is $64.85; the inclusion of higher cobalt content in the new formula has markedly amplified price fluctuations. While actual market transaction prices currently remain above this benchmark, the gap is steadily narrowing.

4. Regulatory Quotas (RKAB) and Market Outlook According to the ESDM, RKAB approvals for 2026 have reached approximately 90%. SMM statistics indicate that the total approved quota for Indonesian nickel ore stands at roughly 230–240 million wmt. The final quota is widely expected to be finalized by the end of April.

Due to the convergence of reduced RKAB expectations, resource uncertainty, and high-grade ore shortages, some smelters have increased trade dividends and premiums to secure supply. The market is closely monitoring Weda Bay Nickel (WBN). Due to a severely depleted RKAB quota for 2026, WBN plans to enter a "maintenance and care" phase starting in May. The company is actively pursuing a quota increase to alleviate the ore shortage at the IWIP industrial park. During this period, its downstream NPI plants will consume existing strategic inventories to maintain operations.

5. Regulatory Revisions: PP 19/2025 On May 8, the Directorate General of Mineral and Coal held a public hearing on the revision of PP 19/2025, seeking feedback on adjustments to mineral royalty rates.

  • Nickel Ore: The revision proposes lowering the minimum HMA threshold from <$18,000/t to <$16,000/t, and the maximum threshold from ≥$31,000/t to ≥$26,000/t. The tax tiers would be refined from 5 to 6 levels, with rates ranging from 14% to 19%.

  • Impact: Based on today’s Nickel HMA of $17,802, the applicable royalty rate would rise from 14% to 15% if the revision is implemented.

  • Additional Provisions: A 2% independent levy is proposed for cobalt in nickel matte and non-nickel smelting products, while a 2.5% tax rate is proposed for alloy pig iron. The impact on mainstream NPI projects will depend on Indonesia’s final product classification criteria.


Nickel Pig Iron

"NPI Average Prices Rally Strongly; Market Enters High-Level Deadlock"


The average price of SMM 10-12% NPI average price increased by RMB 30.5 per nickel unit week-on-week to RMB 1150.5 per nickel unit (ex-works, tax included), while the Indonesia NPI FOB index increased by USD 3.58 USD per nickel unit to an average of USD 146.78 per nickel unit. This week, the high-nickel pig iron market first declined and then rose. This week, favorable policies and exchange movements drove prices steadily higher, pushing the price center further up. However, by the end of the week, the market transitioned from a unilateral uptrend into a high-level deadlock. Upstream producers maintained a strong stance on pricing, with some anchoring their target at RMB 1,200/nickel unit and showing a high reluctance to sell. Conversely, downstream stainless steel mills showed weak acceptance of these high prices. Having completed their initial restocking, these mills saw a decline in procurement appetite, with the maximum acceptable price being limited. Additionally, a correction in the exchange market fueled "fear of heights" (market caution); despite active inquiries, actual transaction volumes were significantly lower than those seen before the holiday. The price gap between high and low-grade materials widened further, intensifying the structural divergence of supply. Looking ahead, while cost support remains, demand follow-through is insufficient. NPI prices are expected to remain in a high-level tug-of-war in the short term.

Based on high-nickel pig iron cash costs calculated from nickel ore prices 25 days ago, smelter profit margins continued to recover this week, with many operations returning to profitability. On the raw material side, auxiliary material prices rose, while ore prices remained stable in the Philippines and saw a slight correction in Indonesia. Overall, the expansion of domestic smelter profits this week was primarily driven by the upward shift in NPI prices coupled with lower raw material costs. For next week, raw material prices are unlikely to see significant increases, and NPI prices are expected to remain at high levels, which should lead to further improvements in smelter profit margins.​​​​​​​

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[SMM Nickel Market Flash] Indonesia Nickel Industry Seeks Clarity on Whether NPI Falls Under Mandatory DSI Export Rule
2 hours ago
[SMM Nickel Market Flash] Indonesia Nickel Industry Seeks Clarity on Whether NPI Falls Under Mandatory DSI Export Rule
Read More
[SMM Nickel Market Flash] Indonesia Nickel Industry Seeks Clarity on Whether NPI Falls Under Mandatory DSI Export Rule
[SMM Nickel Market Flash] Indonesia Nickel Industry Seeks Clarity on Whether NPI Falls Under Mandatory DSI Export Rule
The Forum Industri Nikel Indonesia (FINI) has formally requested government clarification on the scope of ferro alloy products that will be required to export through PT Danantara Sumberdaya Indonesia (DSI), Indonesia's newly established single-window export body. FINI Chairman Arif Perdana Kusumah said the industry is still awaiting an official commodity list, with the key open question being whether the mandatory DSI routing applies only to ferronickel (FeNi) or also to nickel pig iron (NPI). Ferronickel, a nickel-iron alloy with typical nickel content of 20-40%, is a key feedstock for stainless steel. The uncertainty adds to operational planning challenges for NPI producers as the DSI framework takes shape.
2 hours ago
[SMM Nickel Market Flash] Harita Nickel Reports Q1 2026 Revenue of Rp6.81T (~$418M), Full-Year 2025 at Rp29.63T
2 hours ago
[SMM Nickel Market Flash] Harita Nickel Reports Q1 2026 Revenue of Rp6.81T (~$418M), Full-Year 2025 at Rp29.63T
Read More
[SMM Nickel Market Flash] Harita Nickel Reports Q1 2026 Revenue of Rp6.81T (~$418M), Full-Year 2025 at Rp29.63T
[SMM Nickel Market Flash] Harita Nickel Reports Q1 2026 Revenue of Rp6.81T (~$418M), Full-Year 2025 at Rp29.63T
PT Trimegah Bangun Persada (NCKL), known as Harita Nickel, reported Q1 2026 revenue of Rp6.81 trillion (~$418 million) and full-year 2025 revenue of Rp29.63 trillion (~$1.82 billion), with all production lines — nickel ore mining, RKEF pyrometallurgy, and HPAL hydrometallurgy producing MHP and nickel sulphate — running on target. The company said it is maintaining a measured operational approach across its integrated value chain amid a challenging global nickel market. On ESG, Harita reported Q1 2026 emissions avoidance of 977,278 tCO2e, up 37% year-on-year, supported by waste heat recovery, biosolar use, and coal gasification technology. The company is also advancing IRMA corrective actions and preparing for RMAP supply chain due diligence audit.
2 hours ago
[SMM Nickel Market Flash] First Atlantic Gets Newfoundland Permit to Advance Awaruite Ni-Co Project and Geologic H2 Test
3 hours ago
[SMM Nickel Market Flash] First Atlantic Gets Newfoundland Permit to Advance Awaruite Ni-Co Project and Geologic H2 Test
Read More
[SMM Nickel Market Flash] First Atlantic Gets Newfoundland Permit to Advance Awaruite Ni-Co Project and Geologic H2 Test
[SMM Nickel Market Flash] First Atlantic Gets Newfoundland Permit to Advance Awaruite Ni-Co Project and Geologic H2 Test
First Atlantic Nickel & Cobalt Corp. has received a supplemental exploration permit from the Government of Newfoundland and Labrador for its wholly owned Pipestone XL Nickel-Cobalt Alloy Project, covering a 30-kilometre ophiolite complex. The permit authorizes wellbore water injection, additional drilling, and Electrical Resistivity Tomography surveys. The project targets awaruite (Ni3Fe), a naturally occurring nickel-iron-cobalt alloy (~77% nickel) that requires no smelting, roasting, or acid leaching — eliminating processing steps typical of sulphide or laterite ore. The permit also advances a secondary initiative to stimulate geologic hydrogen production by injecting water into serpentinizing ultramafic rock, developed in collaboration with the Colorado School of Mines.
3 hours ago
【SMM Analysis】Weekly Review of Indonesian Nickel Market - May 8 - Shanghai Metals Market (SMM)